Filter by
System of Measurement
Overall Width
Mounting Holes
Hinge Type
Pin Material
Weight Capacity
Export Control Classification Number (ECCN)
DFARS Specialty Metals
About Hinges
%20--%3e%3csvg%20version='1.1'%20id='Layer_1'%20xmlns='http://www.w3.org/2000/svg'%20xmlns:xlink='http://www.w3.org/1999/xlink'%20x='0px'%20y='0px'%20viewBox='0%200%20400%20400'%20style='enable-background:new%200%200%20400%20400;'%20xml:space='preserve'%3e%3cstyle%20type='text/css'%3e%20.st0{fill:%231A70A0;}%20.st1{opacity:0.5;}%20%3c/style%3e%3cg%3e%3cg%3e%3cpath%20class='st0'%20d='M200,56.9c38.35,0,74.4,14.93,101.51,42.05c27.11,27.11,42.05,63.17,42.05,101.51s-14.93,74.4-42.05,101.51%20S238.35,344.02,200,344.02s-74.4-14.93-101.51-42.05c-27.11-27.11-42.05-63.17-42.05-101.51s14.93-74.4,42.05-101.51%20S161.65,56.9,200,56.9%20M200,12.9C96.41,12.9,12.44,96.88,12.44,200.46c0,103.59,83.97,187.56,187.56,187.56%20c103.59,0,187.56-83.97,187.56-187.56C387.56,96.88,303.59,12.9,200,12.9L200,12.9z'/%3e%3c/g%3e%3cg%3e%3cg%20class='st1'%3e%3cpath%20class='st0'%20d='M235.49,152.24h16.15l-27.46,111.87c-1.94,7.8-2.91,12.5-2.91,14.1c0,1.82,0.58,3.29,1.73,4.41%20c1.16,1.12,2.69,1.68,4.61,1.68c5.23,0,11.78-3.85,19.63-11.55l17.22,21.34c-16.95,17.33-34.87,26-53.78,26%20c-8.37,0-15.45-1.47-21.23-4.41c-5.79-2.94-10.44-7.25-13.95-12.92c-3.51-5.67-5.27-11.18-5.27-16.53c0-1.93,0.35-5.24,1.05-9.94%20c1-6.94,2.05-12.54,3.15-16.82l15.22-62.15h-32.69l7.65-30.97C190.89,163.58,214.53,158.88,235.49,152.24z%20M230.44,80.84%20c8.24,0,14.66,2.62,19.26,7.86c4.6,5.24,6.9,11.55,6.9,18.94c0,5.46-1.42,10.7-4.25,15.73c-2.83,5.03-6.88,9.07-12.12,12.12%20c-5.24,3.05-10.33,4.57-15.24,4.57c-4.6,0-9.17-1.23-13.72-3.69c-4.55-2.46-8.02-5.78-10.43-9.95%20c-2.41-4.17-3.61-8.67-3.61-13.48c0-5.35,1.52-10.64,4.57-15.89c3.05-5.24,7.03-9.25,11.96-12.04%20C218.68,82.23,224.24,80.84,230.44,80.84z'/%3e%3c/g%3e%3cg%3e%3cpath%20class='st0'%20d='M214.08,152.24h16.15l-27.46,111.87c-1.94,7.8-2.91,12.5-2.91,14.1c0,1.82,0.58,3.29,1.73,4.41%20c1.16,1.12,2.69,1.68,4.61,1.68c5.23,0,11.78-3.85,19.63-11.55l17.22,21.34c-16.95,17.33-34.87,26-53.78,26%20c-8.37,0-15.45-1.47-21.23-4.41c-5.79-2.94-10.44-7.25-13.95-12.92c-3.51-5.67-5.27-11.18-5.27-16.53c0-1.93,0.35-5.24,1.05-9.94%20c1-6.94,2.05-12.54,3.15-16.82l15.22-62.15h-32.69l7.65-30.97C169.48,163.58,193.11,158.88,214.08,152.24z%20M209.03,80.84%20c8.24,0,14.66,2.62,19.26,7.86c4.6,5.24,6.9,11.55,6.9,18.94c0,5.46-1.42,10.7-4.25,15.73c-2.83,5.03-6.88,9.07-12.12,12.12%20c-5.24,3.05-10.33,4.57-15.24,4.57c-4.6,0-9.17-1.23-13.72-3.69c-4.55-2.46-8.02-5.78-10.43-9.95%20c-2.41-4.17-3.61-8.67-3.61-13.48c0-5.35,1.52-10.64,4.57-15.89c3.05-5.24,7.03-9.25,11.96-12.04%20C197.26,82.23,202.83,80.84,209.03,80.84z'/%3e%3c/g%3e%3c/g%3e%3c/g%3e%3c/svg%3e){kind=small}
Choose the right hinge based on mounting style, clearance, leaf thickness, knuckle length, and other important dimensions.
Surface-Mount Hinges without Holes
 |
Removable Pin | Nonremovable Pin | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Each | Each | |||||||||||||
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Leaf Thk. | Range of Motion | Pin Material | Appearance | 1-9 | 10-Up | 1-9 | 10-Up | ||||
Galvanized Steel | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.165" | 265° | Brass | Dull | ——— | 0 | 0 | 1623A14 | 000000 | 000000 | ||
Low-Carbon Steel | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.150" | 265° | Steel | Dull | 16175A74 | 00000 | 00000 | ——— | 0 | 0 | ||
| 4" | 1 3/4" | 4" | 1 3/4" | 3 1/2" | 0.165" | 265° | Steel | Dull | 16175A75 | 00000 | 00000 | 16175A33 | 00000 | 0000 | ||
304 Stainless Steel | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.090" | 265° | 304 Stainless Steel | Dull | 1624A16 | 00000 | 0000 | 1624A77 | 00000 | 0000 | ||
| 4" | 1 3/4" | 4" | 1 3/4" | 3 1/2" | 0.075" | 265° | 304 Stainless Steel | Dull | ——— | 0 | 0 | 1624A94 | 00000 | 00000 | ||
| 4" | 1 3/4" | 4" | 1 3/4" | 3 1/2" | 0.090" | 265° | 304 Stainless Steel | Dull | ——— | 0 | 0 | 1624A95 | 00000 | 00000 | ||
316 Stainless Steel | ||||||||||||||||
| 4" | 1 3/4" | 4" | 1 3/4" | 3 1/2" | 0.075" | 265° | 316 Stainless Steel | Dull | ——— | 0 | 0 | 15095A38 | 00000 | 00000 | ||
Aluminum | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 0.090" | 265° | 5052 Aluminum | Dull | ——— | 0 | 0 | 1609A27 | 00000 | 0000 | ||
| 4" | 1 3/4" | 4" | 1 3/4" | 3 1/2" | 0.075" | 265° | 5052 Aluminum | Dull | ——— | 0 | 0 | 1609A52 | 00000 | 0000 | ||
Entry Door Template Hinges
 |
No need to measure or drill new holes—these hinges will match your existing door and frame. Their screw holes are in a standardized, half-moon pattern that’s identical across manufacturers. Fit the hinge leaves into a cutout (mortise) for flush mounting.
Removable Pin—For doors you need to remove occasionally to make adjustments or access equipment.
Primed Steel—Get a head start on painting with hinges that have primer already applied.
Brass-Plated Steel—Get the look of brass without sacrificing strength.
Bronze-Plated Steel—Combine the corrosion resistance and look of bronze with the strength of steel.
Chrome-Plated Steel—A shiny finish adds corrosion resistance, though it may chip with heavy use.
304 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
Door Leaf | Frame Leaf | Mounting Holes | Removable Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Wt. Cap., lb. | Range of Motion | Daily Openings | Pin Material | No. of | Fasteners Included | Specs. Met | Each | |||
Primed Steel | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 45 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1494A11 | 00000 | ||
Brass-Plated Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 45 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1494A61 | 0000 | ||
Brass-Plated Steel—Polished | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 45 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1494A72 | 00000 | ||
Bronze-Plated Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 45 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1494A21 | 0000 | ||
Chrome-Plated Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 45 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1494A52 | 0000 | ||
304 Stainless Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 45 | 180° | 205 | 304 Stainless Steel | 6 | Yes | ANSI/BHMA A156.7 | 1781A42 | 00000 | ||
Entry Door Template Spring Hinges
 |
Square-Corner Hinge |
 |
Round Corner |
 |
Replacement Tension Pins |
The hole pattern will match your door and the spring will swing it closed behind you. No need to measure and drill holes, these hinges have a standard half-moon pattern that’s identical across manufacturers. Fit the leaves into cutouts (mortises) to mount them flush with door and frame edges.
Self-Close—These hinges automatically swing doors closed.
Adjustable Closing Tension—Fine-tune the hinge's tension to account for weight, wind, or pressure. Adjust using the included tool.
Primed Steel—Get a head start on painting with hinges that have primer already applied.
Black Painted Steel—The dark finish blends in or stands out.
Brass-Plated Steel—Get the look of brass without sacrificing strength.
Chrome-Plated Steel—A shiny finish adds corrosion resistance, though it may chip with heavy use.
Zinc-Plated Steel—A common choice for areas exposed to occasional moisture.
304 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
Weight Capacity—For hinges with a capacity of 90, 110, and 150 lbs., capacity is based on three hinges per door with a maximum door size of 7' Ht. × 3' Wd.
Hinges | Replacement Tension Pins | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Mounting Holes | Square Corner | Round Corner | ||||||||||||||||
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Range of Motion | Pin Material | Wt. Cap., lb. | No. of | Fasteners Included | Fire Safety Std. | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | Each | |||||
Self-Close—Adjustable Closing Tension | ||||||||||||||||||||
Primed Steel | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | — | ——— | 0 | 1 | 8401A132 | 000000 | 1479A202 | 00000 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | — | ——— | 0 | 1 | 1479A133 | 00000 | 1479A202 | 0000 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 110 | 6 | Yes | UL 10C | 2 | 8401A81 | 000000 | — | ——— | 0 | 1479A201 | 0000 | ||
Black Painted Steel | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | 1 | 6338N121 | 00000 | — | ——— | 0 | 1479A202 | 0000 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 110 | 6 | Yes | UL 10C | — | ——— | 0 | 2 | 1479A148 | 00000 | 1479A201 | 0000 | ||
Zinc-Plated Steel—Dull | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | 1 | 6338N125 | 00000 | 1 | 1479A134 | 00000 | 1479A202 | 0000 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 8 | Yes | UL 10C | — | ——— | 0 | 1 | 6338N115 | 00000 | 1479A202 | 0000 | ||
Brass-Plated Steel—Polished | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 110 | 6 | Yes | UL 10C | 2 | 8401A83 | 00000 | — | ——— | 0 | 1479A201 | 0000 | ||
Brass-Plated Steel—Dull | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | — | ——— | 0 | 1 | 8401A161 | 00000 | 1479A202 | 0000 | ||
Chrome-Plated Steel—Dull | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | — | ——— | 0 | 1 | 8401A136 | 00000 | 1479A202 | 0000 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | UL 10C | — | ——— | 0 | 1 | 1479A182 | 00000 | 1479A202 | 0000 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | Steel | 110 | 6 | Yes | UL 10C | 2 | 8401A82 | 00000 | — | ——— | 0 | 1479A201 | 0000 | ||
304 Stainless Steel—Dull | ||||||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 180° | 304 Stainless Steel | 90 | 6 | Yes | UL 10C | 1 | 8401A173 | 00000 | 1 | 8401A165 | 00000 | 1479A203 | 0000 | ||
Piano Hinges without Holes
 |
Our most versatile piano hinges, weld them into place or drill your own holes. They run the length of doors, panels, and lids for even weight distribution and stable support. All are manufactured in the U.S. or Canada, so they meet strict quality standards for reliable performance.
Low-Carbon Steel—Dull
Knuckle | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Wd. | Pin Dia. | Range of Motion | Pin Material | Dia. | Lg. | Wt. Cap. | 1 ft. Long | 2 ft. Long | 3 ft. Long | 4 ft. Long | 5 ft. Long | 6 ft. Long | 7 ft. Long | 8 ft. Long | |||
0.072" Thick Leaf | |||||||||||||||||
| 3 1/2" | 1/4" | 270° | Steel | 0.394" | 1" | Not Rated | 15665A507 | 00000 | 00000 | 000000 | 000000 | 000000 | 000000 | 000000 | 000000 | ||
0.120" Thick Leaf | |||||||||||||||||
| 3 1/2" | 3/8" | 270° | Steel | 0.615" | 2" | Not Rated | 15665A608 | 00000 | 00000 | 00000 | 00000 | 00000 | 00000 | 00000 | 00000 | ||
Surface-Mount Lift-Off Hinges
 |
Style 2 with Mounting Holes |
 |  |
Left-Side Door Mount | Right-Side Door Mount |
The pin is attached to the frame leaf, so you can take off doors without removing the screws or pin from the hinge. Surface-mount hinges are the standard for most enclosure doors, panels, and lids. Since they don’t need a cutout, they’re easier to install than mortise hinges but won’t sit flush with the edge of your door.
To install hinges without mounting holes, weld into place or drill your own holes.
316 Stainless Steel—Our most corrosion-resistant stainless steel hinges won't degrade when exposed to harsh weather, salt water, and most chemicals.
Door Mounting Location—To choose a door mounting location, stand on the pull side of the door. Use a right-side hinge if the hinge is on the right, or a left-side hinge if it’s on the left.
Entry Door Nonstandard Hole Pattern Hinges
 |  |
Square Corner | Round Corner |
Commonly installed on interior and exterior wood doors, these hinges have a different hole pattern than standard hinges. They also let you work around worn mounting holes when replacing hinges with the standard half-moon pattern. The leaves fit into cutouts (mortises) to mount hinges flush with door and frame edges. Also known as nontemplate hinges.
Removable Pin—For doors you need to remove occasionally to make adjustments or access equipment.
Nonremovable Pin—The tamper-resistant choice. Since the pin can’t be removed, the door can only be taken down by removing the hinge completely.
Steel—Best for dry environments since moisture will cause these hinges to rust.
Primed Steel—Get a head start on painting with hinges that have primer already applied.
Zinc-Plated Steel—A common choice for areas exposed to occasional moisture.
304 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
Door Leaf | Frame Leaf | Mounting Holes | Removable Pin | Nonremovable Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Wt. Cap. | Range of Motion | Corner Shape | Pin Material | No. of | Fasteners Included | Each | Each | ||||
Steel—Dull | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | Not Rated | 270° | Square | Steel | 6 | No | 1513A15 | 00000 | 1514A28 | 00000 | ||
Primed Steel | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | Not Rated | 270° | Round | Steel | 6 | No | 1513A51 | 0000 | ——— | 0 | ||
Zinc-Plated Steel—Dull | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | Not Rated | 270° | Square | Steel | 6 | No | 1513A61 | 0000 | ——— | 0 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | Not Rated | 270° | Round | Steel | 6 | No | 1513A28 | 0000 | ——— | 0 | ||
304 Stainless Steel—Dull | ||||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | Not Rated | 270° | Square | 304 Stainless Steel | 6 | No | 1513A38 | 00000 | ——— | 0 | ||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | Not Rated | 270° | Round | 304 Stainless Steel | 6 | No | 1513A58 | 00000 | ——— | 0 | ||
Entry Door Template Hinges with Bearings
 |
Bearings inside these hinges reduce friction, making doors easy to open and close. The bearings also extend the life of the hinges, so they’re good for high-traffic entrances. Hinges have a standardized half-moon pattern to match your existing door and frame. Fit the leaves into cutouts (mortises) for flush mounting. These hinges work with or without a door closer.
Removable Pin—For doors you need to remove occasionally to make adjustments or access equipment.
Primed Steel—Get a head start on painting with hinges that have primer already applied.
Brass-Plated Steel—Get the look of brass without sacrificing strength.
Bronze-Plated Steel—Combine the corrosion resistance and look of bronze with the strength of steel.
Chrome-Plated Steel—A shiny finish adds corrosion resistance, though it may chip with heavy use.
305 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
Door Leaf | Frame Leaf | Mounting Holes | Removable Pin | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Wt. Cap., lb. | Range of Motion | Daily Openings | Pin Material | No. of | Fasteners Included | Specs. Met | Each | |||
Primed Steel | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1502A11 | 000000 | ||
Brass-Plated Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1502A81 | 00000 | ||
Brass-Plated Steel—Polished | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1502A31 | 00000 | ||
Bronze-Plated Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1502A21 | 00000 | ||
Chrome-Plated Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | 205 | Steel | 6 | Yes | ANSI/BHMA A156.7 | 1502A51 | 00000 | ||
305 Stainless Steel—Dull | |||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | 205 | 305 Stainless Steel | 6 | Yes | ANSI/BHMA A156.7 | 1499A11 | 00000 | ||
Maintenance-Free Entry Door Template Hinges with Bearings
 |
Keep busy doors swinging smoothly and quietly without the mess of oiling them. These hinges have enclosed self-lubricating bearings for reduced friction and long life. Their screw holes are in a standardized half-moon pattern to match your existing door and frame. Fit the hinge leaves into cutouts (mortises) for flush mounting. These hinges work with or without a door closer.
Removable Pin—For doors you need to remove occasionally to make adjustments or access equipment.
Primed Steel—Get a head start on painting with hinges that have primer already applied.
Brass-Plated Steel—Get the look of brass without sacrificing strength.
Bronze-Plated Steel—Combine the corrosion resistance and look of bronze with the strength of steel.
Chrome-Plated Steel—A shiny finish adds corrosion resistance, though it may chip with heavy use.
Door Leaf | Frame Leaf | Mounting Holes | Removable Pin | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Wt. Cap., lb. | Range of Motion | Pin Material | No. of | Fasteners Included | Specs. Met | Each | |||
Primed Steel | ||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | Steel | 6 | Yes | ANSI/BHMA A156.7 | 16745A22 | 000000 | ||
Brass-Plated Steel—Dull | ||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | Steel | 6 | Yes | ANSI/BHMA A156.7 | 16745A61 | 00000 | ||
Brass-Plated Steel—Polished | ||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | Steel | 6 | Yes | ANSI/BHMA A156.7 | 16745A44 | 00000 | ||
Bronze-Plated Steel—Dull | ||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | Steel | 6 | Yes | ANSI/BHMA A156.7 | 16745A37 | 00000 | ||
Chrome-Plated Steel—Dull | ||||||||||||||
| 3 1/2" | 1 3/4" | 3 1/2" | 1 3/4" | 3 1/2" | 100 | 180° | Steel | 6 | Yes | ANSI/BHMA A156.7 | 16745A29 | 00000 | ||
Plastic Piano Hinges without Holes
Entry Door Nonstandard Hole Pattern Spring Hinges
 |  |
With Square Corners | Round Corner |
Work around worn-out holes with hinges that have a different pattern than the standard half-moon. A spring inside these hinges swings doors closed behind you. Fit the leaves into cutouts (mortises) to mount hinges flush with door and frame edges.
Self-Close—These hinges automatically swing doors closed.
Adjustable Closing Tension—Fine-tune the hinge's tension to account for weight, wind, or pressure. Adjust using the included tool.
Primed Steel—Get a head start on painting with hinges that have primer already applied.
Black Painted Steel—The dark finish blends in or stands out.
Brass-Plated Steel—Get the look of brass without sacrificing strength.
Chrome-Plated Steel—A shiny finish adds corrosion resistance, though it may chip with heavy use.
Weight Capacity—For hinges with a capacity of 90 lbs., capacity is based on three hinges per door with a maximum door size of 7' Ht. × 3' Wd.
Door Leaf | Frame Leaf | Mounting Holes | Square Corner | Round Corner | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Overall Wd. | Range of Motion | Pin Material | Wt. Cap., lb. | No. of | Fasteners Included | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||||
Self-Close—Adjustable Closing Tension | |||||||||||||||||
Primed Steel | |||||||||||||||||
| 3 1/2" | 1 11/16" | 3 1/2" | 1 11/16" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | 2 | 1479A665 | 000000 | — | ——— | 0 | ||
Black Painted Steel | |||||||||||||||||
| 3 1/2" | 1 11/16" | 3 1/2" | 1 11/16" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | 2 | 1479A664 | 00000 | 2 | 1479A674 | 000000 | ||
Brass-Plated Steel—Dull | |||||||||||||||||
| 3 1/2" | 1 11/16" | 3 1/2" | 1 11/16" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | — | ——— | 0 | 2 | 1479A678 | 00000 | ||
Chrome-Plated Steel—Dull | |||||||||||||||||
| 3 1/2" | 1 11/16" | 3 1/2" | 1 11/16" | 3 1/2" | 180° | Steel | 90 | 6 | Yes | 2 | 1479A667 | 00000 | 2 | 1479A676 | 00000 | ||
Heavy Duty Fold-Away Shelf Brackets
 |  |
Style C | Shown Folded |
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Dp. | Ht. | Wd. | Projection | Wt. Cap., lb. | Mounting Fasteners Included | Screw Size | Each | |||
Style C—Galvanized Steel | ||||||||||
| 15" | 8 1/4" | 3 1/2" | 4 1/2" | 550 | No | 3/8" | 47025T25 | 0000000 | ||
Plastic Hinges with Holes
 |
Moisture and chemical resistant, these hinges hold up where metal hinges could break down. You'll often find them on enclosures, cabinets, and other equipment.
Pinless—With a flexible joint instead of a pin, these hinges are free of gaps or grooves that can trap dirt and debris. They also eliminate lubricants and metal-to-metal contact for use where contamination is a concern, such as mixing containers.
Polyolefin—These hinges withstand fatigue from frequent opening and closing. They also resist mild chemicals, oil, and UV light.
Ball Joint Rod Ends
 |  |
Shank | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Ctr. Lg. | Thread Lg. | ID | Max. Ball Swivel | Overall Wd. | Overall Thk. | Static Radial Load Cap., lb. | Material | Choose a Shank Thread Direction | Each | |||
Ball Joints | |||||||||||||
| 1 1/2"-12 | 5 3/8" | 3" | 1 1/2" | 6.5° | 3 1/2" | 1 5/16" | 64,750 | Zinc-Plated Alloy Steel | Right Hand, Left Hand | 60645K66 | 0000000 | ||
Internally Threaded Ball Joint Rod Ends
 |  |
Shank | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Ctr. Lg. | Thread Lg. | ID | Max. Ball Swivel | Overall Wd. | Overall Thk. | Static Radial Load Cap., lb. | Material | Choose a Shank Thread Direction | Each | |||
Ball Joints | |||||||||||||
| 1 1/2"-12 | 5 3/8" | 2 5/8" | 1 1/2" | 6.5° | 3 1/2" | 1 5/16" | 64,750 | Zinc-Plated Alloy Steel | Right Hand, Left Hand | 60645K76 | 0000000 | ||
