About Hinges
More
Lift-Off Hinges without Holes
The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Capacity is based on two hinges per door. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
The pin on hinges for left- or right-side mounting is permanently attached.
304 stainless steel hinges are more corrosion resistant than zinc-plated low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Material | Pin Material | Each | ||
Left Side Door Mounting Location | |||||||||||||
304 Stainless Steel—Dull | |||||||||||||
2 | 1 15/16" | 2 5/32" | 1 15/16" | 2 5/32" | 4 5/16" | 0.118" | 360° | 85 | 15/32" | 304 Stainless Steel | 304 Stainless Steel | 000000000 | 000000 |
2 | 2 15/16" | 2 5/32" | 2 15/16" | 2 5/32" | 4 5/16" | 0.156" | 360° | 195 | 15/32" | 304 Stainless Steel | 304 Stainless Steel | 000000000 | 00000 |
Right Side Door Mounting Location | |||||||||||||
304 Stainless Steel—Dull | |||||||||||||
2 | 1 15/16" | 2 5/32" | 1 15/16" | 2 5/32" | 4 5/16" | 0.118" | 360° | 85 | 15/32" | 304 Stainless Steel | 304 Stainless Steel | 000000000 | 00000 |
2 | 2 15/16" | 2 5/32" | 2 15/16" | 2 5/32" | 4 5/16" | 0.156" | 360° | 195 | 15/32" | 304 Stainless Steel | 304 Stainless Steel | 000000000 | 00000 |
Hold-Closed Half-Mortise Concealed Cabinet Hinges
Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch. Also known as European hinges, only one cutout (mortise) is needed for these hinges—mount the frame leaf to the inside cabinet wall and mount the door leaf into a recessed cutout (mortise) on the inside of the cabinet door. Once mounted, the hinges will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Hinges for inset doors are for doors that are flush with their frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
For Cutout | Door Leaf | Frame Leaf | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dp. | Dia. | Ht. | Wd. | Ht. | Wd. | For Door Thick. | O'all Wd. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Each | |
For Inset Door—Hold Closed, Self Closing | |||||||||||||||
Steel—Polished | |||||||||||||||
7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 1 7/8" | 2 11/16" | 19/32" to 55/64" | 4 5/16" | 90° | 5 1/2 | Steel | Yes | 4 | Countersunk | 00000000 | 00000 |
Soft-Close Half-Mortise Concealed Cabinet Hinges
Eliminate slamming doors—push the door and these hinges slowly pull it closed. Also known as European hinges, only one cutout (mortise) is needed for these hinges—mount the frame leaf to the inside cabinet wall and mount the door leaf into a recessed cutout (mortise) on the inside of the cabinet door. Once mounted, the hinges will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Hinges for overlay doors are for doors that cover their frame.
Hinges for half overlay doors are for doors that cover half of their frame.
For technical drawings and 3-D models, click on a part number.
For Cutout | Door Leaf | Frame Leaf | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dp. | Dia. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Each | |
For Overlay Door—Soft Closing | ||||||||||||||
Nickel-Plated Steel—Dull | ||||||||||||||
7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 1 7/8" | 2 1/2" | 4 5/16" | 105° | 5 1/2 | Steel | Yes | 4 | Countersunk | 00000000 | 00000 |
For Half Overlay Door—Soft Closing | ||||||||||||||
Nickel-Plated Steel—Dull | ||||||||||||||
7/16" | 1 3/8" | 2 1/4" | 1 1/2" | 1 7/8" | 2 1/2" | 4 5/16" | 105° | 5 1/2 | Steel | Yes | 4 | Countersunk | 00000000 | 0000 |