How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Barbed Hose Fittings for Compressed Gas
Commonly used in low-pressure welding applications, these fittings connect downstream of your tank and pressure regulator. Slide the barbed end into rubber hose and secure with a crimp-on hose ferrule. Fittings are brass for good corrosion resistance.
Adapters let you adapt to a threaded end so you can connect welding hose to torches or pressure regulators. They consist of a barbed shaft with a rounded end that sits inside a threaded CGA nut (sold separately) so you can make a threaded hose connection. Adapters with a spiral barbed end twist into hose for an easier installation than adapters with a standard barb.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
Adapters | Nuts with Right-Hand Threads | Nuts with Left-Hand Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Hose ID | For CGA Number  | Gas Fitting Size | For Use With | Each | CGA Number | Each | CGA Number | Each | |||
Brass | |||||||||||
| 3/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 00000 | 022 | 000000 | 00000 | 023 | 000000 | 00000 |
| 1/4" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000 | 022 | 000000 | 0000 | 023 | 000000 | 0000 |