Cut perfectly round holes in a variety of diameters. With variable-set teeth, the saws make quick cuts through wood, sheet metal, and other materials with minimal vibration. Also known as bimetal hole saws, they have high-speed steel teeth and a steel body. Often used to remove more material than drill bits, these saws are helpful for jobs such as creating cutouts for doorknobs or cables. Attach them to a drill or drill press with the included arbors.

Quick-change hole saw arbors use a simple push-and-turn motion to attach and detach the saw. This makes it easy to quickly change sizes, instead of having to screw a hole saw on and off.

Quick-release pilot drill bits are easy to remove—just pull them out of your saw without any special tools.

An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures. The built-in arbor makes these saws easy to attach to a drill or drill press. They come with a pilot drill that has a spring to push out the slug.

Quickly connect these saws to your drill or drill press with the built-in arbor. Saws have high-speed steel teeth for cutting wood, plastic, and metal. A _1/4" diameter pilot drill is included.

The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth. Saws are for use on reinforced plastic, Kevlar, stone, brick, and other abrasive materials with high silicon content. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required. To cut ceramic tile, you must use a 1/4" carbide-tipped pilot drill.

Quickly cut perfectly round holes in multiple sizes—these kits come with at least six hole saws in different diameters. Their specially designed teeth cut through wood, sheet metal, and other materials faster than the teeth on standard hole saws. Made with high-speed steel teeth and a steel body, they’re often called bimetal hole saws. Unlike drills, these saws make circular cuts without cutting up the material of the core. Use them to cut large holes, such as a cutout in a door for a doorknob. Attach them to a drill or drill press with the included arbors.

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. All saws are made entirely of heat-treated high-speed steel for cutting aluminum, brass, bronze, and steel. Attach hole saws to a drill or drill press with the included arbors.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece. The built-in arbor has a _1/4” hex shank that makes these saws easy to attach to your impact drill.

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth. The body widens at the top to prevent the saw from pushing through your workpiece. A built-in arbor makes these saws easy to attach to your drill press. The included pilot drill has a spring that pushes out the slug.

Cut holes in wood and plastic five times faster than standard hole saws and with fewer blade changes. The teeth on these saws are shaped to power through not only wood, particleboard, and plastic but also drywall, plaster, and even masonry. Made of carbide, the teeth are the hardest in our hole saw offering, so they stay sharp up to twice as long as high-speed steel teeth.

To attach these saws to a drill or drill press, you'll need an arbor with a pilot drill bit (sold separately). If you're using an arbor you already have, make sure the pilot drill bit is at least 3 _5/8" long.

Quick-change arbors don’t require an L-key or screwdriver to swap out a dull pilot drill bit—just pull back on the release collar.