About Lifting with Hoist Rings
More
Hoist Rings—For Lifting
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel hoist rings have mild corrosion resistance.
Nickel-plated steel hoist rings are more corrosion resistant than black-oxide steel hoist rings.
17-4 PH stainless steel hoist rings are more corrosion resistant than steel hoist rings.
316 stainless steel hoist rings are the most corrosion resistant.
High-visibility hoist rings are fluorescent green, so they’re easy to distinguish from other hardware when attached to equipment being lifted.
Hoist rings that are CE marked meet European safety standards.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size  | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Forged Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/8"-16 | 9/16" | 1 1/2" | 4 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged Black-Oxide Steel | ||||||||
| 3/8"-16 | 9/16" | 1 1/4" | 3 7/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
| 3/8"-16 | 1 1/16" | 1 1/4" | 4 3/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
Machined Black-Oxide Steel | ||||||||
| 3/8"-16 | 9/16" | 13/16" | 3 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
Forged Fluorescent Green Powder-Coated Steel—High Visibility | ||||||||
| 3/8"-16 | 9/16" | 1 5/16" | 3 13/16" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 00000 |
Forged Nickel-Plated Steel | ||||||||
| 3/8"-16 | 9/16" | 1 1/4" | 3 7/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined Nickel-Plated Steel | ||||||||
| 3/8"-16 | 9/16" | 13/16" | 3 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Forged 17-4 PH Stainless Steel | ||||||||
| 3/8"-16 | 9/16" | 1 1/2" | 4 1/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Machined 316 Stainless Steel | ||||||||
| 3/8"-16 | 9/16" | 15/16" | 3 1/4" | 500 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 0000000 | 000000 |
Side-Mount Hoist Rings—For Lifting
Choose these hoist rings when you need to lift your load from the side. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
D-shape hoist rings have a wider end than triangle hoists, so it’s easier to attach webbing and large hooks.
Triangle hoist rings have a narrow end to keep chain in place.
Black-oxide steel hoist rings have mild corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
D-Shape | ||||||||
|---|---|---|---|---|---|---|---|---|
Steel | ||||||||
| 3/8"-16 | 9/16" | 1 3/4" | 4" | 800 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 00000000 | 000000 |
Black-Oxide Steel | ||||||||
| 3/8"-16 | 1/2" | 2 7/8" | 5 5/8" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26 | 0000000 | 000000 |
Triangle | ||||||||
Black-Oxide Steel | ||||||||
| 3/8"-16 | 1/2" | 1 1/2" | 5 1/4" | 1,000 | 180° Pivot and 360° Swivel | ASME B30.26 | 0000000 | 000000 |
Nonswiveling Hoist Rings—For Lifting
The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque wrenches are sold separately.
Triangle hoist rings have a narrow end to keep chain in place.
Black-oxide steel hoist rings have mild corrosion resistance.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Number of Mounting Holes | Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Fasteners Included | Specifications Met | Each | |
Round | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Red Powder-Coated Steel | ||||||||||
| 2 | 3/8"-16 | 5/8" | 2 1/2" | 6" | 2,500 | 180° Pivot | Yes | __ | 00000000 | 0000000 |
Triangle | ||||||||||
Black-Oxide Steel | ||||||||||
| 2 | 3/8"-16 | 3/4" | 1 1/4" | 4 5/8" | 2,500 | 180° Pivot | Yes | ASME B30.26 | 00000000 | 00000 |
Hoist Ring Assortments—For Lifting
Keep on hand all the parts needed to assemble custom hoist rings. Ideal for angular lifting, these hoist rings will withstand stresses that bend or break eyebolts. The base of these hoist rings will swivel 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. The shackle will pivot 180° front to back. All parts have a black oxide finish for mild corrosion resistance.
Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
| Number of Pieces | Thread Size | Movement | Includes | Specifications Met | Each | |
Black-Oxide Steel | ||||||
|---|---|---|---|---|---|---|
| 124 | 1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 5/8"-11 3/4"-10 | 180° Pivot and 360° Swivel | Four 3/8" Dia. Shackles Four 1/2" Dia. Shackles Four 3/4" Dia. Shackles Four 1/4"-20 Bolts for 3/8" Dia. Shackle—600 lbs. Capacity and 1/2" Thread Lg. Four 5/16"-18 Bolts for 3/8" Dia. Shackle—800 lbs. Capacity and 1/2" Thread Lg. Four 3/8"-16 Bolts for 3/8" Dia. Shackle—1,000 lbs. Capacity and 1/2" Thread Lg. Four 7/16"-14 Bolts for 1/2" Dia. Shackle—2,000 lbs. Capacity and 1" Thread Lg. Four 1/2"-13 Bolts for 1/2" Dia. Shackle—2,500 lbs. Capacity and 1" Thread Lg. Four 5/8"-11 Bolts for 3/4" Dia. Shackle—4,000 lbs. Capacity and 1" Thread Lg. Four 3/4"-10 Bolts for 3/4" Dia. Shackle—5,000 lbs. Capacity and 1" Thread Lg. 28 Bushings 28 Retaining Rings 28 Washers | ASME B30.26 | 0000000 | 000000000 |
Multi-Thread Hoist Rings—For Lifting
With three different thread sizes, these hoist rings are useful when you need to lift different types of equipment. All have a black-oxide finish for mild corrosion resistance.
To install, screw in one of the threaded studs until the base of these hoist rings is flush to your mounting surface. You can leave the base installed and only remove the shackle to save time during your next use.
Warning: These hoist rings are for vertical lifting only. Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity | Specifications Met | Each | |
Black-Oxide Steel | |||||||
|---|---|---|---|---|---|---|---|
| 1/4"-20 5/16"-18 3/8"-16 | 1/2" 1/2" 1/2" | 1 3/16" | 3 9/16" | 400 lbs. 800 lbs. 1,400 lbs. | ASME B30.26 | 0000000 | 0000000 |
Swivel-Under-Load Hoist Rings—For Lifting
The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended. For unbalanced or heavy loads, the base also swivels to compensate for pitch, roll, and sway. Their lifting ring pivots 180° front to back. Ideal for angular lifting, these hoist rings withstand stresses that bend or break eyebolts.
Install the base of these hoist rings flush to your mounting surface. Use a torque wrench to tighten to the recommended torque stamped on the ring.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Lg. | Inside Wd. | Overall Ht. | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Yellow Powder-Coated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/8"-16 | 13/16" | 1 3/8" | 5 11/16" | 1,410 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked | 0000000 | 0000000 |