From navigating around your facility to raising heavy loads, every movement these cranes make is fully powered. They have a battery-powered hydraulic pump that keeps movements consistent and controlled, including when you’re moving the arm in, out, up, and down to position loads. On a single charge, their battery lasts for four hours of continuous use or eight hours of intermittent use. Turn the throttle to adjust the speed of travel and push buttons to position the arm.

To prevent collisions when moving these cranes in reverse, hit the emergency safety switch to quickly move them forward in the opposite direction. You can also sound the horn to alert people nearby. There’s no need to worry about them rolling away from you—an automatic brake stops them from moving as soon as you let go of the handle. Adjust the length of the legs to distribute loads more evenly, reducing the risk that these cranes will tip.

Warning: Never use to lift people or items over people.

Position loads and maneuver with ease in tight spaces. Instead of long legs, these cranes are balanced with a counterweight in the back. The added room in front means you can push these cranes against surfaces to maximize the arm’s reach. No need for a hoist: a battery-powered hydraulic pump raises and lowers the arm to move loads. This means you can lift heavy parts regardless of whether an outlet’s nearby. To extend the reach of the arm – also known as the boom – manually adjust it between four positions. These cranes have an emergency stop button that quickly prevents them from moving any further if there's a risk of collision. Lock the caster wheels to keep them from rolling while lifting.

An extension cord is required to recharge the battery.

Warning: Never use to lift people or items over people.

No hand-cranking needed—simply push a button on the handheld control to lift or lower a heavy load. These cranes are also known as davit cranes. The automatic brake holds your load securely in place when you’re not moving it up or down. For precise positioning in all directions, these cranes rotate a full 360°. The arm can be adjusted to four different heights depending on your needs.

Battery-powered cranes work in locations without electrical outlets. Use the wire leads to connect them to a 12V DC battery (not included).

Install additional bases throughout your facility to make it easy to use your crane in different spots. Make sure the maximum capacity of your crane matches the capacity of the base you choose.

Headache balls keep the cable taut when there’s no load, making the crane more stable for safety.

Note: Capacity is highest for the first layer of rope and decreases as each additional layer of rope is wound on the winch. There are at least five wraps of rope on the winch.

Warning: Never use to lift people or items over people.

Keep a safe distance from heavy loads—these lifters automatically engage when set down, so you don’t have to secure the magnet to the load yourself. When these lifters sense they’ve been set down again, they’ll automatically release the load. Alternatively, use the push buttons on these lifters to manually turn the magnet on and off. As a fail-safe, the magnet stays engaged even if the battery dies, preventing your load from dropping. Pair these lifters with a crane or hoist. They’re often used to move large metal sheets and pipes but can also be used to position loads when grinding or fixturing metal parts together.

You can adjust the magnet’s strength on these lifters to protect thin materials from damage. Fine-tuning the strength is also useful for lifting just one sheet off a stack at a time.

Lifters with a remote control give you a way to manually turn the magnet on or off from a distance.

Warning: Never use to lift people or items over people.

Lift and position windows, large metal sheets, and even solar panels scratch free. These lifters connect to a crane or hoist and use suction cups to grip material. This makes them more gentle than tongs or plate clamps that can scratch delicate surfaces. For precise positioning, you can tilt these lifters up to 90° and rotate them 180°. As you rotate them, you can lock them at 45° increments. To prevent shifting during installation, they’ll automatically lock at 90°.

The battery-powered vacuum pump generates and maintains strong suction. If suction is lost, the pump senses it and automatically reactivates to maintain grip. A vacuum gauge lets you monitor pressure to stay within safe operating limits. If the pump runs out of battery during a lift, these lifters have a vacuum reserve tank that allows them to maintain grip and support the load for at least five minutes. Each lifter includes a battery gauge and a charger.

Vacuum cups for smooth and textured surfaces will grip stone slabs, pebbled fiberglass, and textured tiles. They have a sealing ring that resists abrasive particles. Keep in mind, they have a lower lifting capacity than vacuum cups designed for smooth surfaces only.

Warning: Never use to lift people or items over people.

From the comfort of your forklift, just push a button to dispense heavy drums into large containers, vats, and hoppers. The battery-powered tilt offers greater precision than a manual tilt for a smoother, more controlled pour. You can rotate drums 180° in either direction. It takes about 15 seconds to fully invert them. On a single charge, you’ll be able to empty about 70 drums. These dispensers slide onto your forklift forks and secure with thumb screws. A chain with a ratchet-style tightener holds the drum in place.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom of the drum. They give the dispenser enough stability to be used with rimless plastic and fiber drums.

Note: Contents shift in half-full drums, which reduces capacity.

Warning: Never use to lift people or items over people.