About Hinges
More
Surface-Mount Lift-Off Hinges with Holes
The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
The pin for left- or right-side mounting is permanently attached.
304 stainless steel hinges are more corrosion resistant than zinc-plated low-carbon steel and brass. They also have good chemical resistance.
In addition to good corrosion resistance, nickel-plated steel hinges have better wear resistance than zinc-plated low-carbon steel.
Aluminum hinges are about half the weight of low-carbon steel. They have mild corrosion resistance.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size  | Each | ||
Left Side Door Mounting Location | ||||||||||||||
304 Stainless Steel—Dull | ||||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | 1/8" | 304 Stainless Steel | No | 4 | No. 5 | 0000000 | 00000 |
Nickel-Plated Steel—Dull | ||||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | No. 5 | 0000000 | 0000 |
Aluminum—Dull | ||||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | 1/8" | 304 Stainless Steel | No | 4 | No. 5 | 0000000 | 0000 |
Right Side Door Mounting Location | ||||||||||||||
304 Stainless Steel—Dull | ||||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | 1/8" | 304 Stainless Steel | No | 4 | No. 5 | 0000000 | 0000 |
Nickel-Plated Steel—Dull | ||||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | No. 5 | 0000000 | 0000 |
Aluminum—Dull | ||||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | 1/8" | 304 Stainless Steel | No | 4 | No. 5 | 0000000 | 0000 |
Lift-Off Hinges without Holes
The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Capacity is based on two hinges per door. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
The pin on hinges for left- or right-side mounting is permanently attached.
304 stainless steel hinges are more corrosion resistant than zinc-plated low-carbon steel. They also have good chemical resistance.
Aluminum hinges are about half the weight of low-carbon steel. They have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Material | Pin Material | Each | ||
Left Side Door Mounting Location | |||||||||||||
Low-Carbon Steel—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | Low-Carbon Steel | Steel | 000000000 | 00000 |
304 Stainless Steel—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 304 Stainless Steel | 303 Stainless Steel | 000000000 | 0000 |
304 Stainless Steel—Polished | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 304 Stainless Steel | 303 Stainless Steel | 000000000 | 0000 |
Aluminum—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 5052 Aluminum | 303 Stainless Steel | 000000000 | 0000 |
Right Side Door Mounting Location | |||||||||||||
Low-Carbon Steel—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | Low-Carbon Steel | Steel | 000000000 | 0000 |
304 Stainless Steel—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 304 Stainless Steel | 303 Stainless Steel | 000000000 | 0000 |
304 Stainless Steel—Polished | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 304 Stainless Steel | 303 Stainless Steel | 000000000 | 0000 |
Aluminum—Dull | |||||||||||||
| 1 | 1 1/2" | 23/32" | 1 1/2" | 23/32" | 1 7/16" | 0.050" | 270° | Not Rated | 1/8" | 5052 Aluminum | 303 Stainless Steel | 000000000 | 0000 |
Adjustable-Friction Hinges
Tighten or loosen an adjustment screw to change the hinge resistance. Constant resistance through the full range of motion holds lids, panels, and doors at any angle. These hinges discourage tampering, since they can’t be taken apart without damaging the hinge. Capacity is based on one hinge per door.
Plastic hinges are a lightweight alternative to metal hinges.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | Mounting | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Ht. | Wd. | Thick. | O'all Wd. | Range of Motion | Cap., lbs. | Torque, in.-lbs. | Pin Dia. | Pin Material | Max. Temp., °F | Fasteners Included | No. of Holes | Hole Style | Screw Size | Each | |
Black Acetal Plastic | ||||||||||||||||||
| 1 11/16" | 23/32" | 0.23" | 1 11/16" | 23/32" | 0.23" | 1 7/16" | 180° | 200 | 7 | 23/64" | Polycarbonate Plastic | 150° | No | 4 | Straight | No. 8 | 0000000 | 00000 |
White Acetal Plastic | ||||||||||||||||||
| 1 11/16" | 23/32" | 0.23" | 1 11/16" | 23/32" | 0.23" | 1 7/16" | 180° | 200 | 7 | 23/64" | Polycarbonate Plastic | 150° | No | 4 | Straight | No. 8 | 0000000 | 0000 |
Plastic Friction Hinges
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation. Constant resistance through the full range of motion holds lids, panels, and doors at any angle. All of these hinges have a nonremoveable pin to deter tampering.
Acetal hinges are more moisture resistant than nylon.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Torque, in.-lbs. | Pin Dia. | Pin Material | Max. Temp., °F | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | |
White Acetal Plastic | ||||||||||||||||
| 2" | 11/16" | 2" | 11/16" | 1 7/16" | 0.256" | 270° | 1.2 | 1/2" | Acetal Plastic | Not Rated | No | 4 | Counterbored | M3 | 00000000 | 000000 |
| 2" | 11/16" | 2" | 11/16" | 1 7/16" | 0.256" | 270° | 3 | 1/2" | Acetal Plastic | Not Rated | No | 4 | Counterbored | M3 | 00000000 | 00000 |
Black Acetal Plastic | ||||||||||||||||
| 2" | 11/16" | 2" | 11/16" | 1 7/16" | 0.256" | 270° | 1.2 | 1/2" | Acetal Plastic | Not Rated | No | 4 | Counterbored | M3 | 00000000 | 00000 |
| 2" | 11/16" | 2" | 11/16" | 1 7/16" | 0.256" | 270° | 3 | 1/2" | Acetal Plastic | Not Rated | No | 4 | Counterbored | M3 | 00000000 | 00000 |