McMaster-Carr logo
    Filter by
    Shank Type
    Industrial Info Compare
    Drill Bit Point Type
    Industrial Info Compare
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Number of Pieces
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    242 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    Carbide-Tipped Drill Bits for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    5/32"
    		0.1563"
    		4 5/8"2"ANSI B212.15000000000000
    5/32"
    		0.1563"
    		8 5/8"6"ANSI B212.15000000000000
    3/16"
    		0.1875"
    		4 3/8"2"ANSI B212.1500000000000
    3/16"
    		0.1875"
    		6 3/8"4"ANSI B212.1500000000000
    3/16"
    		0.1875"
    		8 5/8"6"ANSI B212.1500000000000
    3/16"
    		0.1875"
    		10 5/8"8"ANSI B212.15000000000000
    3/16"
    		0.1875"
    		12 5/8"10"ANSI B212.15000000000000
    3/16"
    		0.1875"
    		14 5/8"12"ANSI B212.15000000000000
    7/32"
    		0.2188"
    		4 3/4"2.5"ANSI B212.1500000000000
    7/32"
    		0.2188"
    		6 5/8"4"ANSI B212.1500000000000
    7/32"
    		0.2188"
    		8 5/8"6"ANSI B212.1500000000000
    7/32"
    		0.2188"
    		10 1/4"8"ANSI B212.15000000000000
    7/32"
    		0.2188"
    		14 5/8"12"ANSI B212.15000000000000
    1/4"
    		0.25"
    		4 3/8"2"ANSI B212.1500000000000
    1/4"
    		0.25"
    		6 3/8"4"ANSI B212.1500000000000
    1/4"
    		0.25"
    		8 5/8"6"ANSI B212.1500000000000
    1/4"
    		0.25"
    		11 5/8"9"ANSI B212.15000000000000
    1/4"
    		0.25"
    		12 1/4"9.63"ANSI B212.15000000000000
    1/4"
    		0.25"
    		14 5/8"12"ANSI B212.15000000000000
    1/4"
    		0.25"
    		20 5/8"18"ANSI B212.15000000000000
    1/4"
    		0.25"
    		26"24"ANSI B212.1500000000000
    9/32"
    		0.2813"
    		8"6"ANSI B212.1500000000000
    5/16"
    		0.3125"
    		6 5/8"4"ANSI B212.1500000000000
    5/16"
    		0.3125"
    		9 3/4"7.5"ANSI B212.15000000000000
    5/16"
    		0.3125"
    		12 5/8"10"ANSI B212.15000000000000
    3/8"
    		0.375"
    		6 5/8"4"ANSI B212.1500000000000
    3/8"
    		0.375"
    		10 5/8"8"ANSI B212.15000000000000
    3/8"
    		0.375"
    		12 5/8"10"ANSI B212.15000000000000
    3/8"
    		0.375"
    		20 5/8"18"ANSI B212.15000000000000
    3/8"
    		0.375"
    		24"22"ANSI B212.15000000000000
    3/8"
    		0.375"
    		36"34"ANSI B212.15000000000000
    7/16"
    		0.4375"
    		6 5/8"4"ANSI B212.15000000000000
    7/16"
    		0.4375"
    		12 5/8"10"ANSI B212.15000000000000
    7/16"
    		0.4375"
    		18 5/8"16"ANSI B212.15000000000000
    1/2"
    		0.5"
    		6 5/8"4"ANSI B212.1500000000000
    1/2"
    		0.5"
    		10 5/8"8"ANSI B212.15000000000000
    1/2"
    		0.5"
    		12 5/8"10"ANSI B212.15000000000000
    1/2"
    		0.5"
    		18 5/8"16"ANSI B212.15000000000000
    1/2"
    		0.5"
    		24"22"ANSI B212.15000000000000
    1/2"
    		0.5"
    		38"36"ANSI B212.15000000000000
    9/16"
    		0.5625"
    		6 3/4"4"ANSI B212.15000000000000
    9/16"
    		0.5625"
    		10 1/8"7.88"ANSI B212.15000000000000
    9/16"
    		0.5625"
    		12 3/4"10"ANSI B212.15000000000000
    9/16"
    		0.5625"
    		18 3/4"16"ANSI B212.15000000000000
    5/8"
    		0.625"
    		6 3/4"4"ANSI B212.15000000000000
    5/8"
    		0.625"
    		9 3/4"7"ANSI B212.15000000000000
    5/8"
    		0.625"
    		12 3/4"10"ANSI B212.15000000000000
    5/8"
    		0.625"
    		18 3/4"16"ANSI B212.15000000000000
    5/8"
    		0.625"
    		24"22"ANSI B212.15000000000000
    5/8"
    		0.625"
    		36"34"ANSI B212.15000000000000
    11/16"
    		0.6875"
    		12 3/4"10"ANSI B212.15000000000000
    3/4"
    		0.75"
    		9 3/4"7"ANSI B212.15000000000000
    3/4"
    		0.75"
    		12 3/4"10"ANSI B212.15000000000000
    3/4"
    		0.75"
    		18 3/4"16"ANSI B212.15000000000000
    3/4"
    		0.75"
    		24"22"ANSI B212.15000000000000
    13/16"
    		0.8125"
    		12 3/4"10"ANSI B212.15000000000000
    27/32"
    		0.8438"
    		8 3/4"6"ANSI B212.15000000000000
    7/8"
    		0.875"
    		9 3/4"7"ANSI B212.15000000000000
    7/8"
    		0.875"
    		12 3/4"10"ANSI B212.15000000000000
    7/8"
    		0.875"
    		18 3/4"16"ANSI B212.15000000000000
    1"
    		1"
    		10 3/4"8"ANSI B212.15000000000000
    1"
    		1"
    		13 1/8"10"ANSI B212.15000000000000
    1"
    		1"
    		18 3/4"16"ANSI B212.15000000000000
    1"
    		1"
    		25"22"ANSI B212.15000000000000
    1"
    		1"
    		30"28"ANSI B212.15000000000000
    1 1/8"
    		1.125"
    		12 3/4"10"ANSI B212.15000000000000
    1 1/8"
    		1.125"
    		18 3/4"16"ANSI B212.15000000000000
     
    Multipoint
    5/8"
    		0.625"
    		8"6"ANSI B212.15000000000000
    5/8"
    		0.625"
    		14"12"ANSI B212.15000000000000
    5/8"
    		0.625"
    		18"16"ANSI B212.15000000000000
    5/8"
    		0.625"
    		25"22"ANSI B212.15000000000000
    5/8"
    		0.625"
    		38"36"ANSI B212.150000000000000
    3/4"
    		0.75"
    		8"6"ANSI B212.15000000000000
    3/4"
    		0.75"
    		14"12"ANSI B212.15000000000000
    3/4"
    		0.75"
    		18"16"ANSI B212.15000000000000
    3/4"
    		0.75"
    		25"22"ANSI B212.150000000000000
    3/4"
    		0.75"
    		38"36"ANSI B212.150000000000000
    7/8"
    		0.875"
    		8"6"ANSI B212.15000000000000
    7/8"
    		0.875"
    		14"12"ANSI B212.15000000000000
    7/8"
    		0.875"
    		18"16"ANSI B212.15000000000000
    7/8"
    		0.875"
    		38"36"ANSI B212.150000000000000
    1"
    		1"
    		8"6"ANSI B212.15000000000000
    1"
    		1"
    		18"16"ANSI B212.15000000000000
    1"
    		1"
    		25"22"ANSI B212.150000000000000
    1"
    		1"
    		38"36"ANSI B212.150000000000000
    1 1/8"
    		1.125"
    		8"6"ANSI B212.15000000000000
    1 1/8"
    		1.125"
    		18"16"ANSI B212.15000000000000
     
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    3/8"
    		0.375"
    		10"4"ANSI B212.150000000000000
    3/8"
    		0.375"
    		14"8"ANSI B212.150000000000000
    3/8"
    		0.375"
    		18"12"ANSI B212.150000000000000
    7/16"
    		0.4375"
    		14"8"ANSI B212.150000000000000
    1/2"
    		0.5"
    		14"8"ANSI B212.150000000000000
    1/2"
    		0.5"
    		18"12"ANSI B212.15000000000000
    1/2"
    		0.5"
    		22"16"ANSI B212.150000000000000
    1/2"
    		0.5"
    		28"22"ANSI B212.150000000000000
    9/16"
    		0.5625"
    		14"8"ANSI B212.150000000000000
    11/16"
    		0.6875"
    		14"8"ANSI B212.15000000000000
     
    Multipoint
    5/8"
    		0.625"
    		14"8"ANSI B212.150000000000000
    5/8"
    		0.625"
    		18"12"ANSI B212.150000000000000
    5/8"
    		0.625"
    		22"16"ANSI B212.150000000000000
    5/8"
    		0.625"
    		42"36"ANSI B212.1500000000000000
    3/4"
    		0.75"
    		14"8"ANSI B212.150000000000000
    3/4"
    		0.75"
    		18"12"ANSI B212.150000000000000
    3/4"
    		0.75"
    		22"16"ANSI B212.150000000000000
    3/4"
    		0.75"
    		42"36"ANSI B212.1500000000000000
    3/4"
    		0.75"
    		54"48"ANSI B212.150000000000000
    3/4"
    		0.75"
    		66"60"ANSI B212.150000000000000
    7/8"
    		0.875"
    		14"8"ANSI B212.150000000000000
    7/8"
    		0.875"
    		18"12"ANSI B212.150000000000000
    7/8"
    		0.875"
    		22"16"ANSI B212.150000000000000
    7/8"
    		0.875"
    		42"36"ANSI B212.1500000000000000
    1"
    		1"
    		14"8"ANSI B212.150000000000000
    1"
    		1"
    		18"12"ANSI B212.150000000000000
    1"
    		1"
    		22"16"ANSI B212.1500000000000000
    1"
    		1"
    		42"36"ANSI B212.1500000000000000
    1 1/8"
    		1.125"
    		14"8"ANSI B212.150000000000000
    1 1/8"
    		1.125"
    		22"16"ANSI B212.1500000000000000
    1 1/8"
    		1.125"
    		42"36"ANSI B212.1500000000000000
    1 1/4"
    		1.25"
    		14"8"ANSI B212.1500000000000000
    1 1/4"
    		1.25"
    		22"16"ANSI B212.1500000000000000
    1 3/8"
    		1.375"
    		22"16"ANSI B212.1500000000000000
    1 1/2"
    		1.5"
    		22"16"ANSI B212.1500000000000000
    1 1/2"
    		1.5"
    		42"36"ANSI B212.1500000000000000
     

    Tapping Screw Installation Drill Bits for Masonry and Concrete

    Create an undersized hole so concrete tapping screws fit tightly once they're threaded into place. These bits are slightly smaller than the matching screw size. They have a carbide tip that resists wear and heat to stay sharp.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Tapping Screw Installation Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    For Screw
    Size
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Each
    Uncoated
     
    Standard Point
    3/16"
    		5/32"
    		0.1563"
    		7"4"000000000000
    3/16"
    		3/16"
    		0.1875"
    		4"2"00000000000
    3/16"
    		3/16"
    		0.1875"
    		8 1/2"6 1/2"000000000000
    3/16"
    		3/16"
    		0.1875"
    		10"8"000000000000
    3/16"
    		3/16"
    		0.1875"
    		12"10"000000000000
    3/16"
    		3/16"
    		0.1875"
    		14"12"000000000000
    7/32"
    		7/32"
    		0.2188"
    		6"4"00000000000
    7/32"
    		7/32"
    		0.2188"
    		10"8"000000000000
    1/4"
    		3/16"
    		0.1875"
    		6"3 1/2"0000000000000
    1/4"
    		1/4"
    		0.25"
    		4 1/2"2"0000000000000
    1/4"
    		1/4"
    		0.25"
    		8 1/2"6 1/2"00000000000
    1/4"
    		1/4"
    		0.25"
    		12"10"000000000000
    1/4"
    		1/4"
    		0.25"
    		14"12"000000000000
    5/16"
    		1/4"
    		0.25"
    		6"4"00000000000000
    5/16"
    		5/16"
    		0.3125"
    		6"4"00000000000
    5/16"
    		5/16"
    		0.3125"
    		12"10"000000000000
    3/8"
    		3/8"
    		0.375"
    		6"4"00000000000
    3/8"
    		3/8"
    		0.375"
    		10"8"000000000000
    3/8"
    		3/8"
    		0.375"
    		12"10"000000000000
    3/8"
    		3/8"
    		0.375"
    		18"16"000000000000
    3/8"
    		3/8"
    		0.375"
    		24"22"000000000000
    7/16"
    		7/16"
    		0.4375"
    		6"4"000000000000
    7/16"
    		7/16"
    		0.4375"
    		12"10"000000000000
    7/16"
    		7/16"
    		0.4375"
    		18"16"000000000000
    1/2"
    		1/2"
    		0.5"
    		6"3 1/2"000000000000
    1/2"
    		1/2"
    		0.5"
    		10"7"000000000000
    1/2"
    		1/2"
    		0.5"
    		12"9"000000000000
    1/2"
    		1/2"
    		0.5"
    		18"15"000000000000
    1/2"
    		1/2"
    		0.5"
    		24"20 1/2"000000000000
    9/16"
    		9/16"
    		0.5625"
    		6"3 1/2"000000000000
    9/16"
    		9/16"
    		0.5625"
    		12"9"000000000000
    9/16"
    		9/16"
    		0.5625"
    		18"15"000000000000
    5/8"
    		5/8"
    		0.625"
    		8"5"000000000000
    5/8"
    		5/8"
    		0.625"
    		12"9"000000000000
    5/8"
    		5/8"
    		0.625"
    		18"14 1/2"000000000000
    5/8"
    		5/8"
    		0.625"
    		24"20 1/2"000000000000
    3/4"
    		3/4"
    		0.75"
    		8"4 1/2"000000000000
    3/4"
    		3/4"
    		0.75"
    		12"9"000000000000
    3/4"
    		3/4"
    		0.75"
    		18"14 1/2"000000000000
    3/4"
    		3/4"
    		0.75"
    		24"20 1/2"000000000000
    7/8"
    		7/8"
    		0.875"
    		8"5"000000000000
    7/8"
    		7/8"
    		0.875"
    		18"15"000000000000
    1"
    		1"
    		1"
    		10"7"000000000000
    1"
    		1"
    		1"
    		18"14 1/2"000000000000
    1 1/8"
    		1 1/8"
    		1.125"
    		10"5"000000000000
    1 1/8"
    		1 1/8"
    		1.125"
    		18"13"000000000000
     

    Rebar-Cutting Carbide-Tipped Drill Bits

    No need to move the hole when you encounter rebar in concrete—swap out your masonry bit for one of these cutters. They have a carbide tip that resists wear to stay sharp. Once you're through the rebar, resume drilling with the masonry bit.
    SDS-Plus Shank for Rotary Only Drilling
    Image of Product. Front orientation. Drill Bits. Rebar-Cutting Carbide-Tipped Drill Bits, SDS-Plus Shank for Rotary Only Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The hex shape reduces the chance of the shank slipping in the chuck. Pair these bits with hand-held power drills and hammer drills set to rotary-only mode. Because they use rotary action only, they require more pressure to grind up material than other bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    3/8"
    		0.375"
    		8"6"ANSI B212.1500000000000000
    3/8"
    		0.375"
    		12"10"ANSI B212.150000000000000
    7/16"
    		0.4375"
    		12"10"ANSI B212.150000000000000
    1/2"
    		0.5"
    		12"10"ANSI B212.150000000000000
    1/2"
    		0.5"
    		18"16"ANSI B212.150000000000000
    9/16"
    		0.5625"
    		12"10"ANSI B212.150000000000000
    5/8"
    		0.625"
    		12"10"ANSI B212.150000000000000
    5/8"
    		0.625"
    		18"16"ANSI B212.150000000000000
    11/16"
    		0.6875"
    		12"10"ANSI B212.150000000000000
    3/4"
    		0.75"
    		12"10"ANSI B212.150000000000000
    3/4"
    		0.75"
    		18"16"ANSI B212.150000000000000
    3/4"
    		0.75"
    		24"22"ANSI B212.150000000000000
    13/16"
    		0.8125"
    		12"10"ANSI B212.150000000000000
    7/8"
    		0.875"
    		12"10"ANSI B212.150000000000000
    1"
    		1"
    		12"10"ANSI B212.150000000000000
    1 1/8"
    		1.125"
    		12"10"ANSI B212.1500000000000000
    1 1/4"
    		1.25"
    		12"10"ANSI B212.1500000000000000
    1 3/8"
    		1.375"
    		12"10"ANSI B212.1500000000000000
    1 1/2"
    		1.5"
    		12"10"ANSI B212.1500000000000000
     

    Carbide-Tipped Core Drill Bits for Masonry and Concrete

    Remove a core of material with these hollow bits to make larger holes than fluted masonry bits. They're often used for installing pipe and conduit through brick and concrete. The carbide tip resists wear and heat to stay sharp.
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Core Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Pilot Drills—Cut a groove before drilling to make starting the hole easier.
    Drill Bits
    Pilot Drills
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Includes
    Each
    Each
    Uncoated
     
    Standard Point
    1 3/4"
    		1.75"
    		22"17"ANSI B212.15Core Ejector Key, Pilot Drill00000000000000000000000000000
    2"
    		2"
    		12"7"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    2"
    		2"
    		22"17"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    2 5/8"
    		2.625"
    		12"7"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    2 5/8"
    		2.625"
    		22"17"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    3 1/4"
    		3.25"
    		12"7"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    3 1/4"
    		3.25"
    		22"17"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    3 9/16"
    		3.5625"
    		12"7"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    4"
    		4"
    		22"17"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
    5"
    		5"
    		22"17"ANSI B212.15Core Ejector Key, Pilot Drill000000000000000000000000000
     

    Carbide-Tipped Drill Bit Sets for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bit Sets for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    No. of
    Pieces
    Drill Bit Size
    Drill Bit
    Point Type
    Specs. Met
    Container
    Type
    Each
    Uncoated
    53/16", 1/4", 5/16", 3/8", 1/2"
    		Standard
    		ANSI B212.15Plastic Case0000000000000
    63/16", 1/4", 5/16", 3/8", 1/2", 5/8"
    		Standard
    		ANSI B212.15Plastic Pouch000000000000
     

    Anchor Installation Drill Bits for Masonry and Concrete

    A built-in stop ensures the right drilling depth every time so drop-in anchors don't fall too far into the hole. These bits have a carbide tip that resists wear and heat to stay sharp.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Anchor Installation Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    1/4"
    		0.25"
    		4 7/8"13/16"ANSI B212.15000000000000
    3/8"
    		0.375"
    		4 3/4"11/16"ANSI B212.1500000000000
    3/8"
    		0.375"
    		5 1/8"1 1/16"ANSI B212.1500000000000
    1/2"
    		0.5"
    		4 7/8"13/16"ANSI B212.1500000000000
    1/2"
    		0.5"
    		5 3/4"1 11/16"ANSI B212.1500000000000
    5/8"
    		0.625"
    		5 1/4"1 3/16"ANSI B212.1500000000000
    5/8"
    		0.625"
    		6 1/8"2 1/16"ANSI B212.1500000000000
     

    Changeable-Size Carbide-Tipped Core Drill Bits for Masonry and Concrete

    Instead of investing in multiple bits, change the bit body to drill a different-sized hole. These hollow bits remove a large core of material from concrete, brick, and masonry for installing pipe and conduit. The carbide tip resists wear and heat to stay sharp. Bits include a pilot drill to make starting holes easier.
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Changeable-Size Carbide-Tipped Core Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Includes
    Each
    Uncoated
     
    Standard Point
    1 1/2"
    		1.5"
    		17"12"ANSI B212.15Pilot Drill000000000000000
    1 3/4"
    		1.75"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    2"
    		2"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    2 1/2"
    		2.5"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    3"
    		3"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    3 1/2"
    		3.5"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    4"
    		4"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    4 1/2"
    		4.5"
    		17"12"ANSI B212.15Pilot Drill00000000000000
    5"
    		5"
    		17"12"ANSI B212.15Pilot Drill00000000000000
     
    Accessories and Replacements for Drill Bits
    Changeable Bit Bodies
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Component
    Specs. Met
    Each
    Uncoated Carbide-Tipped Steel
    1 1/2"
    		1.5"
    		5"Bit BodyANSI B212.1500000000000000
    1 3/4"
    		1.75"
    		5"Bit BodyANSI B212.150000000000000
    2"
    		2"
    		5"Bit BodyANSI B212.150000000000000
    2 1/2"
    		2.5"
    		5"Bit BodyANSI B212.150000000000000
    3"
    		3"
    		5"Bit BodyANSI B212.150000000000000
    3 1/2"
    		3.5"
    		5"Bit BodyANSI B212.150000000000000
    4"
    		4"
    		5"Bit BodyANSI B212.150000000000000
    4 1/2"
    		4.5"
    		5"Bit BodyANSI B212.150000000000000
    5"
    		5"
    		5"Bit BodyANSI B212.150000000000000
     
    Extensions, Replacement Shanks and Replacement Pilot Drills
    Each
    6" Overall Length Extension0000000000000
    12" Overall Length Extension000000000000
    18" Overall Length Extension0000000000000
    SDS-Max Shank0000000000000
    Pilot Drill for Changeable-Size Masonry Core Drill Bit000000000000

    Dust-Collecting Carbide-Tipped Drill Bits for Masonry and Concrete

    Connect these hollow bits to a vacuum system, and they'll suck up dust while drilling. Use them to meet OSHA standards for silica dust exposure when drilling in concrete, brick, and other powdery masonry material. These bits are especially useful for cutting holes for adhesive anchors—you don't need to clean out the hole before installing. They have a titanium nitride (TiN)-coated carbide tip that resists wear and heat to stay sharp.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Contains Inset. Drill Bits. Dust-Collecting Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    For Vacuum
    Hose ID
    Each
    Titanium Nitride (TiN) Coated
     
    Standard Point
    5/8"
    		0.625"
    		15"10"1 3/8"0000000000000
    11/16"
    		0.6875"
    		18"12 1/2"1 3/8"000000000000
    3/4"
    		0.75"
    		18"12 1/2"1 3/8"000000000000
     
    SDS-Max Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Contains Inset. Drill Bits. Dust-Collecting Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Max Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Max Shank. Front orientation. SDS Max Shank.

    SDS-Max

    Shank

    The slotted shank is compatible with SDS-Max-drive rotary hammers. These bits use simultaneous rotary and hammering action to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    For Vacuum
    Hose ID
    Each
    Titanium Nitride (TiN) Coated
     
    Standard Point
    3/4"
    		0.75"
    		21"12 1/2"1 3/8"0000000000000
    13/16"
    		0.8125"
    		25"15"1 3/8"000000000000
    7/8"
    		0.875"
    		25"15"1 3/8"000000000000
    1"
    		1"
    		27"17 1/2"1 3/8"000000000000
    1 1/8"
    		1.125"
    		29"20"1 3/8"000000000000
    1 3/8"
    		1.375"
    		35"25"1 3/8"000000000000
     

    Extensions for SDS-plus-Shank Drill Bits

    Image of Product. Front orientation. Drill Bit Extensions. Extensions for SDS-plus-Shank Drill Bits.
    Image of Specification. SDS-Plus Shank. Front orientation. Extensions for SDS-plus-Shank Drill Bits.

    SDS-Plus

    Shank

    SDS-Plus shanks have two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These extensions have a quick-change mechanism for fast bit changes. Attach to the shank of a drill bit to extend its reach.
    Overall
    Lg.
    OD
    Material
    Each
    One-Piece Extensions
    18"1 3/8"Steel00000000000000
    30"1 3/8"Steel0000000000000
     
    back to top