Soft-Opening Lid Supports
Gradually slow your lid's motion to prevent it from slamming open. To open lids, lower them and the support will slowly and softly do the rest. Manually shut the lids and the supports will hold them in the closed position. Designed for use on lids that open down from the side, these supports allow lids to double as a work surface when they are open, similar to a drop-leaf desk. They can be used individually but should be used in pairs for lids longer than 24". Mounting position is determined as you look into your cabinet or chest. Reversible supports are for right-side or left-side mounting positions.
All of these supports are rated for torque instead of maximum lid weight. Calculate your lid's torque and make sure it falls within the range listed—too much torque will cause your lid to slam; too little will prevent it from closing. Torque = Lid Height (inches) × 0.5 × Lid Weight (lbs.). An adjustment screw allows you to control the opening speed.
For technical drawings and 3-D models, click on a part number.
Min. Mounting | Torque Range, in.-lbs. | Mounting | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dp. (A) | Clearance (B) | Lid Mounting Clearance (C) | For Lid Opening Angle | One Lid Support | Two Lid Supports | Material | Appearance | Mounting Position | Hold Lid Closed | Hardware Included | Screw Size | No. of Holes | Each | |
Side Mount, Opens Down | ||||||||||||||
2.84" | 8.31" | 4.46" | 90° | 19 to 60 | 38 to 120 | Nickel-Plated Steel | Dull | Left Side | Yes | Yes | No. 6 | 6 | 0000000 | 000000 |
2.84" | 8.31" | 4.46" | 90° | 19 to 60 | 38 to 120 | Nickel-Plated Steel | Dull | Right Side | Yes | Yes | No. 6 | 6 | 0000000 | 00000 |
3.32" | 8.86" | 4.85" | 90° | 30 to 43 | 60 to 86 | Nickel-Plated Steel | Dull | Reversible | Yes | Yes | No. 6 | 6 | 0000000 | 00000 |