Washer Type Washer Type |
|---|
 | Beveled |
 | For Cross- Bracing |
 | Leveling for I- Beams |
Material Material |
|---|
|
|
Width Width |
|---|
ID ID |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Maximum Load Maximum Load |
|---|
|
|
Specifications Met Specifications Met |
|---|
Trade Size Trade Size |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Number of Pieces Number of Pieces |
|---|
|
About Washers
More
Washers for Cross-Bracing
Connect cross-bracing rods or cables to structural beams. These washers have a curved top surface that lets rods pass through and be secured with a nut at different angles. The flat bottom surface sits flush against structural beams. Washers have a locking tab that keeps them in place when force is applied. They’re also known as hillside washers.
For technical drawings and 3-D models, click on a part number.
| For Shaft Diameter | Length | Width | Maximum Load, lbs. | Hardness | Color | Features | Each | |
Cast Iron | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/8" | 1 3/4" | 1.188" | 7,400 | Not Rated | Gray | Locking Tab | 00000000 | 00000 |
| 1/2" | 2" | 1.313" | 13,500 | Not Rated | Gray | Locking Tab | 00000000 | 0000 |
| 5/8" | 2 1/4" | 1.438" | 21,500 | Not Rated | Gray | Locking Tab | 00000000 | 0000 |
| 3/4" | 2 3/8" | 1.625" | 32,000 | Not Rated | Gray | Locking Tab | 00000000 | 0000 |
| 7/8" | 2 7/8" | 1.813" | 44,000 | Not Rated | Gray | Locking Tab | 00000000 | 0000 |
| 1" | 3 1/8" | 2.000" | 58,000 | Not Rated | Gray | Locking Tab | 00000000 | 0000 |
| 1 1/8", 1 1/4" | 4 13/16" | 2.438" | 92,000 | Not Rated | Gray | Locking Tab | 00000000 | 00000 |
Flanged Washers for Cross-Bracing
These washers have a flange to spread force across structural beams better than standard washers for cross-bracing rods and cables. Their top surface is curved to let rods pass through and be secured with a nut at different angles. The bottom surface is flat to sit flush with structural beams. These washers have a locking tab that keeps them in place when force is applied. They’re also known as hillside washers.
Galvanized washers resist corrosion better than primed washers.
For technical drawings and 3-D models, click on a part number.
Leveling Washers for I-Beams
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Black-oxide iron washers have a matte-black finish that prevents corrosion in dry environments.
Hot-dipped galvanized iron washers are corrosion resistant in wet environments.
Aluminum washers are lightweight and corrosion resistant in wet environments.
18-8 stainless steel washers have good chemical resistance and may be mildly magnetic.
For technical drawings and 3-D models, click on a part number.
Thick. | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Screw Size | ID | Wd. | (A) | (B) | Hardness | Pkg. Qty. | Pkg. | |
Iron | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B62 | 25 | 000000000 | 000000 |
| 5/16" | 0.375" | 1.000" | 0.312" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 25 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 25 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.438" | 0.188" | Rockwell B62 | 10 | 000000000 | 00000 |
| 7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1 1/8" | 1.250" | 2.250" | 0.625" | 0.250" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.375" | 2.250" | 0.719" | 0.312" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/2" | 1.625" | 3.000" | 0.812" | 0.312" | Rockwell C35 | 1 | 000000000 | 00000 |
Black-Oxide Iron | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B62 | 10 | 000000000 | 0000 |
| 5/16" | 0.375" | 1.000" | 0.313" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B62 | 5 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.438" | 0.188" | Rockwell B62 | 5 | 000000000 | 00000 |
| 7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.344" | 2.250" | 0.719" | 0.313" | Rockwell B62 | 1 | 000000000 | 0000 |
Hot-Dipped Galvanized Iron | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Rockwell B72 | 25 | 000000000 | 00000 |
| 5/16" | 0.375" | 1.000" | 0.313" | 0.141" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B62 | 10 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.438" | 0.188" | Rockwell B62 | 10 | 000000000 | 00000 |
| 7/8" | 0.938" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
| 1" | 1.062" | 2.000" | 0.562" | 0.219" | Rockwell B62 | 5 | 000000000 | 00000 |
| 1 1/8" | 1.188" | 2.250" | 0.625" | 0.281" | Rockwell B62 | 1 | 000000000 | 0000 |
| 1 1/4" | 1.344" | 2.250" | 0.719" | 0.313" | Rockwell B62 | 1 | 000000000 | 0000 |
Aluminum | ||||||||
| 1/4" | 0.312" | 0.688" | 0.219" | 0.078" | Not Rated | 5 | 000000000 | 0000 |
| 5/16" | 0.375" | 1.000" | 0.250" | 0.094" | Not Rated | 5 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.344" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
| 5/8" | 0.688" | 1.500" | 0.406" | 0.156" | Not Rated | 5 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Not Rated | 5 | 000000000 | 00000 |
Steel | ||||||||
| 1/2" | 0.546" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 5/8" | 0.702" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 3/4" | 0.827" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 7/8" | 0.952" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
| 1" | 1.140" | 1.750" | 0.438" | 0.188" | Rockwell C38 | 5 | 000000000 | 00000 |
18-8 Stainless Steel | ||||||||
| 1/4" | 0.312" | 0.875" | 0.250" | 0.125" | Rockwell B45 | 5 | 000000000 | 00000 |
| 5/16" | 0.375" | 0.875" | 0.250" | 0.125" | Rockwell B45 | 5 | 000000000 | 00000 |
| 3/8" | 0.438" | 1.250" | 0.312" | 0.125" | Rockwell B45 | 1 | 000000000 | 0000 |
| 1/2" | 0.562" | 1.250" | 0.344" | 0.156" | Rockwell B45 | 1 | 000000000 | 0000 |
| 5/8" | 0.688" | 1.500" | 0.375" | 0.125" | Rockwell B45 | 1 | 000000000 | 00000 |
| 3/4" | 0.812" | 1.500" | 0.469" | 0.219" | Rockwell B45 | 1 | 000000000 | 00000 |
Metric Leveling Washers for I-Beams
Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
Zinc-plated steel washers are coated for corrosion resistance in wet environments.
Hot-dipped galvanized steel washers are ten times more corrosion resistant than zinc-plated washers.
18-8 stainless steel washers are the most corrosion-resistant option.
For technical drawings and 3-D models, click on a part number.
Thick., mm | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Screw Size | ID, mm | Wd., mm | (A) | (B) | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
| M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 0000 |
| M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 5 | 000000000 | 00000 |
| M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
Hot-Dipped Galvanized Steel | |||||||||
| M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 10 | 000000000 | 00000 |
| M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
| M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
| M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 5 | 000000000 | 0000 |
| M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
18-8 Stainless Steel | |||||||||
| M8 | 9.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M10 | 11.0 | 22.0 | 4.6 | 1.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M12 | 14.0 | 26.0 | 6.2 | 2.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M16 | 18.0 | 32.0 | 7.5 | 2.5 | Rockwell B52 | DIN 435 | 1 | 000000000 | 0000 |
| M20 | 22.0 | 40.0 | 9.2 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
| M24 | 26.0 | 56.0 | 10.8 | 3.0 | Rockwell B52 | DIN 435 | 1 | 000000000 | 00000 |
Faucet Washers
For technical drawings and 3-D models, click on a part number.
Beveled | |||||
|---|---|---|---|---|---|
| Faucet Washer Trade Size | OD | Temp. Range, °F | Pkg. Qty. | Pkg. | |
Buna-N Rubber | |||||
| 1/4" Small (00) | 1/2" | -30° to 200° | 100 | 0000000 | 000000 |
| 1/4" Medium (0) | 17/32" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" Regular | 9/16" | -30° to 200° | 100 | 0000000 | 00000 |
| 1/4" Large | 19/32" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" Regular | 5/8" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" Regular | 3/4" | -30° to 200° | 100 | 0000000 | 00000 |
| 3/8" Large | 11/16" | -30° to 200° | 100 | 0000000 | 00000 |
Faucet Washer Assortments
Beveled | ||||
|---|---|---|---|---|
| No. of Pieces | Temp. Range, °F | Includes | Each | |
Buna-N Rubber | ||||
| 160 | -30° to 200° | 9 Sizes: 1/4" Small (00), 1/4" Medium (0), 1/4" Regular, 1/4" Large, 3/8" Regular, 3/8" Large, 1/2" Regular, 5/8" Regular, 3/4" Regular | 0000000 | 000000 |