Hole Saws
These standard saws have high-speed steel teeth to make circular cuts in wood, plastic, and metal. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required.
For technical drawings and 3-D models, click on a part number.
Long-Life Hole Saws
with
Pilot Drill
The carbide teeth on these saws last up to twice as long as high-speed steel teeth when cutting fiberglass, plastic, wood, and metal such as aluminum, cast iron, steel, and stainless steel. Attach saws to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Fast-Cut Hole Saws
with
Pilot Drill
with
Pilot Drill
Specially designed teeth cut faster than the teeth on standard hole saws. Teeth are high-speed steel for cutting wood, plastic, and metal such as aluminum, brass, steel, and stainless steel. Attach saws to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Hole Saws with Built-In Arbor
Quickly connect these saws to your drill or drill press with the built-in arbor. Saws have high-speed steel teeth for cutting wood, plastic, and metal. A 1/4" diameter pilot drill is included.
For technical drawings and 3-D models, click on a part number.
| Dia. | Arbor Shank Size | Each | |
1 15/16" Cutting Dp. | |||
|---|---|---|---|
| 1 5/16" | 3/8" | 00000000 | 000000 |
Long-Life Hole Saws for Ceramics and Masonry
with
Pilot Drill
with
Pilot Drill
The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth. Saws are for use on reinforced plastic, Kevlar, stone, brick, and other abrasive materials with high silicon content. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required. To cut ceramic tile, you must use a 1/4" carbide-tipped pilot drill.
For technical drawings and 3-D models, click on a part number.
Hole Saws for Sheet Metal
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. Heat-treated high-speed steel teeth cut through aluminum, brass, bronze, and steel. Use these saws on a drill or drill press. An arbor (sold separately) is required.
Arbors with pilot drill guide your cut.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Hole Saws for Stainless Steel Sheets
An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures. The built-in arbor makes these saws easy to attach to a drill or drill press. They come with a pilot drill that has a spring to push out the slug.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Hole Saws for Sheet Metal and Plastic Sheets
The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth. The body widens at the top to prevent the saw from pushing through your workpiece. A built-in arbor makes these saws easy to attach to your drill press. The included pilot drill has a spring that pushes out the slug.
For technical drawings and 3-D models, click on a part number.