About Hinges
More
About Rod Ends
More
Surface-Mount Hinges with Holes
Hinges with a nonremovable pin deter tampering.
Zinc hinges have better corrosion resistance than galvanized low-carbon steel.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | Nonremovable Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size  | Each | |
Black Powder-Coated Zinc | |||||||||||||
| 1 9/16" | 25/32" | 1 9/16" | 25/32" | 1 9/16" | 0.200" | 180° | 3/16" | 300 Series Stainless Steel | No | 4 | No. 10 | 0000000 | 000000 |
Chrome-Plated Zinc—Dull | |||||||||||||
| 1 9/16" | 25/32" | 1 9/16" | 25/32" | 1 9/16" | 0.200" | 180° | 3/16" | 300 Series Stainless Steel | No | 4 | No. 10 | 0000000 | 00000 |
Mortise-Mount Hinges with Holes
Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame. Hinges with a nonremovable pin deter tampering.
Zinc-plated low-carbon steel hinges have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | |
Nonremovable Pin | ||||||||||||||
For Wood Doors | ||||||||||||||
Low-Carbon Steel—Dull | ||||||||||||||
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 00000 |
Zinc-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
Removable Pin | ||||||||||||||
For Wood Doors | ||||||||||||||
Low-Carbon Steel—Dull | ||||||||||||||
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
Zinc-Plated Low-Carbon Steel—Dull | ||||||||||||||
| 2" | 25/32" | 2" | 25/32" | 1 9/16" | 0.050" | 270° | 1/8" | Steel | No | 4 | Countersunk | No. 6 | 0000000 | 0000 |
Metal-Detectable Hinges with Holes
Made of plastic with a metal additive, these hinges will set off metal detectors if a piece breaks off and falls into your line. The blue color makes broken pieces easy to find and retrieve. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs to keep contaminated food from leaving your facility.
These hinges are nylon, so they move smoothly and silently. They don’t wear easily, and they won’t break down from oil, grease, and solvents. They’re also FDA compliant, so they’re safe for direct contact with food. To limit unwanted adjustments, these hinges have nonremovable pins.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Max. Temp., °F | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Color | Specifications Met | Each | |
Nylon Plastic | ||||||||||||||||
| 1 9/16" | 9/16" | 1 9/16" | 9/16" | 1 9/16" | 7/32" | 270° | 5/32" | 303 Stainless Steel | 175° | No | 4 | M5.5 | Blue | FDA Compliant 21 CFR 177.1500 FDA Compliant 21 CFR 178.3297 | 0000000 | 00000 |
Hinges without Holes
These hinges are made of metal. Hinges with a nonremovable pin deter tampering.
For technical drawings and 3-D models, click on a part number.
Friction Hinges
Constant resistance through the full range of motion holds lids, panels, and doors at any angle. All hinges have a nonremoveable pin to deter tampering.
Aluminum hinges are about half the weight of zinc. They also have mild corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Torque, in.-lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | ||
Black Painted Aluminum | ||||||||||||||||
| 1 | 1 1/2" | 25/32" | 1 1/2" | 25/32" | 1 9/16" | 0.125" | 270° | 8 | 13/32" | Steel | No | 4 | Straight | No. 8 | 0000000 | 000000 |
| 1 | 1 1/2" | 25/32" | 1 1/2" | 25/32" | 1 9/16" | 0.125" | 270° | 15 | 13/32" | Steel | No | 4 | Straight | No. 8 | 0000000 | 00000 |
| 1 | 1 1/2" | 25/32" | 1 1/2" | 25/32" | 1 9/16" | 0.125" | 270° | 20 | 13/32" | Steel | No | 4 | Straight | No. 8 | 0000000 | 00000 |
Glass Cabinet Pivot Hinges
Slip the hinge pins into 11/32" Dia. × 5/16" Dp. holes in a cabinet to create free-swinging glass doors. All of these hinges have a nonremovable pin to deter tampering. A pair is for one door and includes one top and one bottom hinge for mounting to the top and bottom of the door.
Brass- and chrome-plated steel have more corrosion resistance than painted steel.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Dia. | Dp. | Mounting Fasteners Included | Pair | |
Chrome-Plated Steel—Polished | ||||||||||||
| 1/4" | 1/2" | 1 11/32" | 1 9/16" | 0.080" | 110° | 13/64" | Steel | 11/32" | 5/16" | Yes | 00000000 | 00000 |
Black Painted Steel | ||||||||||||
| 1/4" | 25/32" | 1 3/16" | 1 9/16" | 0.080" | 110° | 13/64" | Steel | 11/32" | 5/16" | Yes | 00000000 | 0000 |
Corrosion-Resistant Fully Threaded Rod End Bolts
These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. Black-oxide 303 stainless steel rod end bolts have a matte-black finish that adds some corrosion resistance but is mostly chosen for its looks.
316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.
ASTM rod end bolts meet a standard for material.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Fastener Strength Grade/Class | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
303 Stainless Steel | ||||||||||
| 3/4"-16 | 3/4" | 1 9/16" | 5" | 4 1/8" | 3/4" | 90,000 | ASTM A582 | __ | 00000000 | 000000 |
Black-Oxide 303 Stainless Steel | ||||||||||
| 3/4"-10 | 3/4" | 1 9/16" | 5" | 4 1/8" | 3/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 90,000 | ASTM A582 | __ | 00000000 | 00000 |
304 Stainless Steel | ||||||||||
| 3/4"-10 | 3/4" | 1 9/16" | 3 1/2" | 2 5/8" | 3/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 5" | 4 1/8" | 3/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
| 3/4"-16 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 75,000 | ASTM A193 | ASTM Grade B8 | 0000000 | 00000 |
316 Stainless Steel | ||||||||||
| 3/4"-10 | 3/4" | 1 9/16" | 3 1/2" | 2 5/8" | 3/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 5" | 4 1/8" | 3/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 75,000 | ASTM A276 | __ | 00000000 | 00000 |
Fully Threaded Rod End Bolts
For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 3/4"-10 | 3/4" | 1 9/16" | 3 1/2" | 2 5/8" | 3/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 000000 |
| 3/4"-10 | 3/4" | 1 9/16" | 5" | 4 1/8" | 3/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 00000 |
| 3/4"-16 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 00000 |
High-Strength Fully Threaded Rod End Bolts
These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer. For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Fastener Strength Grade/Class | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4"-10 | 3/4" | 1 9/16" | 3 1/2" | 2 5/8" | 3/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 000000 |
| 3/4"-10 | 3/4" | 1 9/16" | 5" | 4 1/8" | 3/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
| 3/4"-10 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
| 3/4"-16 | 3/4" | 1 9/16" | 6" | 5 1/8" | 3/4" | 125,000 | ASTM Grade B7 | ASTM A193 | Black-Oxide Alloy Steel | 0000000 | 00000 |
Easy-Adapt Clevis Rod Ends
Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Each | |
Zinc-Plated Carbon Steel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/4"-10 | 3/4" | 3/4" | 1 9/16" | 3 1/8" | 1 9/16" | 1 9/16" | 60,000 | Clevis Pin, Two Safety Clips | Right Hand | 0000000 | 000000 |
| 3/4"-16 | 3/4" | 3/4" | 1 9/16" | 3 1/8" | 1 9/16" | 1 9/16" | 60,000 | Clevis Pin, Two Safety Clips | Right Hand | 0000000 | 00000 |