Filter by
About Rod Ends
More
Inline Ball Joint Linkages
Use these linkages to create inline pivoting connections. The ball-and-socket design allows the ball stud to swivel. All have a liner (also known as a boot) that not only keeps out contaminants, but also acts as a cushion to reduce vibration. They don't come lubricated, so you'll need to lubricate during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap. | Material | Ball Stud Thread Direction | Each | |
Right-Hand Threaded Shank | |||||||||||
1/4"-28 | 15/16" | 1/2" | 1/4"-28 | 1" | 1/2" | 30° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
5/16"-24 | 1 3/16" | 11/16" | 5/16"-24 | 1 1/4" | 11/16" | 30° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
3/8"-24 | 1 7/16" | 13/16" | 3/8"-24 | 1 9/16" | 13/16" | 30° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
M6 × 1 mm | 23.5mm | 12.5mm | M6 × 1 mm | 26.5mm | 12.5mm | 35° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 0000 |
M8 × 1.25 mm | 29.5mm | 16.5mm | M8 × 1.25 mm | 32.5mm | 16.5mm | 35° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |
M10 × 1.5 mm | 36mm | 20mm | M10 × 1.5 mm | 39mm | 20mm | 35° | Not Rated | Zinc-Plated Carbon Steel | Right Hand | 0000000 | 00000 |