About Rod Ends
More
Internally Threaded Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Shank Thread Direction | Each | |
| M8 × 1.25 mm | 8mm | 12.5° | 24mm | 9mm | 36mm | 16mm | 110 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 000000 |
Chemical-Resistant Ball Joint Rod Ends
Made of impact-resistant nylon, these rod ends withstand corrosion as well as fuels, lyes, and weak acids. They are also 80% lighter than steel rod ends. A self-lubricating nylon ball provides maximum abrasion resistance and eliminates the need for lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Shank Thread Direction | Each | |
| M8 × 1.25 mm | 8mm | 12.5° | 24mm | 12mm | 42mm | 25mm | 40 | -20° to 175° | Nylon Plastic | ISO 12240-4 | Right Hand | 00000000 | 000000 |
High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Rod ends are made of cadmium- or zinc-plated steel, which both offer moderate corrosion resistance. Seals keep lubricant in and dirt out.
Zinc-plated steel rod ends meet DIN dimensional standards. They come lubricated, so you won’t need to lubricate them at installation. They will require ongoing lubrication.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Zinc-Plated Carbon Steel | |||||||||||
| M8 | 8mm | 8.5° | 24mm | 12mm | 42mm | 25mm | 220 | DIN 648 | Right Hand | 00000000 | 000000 |
Internally Threaded Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
Static Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Specifications Met | Material | Choose a Shank Thread Direction | Each | |
| M8 × 1.25 mm | 8mm | 36° | 24mm | 12mm | 36mm | 17mm | 1,900 | 770 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | 0000000 | 000000 | |
Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
Static Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Specifications Met | Material | Choose a Shank Thread Direction | Each | |
| M8 × 1.25 mm | 8mm | 36° | 24mm | 12mm | 42mm | 25mm | 1,900 | 770 | -40° to 175° | DIN 648 | Zinc-Plated Carbon Steel | 0000000 | 000000 | |
Corrosion-Resistant Fully Threaded Rod End Bolts
These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
303 and 304 stainless steel rod end bolts won't rust in humid, wet, and washdown environments. They're stronger than brass bolts and nearly as strong as steel. They will rust when exposed to salt water and chemicals, however. 316 stainless steel rod end bolts are our most corrosion resistant, and they're nearly as strong as steel rod end bolts. Use them in areas with salt water, chlorine, and chemicals without worrying about rust.
DIN 444 rod end bolts meet an international standard for rod end dimensions.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Each | |
Right-Hand Threaded Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
304 Stainless Steel | |||||||||
| M12 × 1.75 mm | 12mm | 24mm | 60mm | 46mm | 14mm | 70,000 | DIN 444 | 00000000 | 000000 |
| M12 × 1.75 mm | 12mm | 24mm | 70mm | 56mm | 14mm | 70,000 | DIN 444 | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 24mm | 90mm | 76mm | 14mm | 70,000 | DIN 444 | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 24mm | 100mm | 86mm | 14mm | 70,000 | DIN 444 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| M12 × 1.75 mm | 12mm | 24mm | 70mm | 56mm | 14mm | 75,000 | DIN 444 | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 24mm | 80mm | 66mm | 14mm | 75,000 | DIN 444 | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 24mm | 90mm | 76mm | 14mm | 75,000 | DIN 444 | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 24mm | 100mm | 86mm | 14mm | 75,000 | DIN 444 | 00000000 | 00000 |
| M12 × 1.75 mm | 12mm | 24mm | 120mm | 106mm | 14mm | 75,000 | DIN 444 | 00000000 | 00000 |
Chemical-Resistant Clevis Rod Ends
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Temp. Range, °F | Includes | Shank Thread Direction | Specifications Met | Each | |
Nylon Plastic | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M12 × 1.75 mm | 12mm | 12mm | 24mm | 48mm | 18mm | 24mm | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 000000 |
Easy-Adapt Clevis Rod Ends
Make quick adjustments to these rod ends by inserting and releasing the clevis pins without the need to bend them into place. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies. All are zinc-plated steel for moderate corrosion resistance.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Includes | Shank Thread Direction | Specifications Met | Each | |
Zinc-Plated Carbon Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M12 × 1.25 mm | 12mm | 12mm | 24mm | 48mm | 24mm | 24mm | 60,000 | Snap-On Spring Clevis Pin | Right Hand | DIN 71752 | 0000000 | 000000 |
| M12 × 1.75 mm | 12mm | 12mm | 24mm | 48mm | 24mm | 24mm | 60,000 | Snap-On Spring Clevis Pin | Right Hand | DIN 71752 | 0000000 | 00000 |
| M12 × 1.75 mm | 12mm | 12mm | 24mm | 72mm | 24mm | 48mm | 60,000 | Snap-On Spring Clevis Pin | Right Hand | DIN 71752 | 0000000 | 00000 |