Quick-Release Hoist Rings

Filter by

System of Measurement

Thread Size

Thread Length

Movement

Vertical Capacity

Inside Width

Pin Type

Overall Height

Material

Specifications Met

Pin Length

Fabrication

Installation Torque

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Certification

Thread Pitch

Height

Torque

Pin Material

Safety Factor

16 Products

Quick-Release-Pin Hoist Rings—For Lifting


180° Pivot	180° Pivot and 360° Swivel


Retractable Threads	180° Pivot

360° Swivel

Easily slip these hoist rings in and out of threaded holes by pushing the button to retract their threads. Install them flush to your mounting surface. Ideal for angular lifting, these hoist rings withstand stresses that break or bend eyebolts.

All are CE marked, so they meet European safety standards.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.

Warning: Never use to lift people or items over people.

180° Pivot—The ring on 180° pivot hoist rings moves from front to back. Their base does not swivel for added stability.

180° Pivot and 360° Swivel—180° pivot and 360° swivel hoist rings not only have a ring that moves from front to back, but their base also swivels to handle pitch, roll, and sway when lifting heavy or unbalanced loads.

	Overall Ht.	Pin Lg.	Vert. Cap., lb.	Specs. Met	Certification		Each
Machined Steel







	180° Pivot

	1/2"-13	11/16"	1 3/16"	4 3/8"	15/16"	1,525	EN 13155	CE Marked	0000000	0000000


	3/4"-10	7/8"	1 7/16"	5 11/16"	1 3/16"	3,615	EN 13155	CE Marked	0000000	000000
	1"-8	1 1/16"	2"	7 7/16"	1 7/16"	6,765	EN 13155	CE Marked	0000000	000000
	M10 × 1.5 mm	14 mm	30 mm	108 mm	20 mm	875	EN 13155	CE Marked	0000000	000000
	M12 × 1.75 mm	17 mm	30 mm	112 mm	24 mm	1,390	EN 13155	CE Marked	0000000	000000
	M16 × 2 mm	17 mm	30 mm	112 mm	24 mm	1,885	EN 13155	CE Marked	0000000	000000
	M20 × 2.5 mm	22 mm	36 mm	144 mm	30 mm	3,730	EN 13155	CE Marked	0000000	000000
	M24 × 3 mm	27 mm	50 mm	188 mm	36 mm	5,170	EN 13155	CE Marked	0000000	000000




			180° Pivot and 360° Swivel

			1/2"-13	11/16"	1 13/16"	5 13/16"	15/16"	1,525	EN 13155	CE Marked	0000000	000000


			3/4"-10	7/8"	2 3/4"	7 3/4"	1 3/16"	3,615	EN 13155	CE Marked	0000000	000000
			1"-8	1 1/16"	2 3/4"	8 1/4"	1 7/16"	4,155	EN 13155	CE Marked	0000000	000000
			M10 × 1.5 mm	14 mm	46 mm	144 mm	20 mm	875	EN 13155	CE Marked	0000000	000000
			M12 × 1.75 mm	17 mm	46 mm	148 mm	24 mm	1,390	EN 13155	CE Marked	0000000	000000
			M16 × 2 mm	17 mm	46 mm	148 mm	24 mm	1,885	EN 13155	CE Marked	0000000	000000
			M20 × 2.5 mm	22 mm	70 mm	198 mm	30 mm	3,730	EN 13155	CE Marked	0000000	000000
			M24 × 3 mm	27 mm	70 mm	209 mm	36 mm	4,155	EN 13155	CE Marked	0000000	000000