About Lifting with Hoist Rings
More
Hoist Rings—For Lifting
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel hoist rings have mild corrosion resistance.
Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
316 stainless steel hoist rings are the most corrosion resistant.
High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.
Hoist rings that are CE marked meet European safety standards.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size  | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1"-8 | 1 1/2" | 3 5/8" | 11 1/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 0000000 |
Forged Black-Oxide Steel | ||||||||
| 1"-8 | 1 1/4" | 3" | 8 5/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 1/4" | 3" | 10 1/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 5/16" | 2 3/4" | 7 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 5/16" | 2 3/4" | 9 1/2" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 1/2" | 2 13/16" | 10" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 1/2" | 3" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 1/2" | 3" | 10 1/2" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 9/16" | 2 3/4" | 9 3/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 2 1/4" | 3" | 9 5/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 2 1/4" | 3" | 11 1/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 2 5/16" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
| 1"-8 | 2 5/16" | 2 3/4" | 10 1/2" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Machined Black-Oxide Steel | ||||||||
| 1"-8 | 1 9/16" | 2 3/4" | 8 1/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 2 5/16" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 000000 |
Forged Fluorescent Green Powder-Coated Steel—High Visibility | ||||||||
| 1"-8 | 1 7/16" | 3" | 8 13/16" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged Nickel-Plated Steel | ||||||||
| 1"-8 | 1 1/2" | 3" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined Nickel-Plated Steel | ||||||||
| 1"-8 | 1 1/4" | 2 3/4" | 7 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 1 1/2" | 2 3/4" | 8 1/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
| 1"-8 | 2 1/4" | 2 3/4" | 8 7/8" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined 316 Stainless Steel | ||||||||
| 1"-8 | 2 5/16" | 2 7/8" | 8 7/8" | 5,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Side-Mount Hoist Rings—For Lifting
Choose these hoist rings when you need to lift your load from the side. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
D-shape hoist rings have a wider end than triangle hoists, so it’s easier to attach webbing and large hooks.
Triangle hoist rings have a narrow end to keep chain in place.
Black-oxide steel hoist rings have mild corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Swivel-Under-Load Hoist Rings—For Lifting
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Yellow Powder-Coated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1"-8 | 1 1/2" | 2" | 7 7/8" | 12,340 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 0000000 |
Removable-Shackle Hoist Rings—For Lifting
Remove the shackle after lifting while keeping the base installed for future use. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Black-Oxide Steel Base with Zinc-Plated Steel Eye | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1"-8 | 1 1/2" | 2 5/8" | 8 3/4" | 10,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 0000000 |
Quick-Release Hoist Rings—For Lifting
Easily slip these hoist rings in and out of threaded holes by pushing the button to retract their threads. Install them flush to your mounting surface. Ideal for angular lifting, these hoist rings withstand stresses that break or bend eyebolts.
All are CE marked, so they meet European safety standards.
The ring on 180° pivot hoist rings moves from front to back. Their base does not swivel for added stability.
180° pivot and 360° swivel hoist rings not only have a ring that moves from front to back, but their base also swivels to handle pitch, roll, and sway when lifting heavy or unbalanced loads.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Tension-Indicating Hoist Rings—For Lifting
An indicator dot changes from red to black when these hoist rings are properly tightened, eliminating the need for a torque wrench. The dot changes back to red if the hoist ring comes loose. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. A black oxide finish gives these hoist rings mild corrosion resistance.
Install the base of these hoist rings flush to your mounting surface.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Rings | Replacement Bolt Kits | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Tension Indicated, ft.-lbs. | Indicator Temperature Range, °F | Movement | Specifications Met | Each | Each | ||
Black-Oxide Steel with Zinc-Plated Steel Bolt | ||||||||||||
| 1"-8 | 1 1/4" | 2 13/16" | 7 3/4" | 10,000 | 230 | 0° to 165° | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 0000000 | 0000000 | 0000000 |
| 1"-8 | 1 1/2" | 2 13/16" | 8" | 10,000 | 230 | 0° to 165° | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 000000 | 0000000 | 000000 |
| 1"-8 | 2 1/4" | 2 13/16" | 8 3/4" | 10,000 | 230 | 0° to 165° | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 000000 | 0000000 | 000000 |
Hoist Ring Assortments—For Lifting
Keep on hand all the parts needed to assemble custom hoist rings. Ideal for angular lifting, these hoist rings will withstand stresses that bend or break eyebolts. The base of these hoist rings will swivel 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. The shackle will pivot 180° front to back. All parts have a black oxide finish for mild corrosion resistance.
Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
| Number of Pieces | Thread Size | Movement | Includes | Specifications Met | Each | |
Black-Oxide Steel | ||||||
|---|---|---|---|---|---|---|
| 104 | 1/2"-13 5/8"-11 3/4"-10 7/8"-9 1"-8 | 180° Pivot and 360° Swivel | Four 3/4" Dia. Shackles Four 1" Dia. Shackles Four 1/2"-13 Bolts for 3/4" Dia. Shackle—2,500 lbs. Capacity and 1" Thread Lg. Four 5/8"-11 Bolts for 3/4" Dia. Shackle—4,000 lbs. Capacity and 1" Thread Lg. Four 3/4"-10 Bolts for 3/4" Dia. Shackle—5,000 lbs. Capacity and 1" Thread Lg. Four 3/4"-10 Bolts for 1" Dia. Shackle—7,000 lbs. Capacity and 1 1/2" Thread Lg. Four 7/8"-9 Bolts for 1" Dia. Shackle—8,000 lbs. Capacity and 1 1/2" Thread Lg. Four 1"-8 Bolts for 1" Dia. Shackle—10,000 lbs. Capacity and 1 1/2" Thread Lg. 24 Bushings 24 Retaining Rings 24 Washers | ASME B30.26 | 0000000 | 000000000 |
Eyebolts—For Lifting
Zinc-plated steel eyebolts offer good corrosion resistance.
304 stainless steel eyebolts are more corrosion resistant than galvanized steel.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Specifications Met | Overall Lg. | Each | |
With Shoulder | ||||||||
Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 25/32" | 9,000 | ASTM A489 | 6 7/8" | 0000000 | 000000 |
| 1"-8 | 3" | 3" | 1 13/16" | 9,000 | __ | 7 1/4" | 00000000 | 00000 |
| 1"-8 | 4" | 4" | 1 13/16" | 9,000 | __ | 8 1/4" | 00000000 | 00000 |
| 1"-8 | 4 1/2" | 4 1/2" | 1 13/16" | 9,000 | __ | 8 3/4" | 00000000 | 00000 |
| 1"-8 | 5" | 5" | 1 25/32" | 9,000 | __ | 9 3/8" | 00000000 | 00000 |
Zinc-Plated Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,000 | __ | 7" | 00000000 | 00000 |
| 1"-8 | 3" | 3" | 1 13/16" | 9,000 | __ | 7 1/4" | 00000000 | 00000 |
| 1"-8 | 4" | 4" | 1 13/16" | 9,000 | __ | 8 1/4" | 00000000 | 00000 |
| 1"-8 | 4 1/2" | 4 1/2" | 1 13/16" | 9,000 | __ | 8 3/4" | 00000000 | 00000 |
| 1"-8 | 5" | 5" | 1 25/32" | 9,000 | __ | 9 3/8" | 00000000 | 00000 |
304 Stainless Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 25/32" | 9,000 | __ | 6 5/8" | 00000000 | 000000 |
Without Shoulder | ||||||||
Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 25/32" | 9,000 | ASTM A489 | 6" | 0000000 | 00000 |
| 1"-8 | 3" | 3" | 1 13/16" | 9,000 | __ | 6 1/2" | 00000000 | 00000 |
| 1"-8 | 4" | 4" | 1 13/16" | 9,000 | __ | 7 1/2" | 00000000 | 00000 |
| 1"-8 | 5" | 5" | 1 13/16" | 9,000 | __ | 8 1/2" | 00000000 | 00000 |
Zinc-Plated Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,000 | __ | 6" | 00000000 | 00000 |
| 1"-8 | 3" | 3" | 1 13/16" | 9,000 | __ | 6 1/2" | 0000000 | 00000 |
| 1"-8 | 5" | 5" | 1 13/16" | 9,000 | __ | 8 1/2" | 00000000 | 00000 |
304 Stainless Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,350 | __ | 6 1/8" | 00000000 | 000000 |
Eyebolts with Nuts—For Lifting
Also known as nut eyebolts, these are designed for through-hole applications.
Galvanized steel eyebolts have a hot-dipped finish for corrosion resistance.
304 stainless steel eyebolts are more corrosion resistant than galvanized steel.
316 stainless steel are the most corrosion resistant eyebolts.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | Nuts | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Threading | No. Included | Style | Overall Lg. | Each | |
With Shoulder | ||||||||||
Galvanized Steel | ||||||||||
| 1"-8 | 3" | 6" | 2" | 10,000 | Partially Threaded | 1 | Hex | 10 1/2" | 0000000 | 000000 |
| 1"-8 | 4" | 9" | 2" | 10,000 | Partially Threaded | 1 | Hex | 13 1/4" | 0000000 | 00000 |
304 Stainless Steel | ||||||||||
| 1"-8 | 3" | 6" | 2" | 9,350 | Partially Threaded | 1 | Hex | 10 3/4" | 0000000 | 000000 |
316 Stainless Steel | ||||||||||
| 1"-8 | 1 3/8" | 1 7/16" | 2" | 9,350 | Partially Threaded | 1 | Hex | 5 3/8" | 00000000 | 000000 |
| 1"-8 | 2 1/4" | 2 1/2" | 2" | 9,350 | Partially Threaded | 1 | Hex | 6 3/8" | 00000000 | 000000 |
| 1"-8 | 3" | 6" | 2" | 9,350 | Partially Threaded | 1 | Hex | 9 7/8" | 0000000 | 000000 |
Without Shoulder | ||||||||||
Galvanized Steel | ||||||||||
| 1"-8 | 3" | 6" | 2" | 10,000 | Partially Threaded | 1 | Hex | 9 3/4" | 0000000 | 00000 |
| 1"-8 | 4" | 9" | 2" | 10,000 | Partially Threaded | 1 | Hex | 12 3/4" | 0000000 | 00000 |
| 1"-8 | 4" | 12" | 2" | 10,000 | Partially Threaded | 1 | Hex | 15 3/4" | 0000000 | 00000 |
| 1"-8 | 6" | 18" | 2" | 10,000 | Partially Threaded | 1 | Hex | 21 3/4" | 0000000 | 00000 |
| 1"-8 | 6" | 24" | 2" | 10,000 | Partially Threaded | 1 | Hex | 27 3/4" | 0000000 | 000000 |
304 Stainless Steel | ||||||||||
| 1"-8 | 3" | 6" | 2" | 9,350 | Partially Threaded | 1 | Hex | 10" | 0000000 | 000000 |
316 Stainless Steel | ||||||||||
| 1"-8 | 1 3/8" | 1 7/16" | 2" | 9,350 | Partially Threaded | 1 | Hex | 5 3/4" | 00000000 | 000000 |
| 1"-8 | 2 1/4" | 2 1/2" | 2" | 9,350 | Partially Threaded | 1 | Hex | 6 7/8" | 00000000 | 000000 |
| 1"-8 | 3" | 6" | 2" | 9,350 | Partially Threaded | 1 | Hex | 10 3/8" | 0000000 | 000000 |
Rotating Eyebolts—For Lifting
Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.
Powder-coated steel eyebolts are impact resistant, but less corrosion resistant than stainless steel eyebolts. They include a removable key for tightening the bolt.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
Thread | With Shoulder | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Overall Lg. | Eye Dia. | Vertical Capacity, lbs. | Color | Each | |
Powder-Coated Steel | ||||||||
| 1"-8 | 1 3/8" | 1 3/8" | 5" | 1 7/8" | 7,050 | Pink | 0000000 | 0000000 |
Nylon-Coated Eyebolts—For Lifting
Route wire and cable through the smooth eye without snagging.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Temperature Range, °F | Overall Lg. | Each | |
Nylon-Coated Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,000 | 30° to 275° | 7" | 0000000 | 000000 |
Low-Visibility Eyebolts—For Lifting
The matte black-oxide finish won't reflect light, allowing the eyebolts to blend into the background.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread | With Shoulder | |||||||
|---|---|---|---|---|---|---|---|---|
| Size | Lg. | Shank Lg. | Eye Dia. | Vertical Capacity, lbs. | Appearance | Overall Lg. | Each | |
Black-Oxide Steel | ||||||||
| 1"-8 | 2 1/2" | 2 1/2" | 1 13/16" | 9,000 | Dull | 6 5/8" | 0000000 | 000000 |
Low-Temperature Eyebolts—For Lifting
These eyebolts retain their strength in temperatures as low as -40° F.
Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Eye Nuts—For Lifting
Create your own lifting eye by adding an eye nut to a stud or bolt.
Zinc-plated steel eye nuts offer good corrosion resistance.
Galvanized steel eye nuts have a hot-dipped finish for more corrosion resistance than zinc-plated steel.
Note: Capacity applies to the eye nut only. The stud or bolt you use will affect the overall capacity. Eye nuts are for vertical lifting only.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.