An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.

Use these saws with a drill press to cut a variety of hole sizes in sheet metal.

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

Specially designed teeth cut faster than the teeth on standard hole saws.

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

With two adjustable blades, these saws cut a variety of hole sizes in ceilings, walls, floors, and other surfaces made of drywall, plaster, plastic, and wood. To block flying chips and collect dust, they have a clear debris shield.

The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth.

The saws in these kits have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites.

These kits have saws with high-speed steel teeth and a steel body.

Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.

Make oblong holes in fabric, leather, and rubber. Also known as arch punches.

Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.

Sets include common ID and OD sizes to create gaskets and washers in two strikes.

Slide thin sheets of material into the included die block then punch an inner and outer hole to create a shim or washer.

Use a wrench to cut DIN-size holes in steel up to 1/16" thick.

These steel punches cut through aluminum and steel fast to make openings for DB connectors.

Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

The included hydraulic driver allows you to punch conduit up to size 2.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to stud-driven hole punches.

Includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material.

Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.

Squeeze the spring-return handle to punch round holes of a single size.

About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°.

Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.

A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material.

When the blade gets dull, snap it off to expose a new, sharp edge. This cutter has a utility knife mounted on a radius bar.

Ensure precise cuts with a measuring scale and adjustable blade depth.

Pads are marked with inch and centimeter grid lines to guide your cut.

Use these bits for general purpose drilling in most material.

These jobbers'-length bits have the rigidity and length required for most applications.

Also known as mechanics' bits, these are shorter and more rigid than jobbers’ bits but longer than short‐length bits.

Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.

Holes in these bits allow coolant to be run through the tool for more efficient chip evacuation. Use them in CNC machines with coolant-through technology.

The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.

The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.

Drill safely in flammable environments. Made of Factory Mutual (FM) approved beryllium copper, these bits won’t create sparks that could ignite if they made contact with combustible vapors or residues.

Access hard-to-reach spots and drill deep holes.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

With better heat and wear resistance than high-speed steel, cobalt steel bits can run up to 25% faster and have a longer tool life.

All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Drill holes up to 1 1/2" in diameter.

These bits have a round or hex shank that fits into the three-jaw chuck on a hammer drill.

Drill holes up to 1 1/2" in diameter.

Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Use these bits with handheld power drills, drill presses, and hammer drills.

Insert these bits directly into power screwdrivers, impact drivers, and other tools that accept 1/4" hex shanks.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

Use these bits with handheld power drills and hammer drills set to rotary-only mode.

Multiple outlining teeth bore clean, flat-bottom holes without chipping or splintering your surface—even when cutting across the grain. Also known as multispur bits.

The screw point draws the bit in, quickly boring holes without applying pressure.

Cut a variety of hole sizes with one bit—slide the blade to the desired cutting diameter marked on the bit and then tighten the screw. Use in a drill press; they are not recommended for use with handheld drills.

Three sharp points allow these bits to drill accurate straight and overlapping holes, even across the grain. Also known as brad-point bits.

These bits have razor-sharp cutting edges for making clean holes in fibrous material.

The spear-shaped point drills smoothly through glass and ceramic.

Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.

Multiple cutting edges on the tip allow these bits to drill quickly through natural stone, granite, and other hard, abrasive material.

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.

Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.

Use for drilling in most metal.

Use for drilling in most metal.