Hammer-Driven Hole Punches
Strengthened edges cut holes in soft metal. These punches are also known as arch punches.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Brass, Copper, Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 9/16" | 4 7/8" | Steel | 0000000 | 000000 |
Hammer-Driven Small Hole Punches
Use these punches to make round holes in soft, nonmetallic materials.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Lg. | Material | Each | |
For Use On Fabric, Leather, Rubber | ||||
|---|---|---|---|---|
| 9/16" | 5" | Steel | 0000000 | 000000 |
One-Step Hammer-Driven Gasket and Washer Punch Sets
Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Aluminum, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | Steel | Plastic Case | 00000000 | 0000000 |
| 15 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16" | Steel | Plastic Case | 00000000 | 000000 |
| 25 Punches, Handle | 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 7/8", 2" | Steel | Plastic Case | 00000000 | 000000 |
| For Hole Dia. | Material | Each | |
| 1/8" | Steel | 00000000 | 000000 |
| 3/16" | Steel | 00000000 | 00000 |
| 1/4" | Steel | 00000000 | 00000 |
| 5/16" | Steel | 00000000 | 00000 |
| 3/8" | Steel | 00000000 | 00000 |
| 7/16" | Steel | 00000000 | 00000 |
| 1/2" | Steel | 00000000 | 00000 |
| 9/16" | Steel | 00000000 | 00000 |
| 5/8" | Steel | 00000000 | 00000 |
| 3/4" | Steel | 00000000 | 00000 |
| 7/8" | Steel | 00000000 | 00000 |
| 1" | Steel | 00000000 | 00000 |
| 1 1/16" | Steel | 00000000 | 00000 |
| 1 1/8" | Steel | 00000000 | 00000 |
| 1 3/16" | Steel | 00000000 | 00000 |
| 1 1/4" | Steel | 00000000 | 00000 |
| 1 5/16" | Steel | 00000000 | 00000 |
| 1 3/8" | Steel | 00000000 | 00000 |
| 1 7/16" | Steel | 00000000 | 00000 |
| 1 1/2" | Steel | 00000000 | 00000 |
| 1 5/8" | Steel | 00000000 | 00000 |
| 1 11/16" | Steel | 00000000 | 00000 |
| 1 3/4" | Steel | 00000000 | 00000 |
| 1 7/8" | Steel | 00000000 | 00000 |
| 2" | Steel | 00000000 | 00000 |
Economy Hammer-Driven Gasket and Washer Punch Sets
This set includes common ID and OD sizes to create gaskets and washers in two strikes.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Brass, Cork, Fabric, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 10 Punches, Handle | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" | Steel | Plastic Case | 0000000 | 000000 |
Quick-Release Hammer-Driven Gasket and Washer Punch Sets
Quickly switch between inner and outer punches to create washers faster than with standard sets.
For technical drawings and 3-D models, click on a part number.
| Includes | For Hole Dia. | Material | Container Type | Each | |
For Use On Cork, Fabric, Fiberglass, Leather, Plastic, Rubber | |||||
|---|---|---|---|---|---|
| 13 Punches, Centering Pin, Handle, Punch Cutting Pad | 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" | Steel | Plastic Case | 0000000 | 0000000 |
Hammer-Driven Hole Punch Sets
The handle and punch are one complete tool.
For technical drawings and 3-D models, click on a part number.
Hydraulic Hole Punches
Our strongest punch, this tool has 35 tons of force to punch through tough materials such as bus bars, railings, and I-beams. It requires a 10,000 psi hydraulic pump (sold separately).
| For Hole Dia. | For Max. Steel Thick. | Punching Force, lbs. | Throat Dp. | Ht. | Wd. | Dp. | Material | Includes | Each | |
For Use On Aluminum, Brass, Copper, Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 7/16", 9/16", 11/16", 13/16" | 1/2" | 70,000 | 2 3/4" | 14" | 3 1/2" | 8" | Steel | 4 Punches, 4 Dies | 0000000 | 000000000 |
| Max. Air Pressure, psi | Power, hp | Voltage | Frequency, Hz | Ht. | Wd. | Dp. | Power Source | Cord Lg., ft. | Plug Type | Includes | Each | |
| 10,000 | 1/2 | 120V AC | 60 | 15 1/2" | 10 1/2" | 9 1/2" | Plug In | 16 | Three Prong | 10-ft. Hydraulic Hose, Fittings, Hydraulic Oil, Pump Controls with 10-ft. Cable | 0000000 | 000000000 |
Hammer-Driven Installation Punches for Grommets with Extended-Neck Washer
These punches set grommets that have an extended-neck washer or an extended-neck tooth lock washer. Strike the punch with a wooden or rawhide mallet. Punch and die are stamped with the corresponding grommet trade size.
| For Grommet Trade Size | For Hole Dia. | Each | |
| 4 | 9/16" | 0000000 | 000000 |