Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

These hinges are made of metal.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

These hinges are made of metal.

The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

A grease fitting makes these hinges easy to lubricate.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

The springs in these hinges swing doors and gates fully open after a light push on the door.

Use these hinges on lightweight screen and storm doors as well as small gates.

These hinges are made of metal.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Eliminate slamming lids—these hinges hold lids open at their widest angle and then slowly pull them closed.

Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

Plastic bushings on these metal hinges prevent metal-to-metal contact that can release particles as hinges open and close.