316 Stainless Steel Hose End Caps

Filter by

Material

300 Series Stainless Steel

Coupling Size

Cam-and-Groove Component

Fitting Type

Lever Material

Gender

Shape

Pull Ring Material

Socket Locking Type

For Use With

Compatible With

Andrews Cam-and-Groove

Dixon Cam-and-Groove

Ever-Tite Cam-and-Groove

PT Coupling Cam-and-Groove

Socket ID

Fitting Connection

Maximum Pressure @ Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Connects To

Hose

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Maximum Temperature

Minimum Temperature

REACH

RoHS

Gasket Material

Number of Levers

Plug OD

78 Products

About Measuring Fittings

Measure the threaded ends of your fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

Metal Cam-and-Groove Hose Couplings for Water

A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.

Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance thanks to their anodized finish.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

Caps with Locking Levers

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Caps
		Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
1	1 7/16"	2	316 Stainless Steel	Stainless Steel	250 psi @ 72° F	2084T182	000000	10	5345K12	00000	53015K91	000000
1 1/4	1 13/16"	2	316 Stainless Steel	Stainless Steel	250 psi @ 72° F	2084T183	00000	10	5345K13	0000	53015K92	00000
1 1/2	2 1/8"	2	316 Stainless Steel	Stainless Steel	250 psi @ 72° F	2084T184	00000	10	5345K14	0000	53015K93	00000
2	2 1/2"	2	316 Stainless Steel	Stainless Steel	250 psi @ 72° F	2084T185	00000	10	5345K15	0000	53015K94	00000
2 1/2	3"	2	316 Stainless Steel	Stainless Steel	200 psi @ 72° F	2084T186	00000	10	5345K16	0000	53015K94	00000
3	3 5/8"	2	316 Stainless Steel	Stainless Steel	200 psi @ 72° F	2084T187	00000	10	5345K17	00000	53015K417	00000
4	4 3/4"	2	316 Stainless Steel	Stainless Steel	150 psi @ 72° F	2084T188	000000	10	5345K18	00000	53015K417	00000
5	5 3/4"	2	316 Stainless Steel	Stainless Steel	75 psi @ 72° F	2084T189	000000	5	5345K73	00000	53015K417	00000

6" Retaining Chain	2084T629	Each	00000
12" Retaining Chain	2084T673	Each	0000

Safety-Venting Caps with Locking Levers

Maximum Pressure: See table
Temperature Range: -40° to 200° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Use safety-venting sockets and caps to prevent the hose from whipping under pressure as you disconnect it. They have two spring-loaded tabs that grab the plug, so you can open the levers to relieve pressure while the hose stays connected. After releasing the pressure, squeeze the tabs to disconnect the plug.

Caps
		Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Anodized Aluminum
2	2 1/2"	2	316 Stainless Steel	Chrome-Plated Steel	125 psi @ 72° F	5890N21	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	2	316 Stainless Steel	Chrome-Plated Steel	100 psi @ 72° F	5890N22	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	2	316 Stainless Steel	Chrome-Plated Steel	75 psi @ 72° F	5890N23	000000	10	5345K18	00000	5890N25	00000

6" Retaining Chain	2084T629	Each	00000
12" Retaining Chain	2084T673	Each	0000

Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum

Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.

Aluminum fittings are lighter in weight than 316 stainless steel fittings. They have good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

End Plugs

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

316 Stainless Steel
Coupling Size	Plug OD	Max. Pressure		Each
1/2	15/16"	250 psi @ 72° F	53015K708	000000
3/4	1 1/4"	250 psi @ 72° F	53015K71	00000
1	1 7/16"	250 psi @ 72° F	53015K72	00000
1 1/4	1 13/16"	250 psi @ 72° F	53015K73	00000
1 1/2	2 1/8"	250 psi @ 72° F	53015K74	00000
2	2 1/2"	250 psi @ 72° F	53015K75	00000
2 1/2	3"	200 psi @ 72° F	53015K76	00000
3	3 5/8"	200 psi @ 72° F	53015K77	00000
4	4 3/4"	150 psi @ 72° F	53015K78	000000
5	5 3/4"	75 psi @ 72° F	53015K709	000000
6	6 15/16"	75 psi @ 72° F	53015K79	000000

Caps with Locking Levers

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets							Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with 316 Stainless Steel Levers
1	1 7/16"	2	Zinc-Plated Steel	250 psi @ 72° F	2005T61	000000	10	5345K12	00000	53015K91	000000
1 1/4	1 13/16"	2	Zinc-Plated Steel	250 psi @ 72° F	2005T62	00000	10	5345K13	0000	53015K92	00000
1 1/2	2 1/8"	2	Zinc-Plated Steel	250 psi @ 72° F	2005T63	00000	10	5345K14	0000	53015K93	00000
2	2 1/2"	2	Zinc-Plated Steel	250 psi @ 72° F	2005T64	00000	10	5345K15	0000	53015K94	00000
2 1/2	3"	2	Zinc-Plated Steel	200 psi @ 72° F	2005T65	00000	10	5345K16	0000	53015K94	00000
3	3 5/8"	2	Zinc-Plated Steel	200 psi @ 72° F	2005T66	00000	10	5345K17	00000	53015K417	00000
4	4 3/4"	2	Zinc-Plated Steel	150 psi @ 72° F	2005T67	00000	10	5345K18	00000	53015K417	00000
5	5 3/4"	2	Zinc-Plated Steel	75 psi @ 72° F	2005T68	000000	5	5345K73	00000	53015K417	00000
316 Stainless Steel with 316 Stainless Steel Levers
1	1 7/16"	2	304 Stainless Steel	250 psi @ 72° F	53015K182	00000	10	5345K12	0000	53015K91	00000
1 1/4	1 13/16"	2	304 Stainless Steel	250 psi @ 72° F	53015K183	000000	10	5345K13	0000	53015K92	00000
1 1/2	2 1/8"	2	304 Stainless Steel	250 psi @ 72° F	53015K184	000000	10	5345K14	0000	53015K93	00000
2	2 1/2"	2	304 Stainless Steel	250 psi @ 72° F	53015K185	000000	10	5345K15	0000	53015K94	00000
2 1/2	3"	2	304 Stainless Steel	200 psi @ 72° F	53015K186	000000	10	5345K16	0000	53015K94	00000
3	3 5/8"	2	304 Stainless Steel	200 psi @ 72° F	53015K187	000000	10	5345K17	00000	53015K417	00000
4	4 3/4"	2	304 Stainless Steel	150 psi @ 72° F	53015K188	000000	10	5345K18	00000	53015K417	00000
5	5 3/4"	2	304 Stainless Steel	75 psi @ 72° F	53015K189	000000	5	5345K73	00000	53015K417	00000

Safety-Venting Caps with Locking Levers

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -40° to 200° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Safety-venting sockets and safety-venting caps prevent hose whip if you disconnect your hose under pressure. Two spring-loaded tabs on these sockets hold the plug while the pressure releases. After pressure is released, squeeze the tabs to release the plug.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets							Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
316 Stainless Steel with 316 Stainless Steel Levers
2	2 1/2"	2	Chrome-Plated Steel	125 psi @ 72° F	5803N21	0000000	10	5345K15	00000	5890N24	000000
3	3 5/8"	2	Chrome-Plated Steel	100 psi @ 72° F	5803N22	000000	10	5345K17	00000	5890N25	00000
4	4 3/4"	2	Chrome-Plated Steel	75 psi @ 72° F	5803N23	000000	10	5345K18	00000	5890N25	00000

Caps

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Sockets							Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
316 Stainless Steel with 304 Stainless Steel Levers
1/2	15/16"	2	300 Series Stainless Steel	250 psi @ 72° F	53015K808	000000	10	5345K72	00000	53015K411	00000
3/4	1 1/4"	2	300 Series Stainless Steel	250 psi @ 72° F	53015K81	00000	10	5345K11	0000	53015K411	0000
1	1 7/16"	2	300 Series Stainless Steel	250 psi @ 72° F	53015K82	00000	10	5345K12	0000	53015K412	0000
1 1/4	1 13/16"	2	300 Series Stainless Steel	250 psi @ 72° F	53015K83	00000	10	5345K13	0000	53015K413	00000
1 1/2	2 1/8"	2	300 Series Stainless Steel	250 psi @ 72° F	53015K84	00000	10	5345K14	0000	53015K414	00000
2	2 1/2"	2	300 Series Stainless Steel	250 psi @ 72° F	53015K85	00000	10	5345K15	0000	53015K415	0000
2 1/2	3"	2	300 Series Stainless Steel	200 psi @ 72° F	53015K86	000000	10	5345K16	0000	53015K415	0000
3	3 5/8"	2	300 Series Stainless Steel	200 psi @ 72° F	53015K87	000000	10	5345K17	00000	53015K416	00000
4	4 3/4"	2	300 Series Stainless Steel	150 psi @ 72° F	53015K88	000000	10	5345K18	00000	53015K416	00000
6	6 15/16"	2	300 Series Stainless Steel	75 psi @ 72° F	53015K89	000000	5	5345K69	00000	53015K159	00000