Screw these studs into a tapped hole and use them as a pivot point, hinge, shaft, or locator pin.

Also known as hood pins, these studs have a cotter pin lodged through a drilled hole in the unthreaded portion for light duty holding, such as securing access panels and locking other fasteners.

18-8 stainless steel studs have good chemical resistance.

These metric 316 stainless steel studs have excellent resistance to chemicals and salt water. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

Turn these studs with a hex key for ease of installation.

These studs have good chemical resistance. Weld them to stainless steel surfaces.

316 stainless steel studs have excellent resistance to chemicals and salt water.

Stick these studs to nearly any surface for a strong bond and a watertight seal.

Add a stud to thin material when you only have access to one side.

Also known as tank-strap bolts, these T-bolts are commonly used with a band clamp or a strap to hold fuel tanks and other objects in place.

You can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt).

Wedge these hangers in concrete and other solid materials.

Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.

The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. Once tightened, the spring adds vibration resistance.

These steel anchors are available with corrosion-resistant finishes.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

The removable flat head provides a flush finish in countersunk holes.

These 18-8 stainless steel anchors have good chemical resistance.

A hex head allows for a secure grip with a wrench.

Turn the bolt to expand the nut for a secure hold in concrete. These anchors are often used to anchor machinery.

These steel anchors are available with corrosion-resistant finishes.

These stud anchors strengthen the parts of buildings where steel framing connects to concrete. They’re also known as Nelson studs.

These stud-style anchors include a nut and a washer.

High-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed.

A shallow head makes these bolts good for low-clearance applications.

Use these stud-style anchors with nuts.