How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Zinc-plated steel fittings are stronger and more durable than other metal fittings. They have fair corrosion resistance, so they should be used primarily in dry environments.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Nickel-plated brass fittings resist corrosion better than plain brass fittings.
Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.
Stainless steel fittings have very good corrosion resistance. 303 stainless steel fittings won’t rust when exposed to water, making them good for areas that require frequent cleanings. 303/304 stainless steel fittings also stand up to wet and high-humidity environments.
Fittings that swivel until tightened rotate 360° for easy installation. Fittings with a threaded end are also known as hose nipples.
Fittings with a 45° flared end are also known as refrigeration and SAE fittings.
Hose connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size  | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 000000 |
| 3/16" | 1/4 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 00000 |
| 3/16" | 3/8 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | __ | 1 | 00000000 | 00000 |
Brass | |||||||||
| 3/16" | 1/8 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 10 | 0000000 | 00000 |
| 3/16" | 1/4 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 10 | 0000000 | 00000 |
| 3/16" | 3/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 00000000 | 00000 |
303/304 Stainless Steel | |||||||||
| 3/16" | 1/8 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 00000 |
| 3/16" | 1/4 | 150 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 350° | Worm-Drive Clamp | __ | 1 | 0000000 | 00000 |
- Maximum Pressure: 120 psi @ 72° F, except For 1/8" to 3/16" Hose IDs: 250 psi @ 72° F
- Maximum Vacuum: For 1/8" to 3/16" Hose IDs: 27 in. of Hg @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: See table
- Specifications Met: SAE J476
| For Hose ID | Pipe Size | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 3/16" | 1/8 | Worm-Drive Clamp | 1 | 00000000 | 000000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
| 3/16" | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Nickel-Plated Brass | ||||||||
| 3/16" | 1/8 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Aluminum | ||||||||
| 3/16" | 1/8 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 0000 |
| 3/16" | 1/4 | 125 psi @ 72° F | 27 in. of Hg @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 0000 |
303 Stainless Steel | ||||||||
| 3/16" | 1/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -30° to 200° | Worm-Drive Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 10 | 0000000 | 000000 |
| 3/16" | 1/4 | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 5 | 0000000 | 00000 |
| 3/16" | 3/8 | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp | SAE J476 | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | |||||||
|---|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
| 3/16" | 1/4 | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Nickel-Plated Brass | |||||||
| 3/16" | 1/4 | 125 psi @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Nickel-Plated Brass | |||||||
|---|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
Aluminum | |||||||
| 3/16" | 1/8 | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 3/16" | 1/4 | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" Hose ID: Use Band-and-Buckle Clamps
- Specifications Met: SAE J476
| For Hose ID | For Tube OD | Thread Size | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 3/16" | 1/4" | 7/16"-20 | 5 | 0000000 | 000000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/16" | 250 psi @ 72° F | Not Rated | -40° to 160° | Crimp-On Hose Ferrule | SAE J476 | 5 | 00000000 | 00000 |
- Maximum Pressure: See table
- Maximum Vacuum: See table
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
For Hose ID | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| (A) | (B) | Max. Pressure | Max. Vacuum | Temperature Range, °F | Attachment Type | Specifications Met | Pkg. Qty. | Pkg. | |
Brass | |||||||||
| 3/16" | 1/8" | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | SAE J476 | 1 | 00000000 | 00000 |
| 1/4" | 3/16" | 250 psi @ 72° F | 27 in. of Hg @ 72° F | -40° to 160° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | SAE J476 | 1 | 00000000 | 0000 |
- Maximum Pressure: See table
- Temperature Range: Brass Fittings: -40° to 160° F; Bronze Fittings: 32° to 212° F
- Attachment Type: See table
- Specifications Met: Brass Fittings: SAE J476; Bronze Fittings: ASTM B584, UL 1121
| For Hose ID | Pipe Size | Max. Pressure | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||
|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 250 psi @ 72° F | Crimp-On Hose Ferrule | 2 | 00000000 | 00000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules; except For 1/2" to 3/4" Hose IDs: Use Worm-Drive Clamps, Band-and-Buckle Clamps or Crimp-On Hose Ferrules
- Specifications Met: SAE J476
| For Hose ID | Pkg. Qty. | Pkg. | |
Brass | |||
|---|---|---|---|
| 3/16" | 5 | 00000000 | 000000 |
- Maximum Pressure: 250 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" to 3/4" Hose IDs: Use Worm-Drive Clamps, Band-and-Buckle Clamps or Crimp-On Hose Ferrules
- Specifications Met: SAE J476
| For Hose ID | Pkg. Qty. | Pkg. | |
Brass | |||
|---|---|---|---|
| 3/16" | 2 | 00000000 | 00000 |
Plastic Barbed Hose Fittings for Water
Made of polypropylene, these fittings have good corrosion and abrasion resistance, and are lighter in weight than metal barbed hose fittings. Slide the barbed end into plastic or rubber hose and secure with a clamp.
Fittings with a threaded end are also known as hose nipples.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: 10° to 150° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: See table
- Temperature Range: 10° to 150° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Pipe Size | Color | Max. Pressure | Each | |
Polypropylene Plastic | |||||
|---|---|---|---|---|---|
| 3/16" | 1/4 | Black | 150 psi @ 72° F | 00000000 | 00000 |
Tight-Seal Barbed Hose Fittings for Air and Water
Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into rubber hose and secure with a clamp or a crimp-on hose ferrule. The nut swivels until tightened for easy installation. Fittings are brass for good corrosion resistance.
NPSM (National Pipe Straight Mechanical) female threads are compatible with male NPT and NPTF (Dryseal) threads.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 250 psi @72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Crimp-On Hose Ferrules, except For 1/2" to 3/4" Hose IDs: Use Band-and-Buckle Clamps
- Specifications Met: See table
Industrial Quick-Disconnect Hose Couplings for Air
A complete coupling consists of a plug and a socket (both sold separately or in a set) that connect and disconnect quickly. Use them if you need frequent access to a line. They are also known as industrial interchange couplings. All Industrial plugs are compatible with any of the Industrial sockets of the same coupling size, regardless of the pipe size or barbed hose ID.
Brass is softer than other metals, so it’s easier to thread together. It has good corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 300 psi @ 72° F
- Temperature Range: -40° to 225° F
- Attachment Type: See table
- Specifications Met: See table
Sockets have a shut-off valve that stops the flow when the coupling is separated, so air won’t leak from the line.
Plugs and sockets with a clamp-on/crimp-on barbed end insert into rubber hose and secure with a clamp or a crimp-on hose ferrule.
Sleeve-lock sockets connect by sliding back the sleeve on the socket, inserting the plug, and releasing the sleeve. To disconnect, slide the sleeve back and pull out the plug.
For Plug Tip | ||||||
|---|---|---|---|---|---|---|
| Coupling Size | Lg. | Dia. | For Hose ID | Attachment Type | Each | |
Brass | ||||||
| 1/8 | 1/8" | 1/4" | 3/16" | Worm-Drive Clamp, Band-and-Buckle Clamp | 00000000 | 000000 |
Metal Barbed Hose Fittings for Chemicals and Petroleum
Made of 316 stainless steel, these fittings have the corrosion resistance to stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Max. Pressure | Temperature Range, °F | For Use With | Each | |
316 Stainless Steel | ||||||
|---|---|---|---|---|---|---|
| 3/16" | 1/8 | 300 psi @ 72° F | -40° to 300° | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
| 3/16" | 1/4 | 300 psi @ 72° F | -40° to 300° | Acetone, Boric Acid, Citric Acid, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
Barbed Hose Fittings for Coolant
Fittings have a barbed end that slides into rubber hose and secures with a clamp. All are nylon, which is lightweight with excellent impact and abrasion resistance. They have good corrosion resistance.
Fittings with a threaded pipe connection are also known as hose nipples. They adapt a barbed end to a threaded end.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Color | Each | |
Nylon Plastic | |||
|---|---|---|---|
| 3/16" | Gray | 00000000 | 00000 |
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: See table
- Temperature Range: See table
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Color | Each | |
Nylon Plastic | |||
|---|---|---|---|
| 3/16" | Gray | 00000000 | 00000 |
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Color | Each | |
Nylon Plastic | |||
|---|---|---|---|
| 3/16" | Gray | 00000000 | 00000 |
- Maximum Pressure: 200 psi @ 72° F
- Temperature Range: 0° to 230° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
Barbed Hose Fittings for Compressed Gas
Commonly used in low-pressure welding applications, these fittings connect downstream of your tank and pressure regulator. Slide the barbed end into rubber hose and secure with a crimp-on hose ferrule. Fittings are brass for good corrosion resistance.
Adapters let you adapt to a threaded end so you can connect welding hose to torches or pressure regulators. They consist of a barbed shaft with a rounded end that sits inside a threaded CGA nut (sold separately) so you can make a threaded hose connection. Adapters with a spiral barbed end twist into hose for an easier installation than adapters with a standard barb.
Connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
Adapters | Nuts with Right-Hand Threads | Nuts with Left-Hand Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Hose ID | For CGA Number | Gas Fitting Size | For Use With | Each | CGA Number | Each | CGA Number | Each | |||
Brass | |||||||||||
| 3/16" | 020, 021 | A | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 00000 | 020 | 0000000 | 00000 | __ | 000000 | 00 |
| 3/16" | 022, 023 | B | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 000000 | 000 | 022 | 000000 | 000 | 023 | 000000 | 00000 |
| 3/16" | 032, 033 | B | Air, Argon, Helium, Krypton, Neon, Nitrogen, Water, Xenon | 0000000 | 0000 | 032 | 0000000 | 0000 | 033 | 0000000 | 0000 |
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
- Maximum Pressure: 200 psi @ 72° F
- Maximum Temperature: 120° F
- Attachment Type: Use Crimp-On Hose Ferrules
| For Hose ID | For Use With | Each | |
Brass | |||
|---|---|---|---|
| 3/16" | Air, Compressed Gas, LP Gas, Natural Gas | 000000 | 00000 |
Hose Crimping Tool and Fitting Sets for Compressed Gas
Sets contain a crimping tool and a variety of fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system. Fittings are also known as CGA (Compressed Gas Association) fittings. They are brass for good corrosion resistance.
Barbed adapters let you adapt to a threaded end so you can connect welding hose to pressure regulators or torches. They consist of a barbed shaft with a rounded end that sits inside a threaded nut so you can make a threaded hose connection.
Barbed connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. Slide the barbed end into welding hose and use a hose ferrule and the crimping tool to secure the fitting to hose.
Threaded connectors let you attach threaded welding hose to pressure regulators and torches.
Fittings with left-hand threads are identified with a notch in the nut.
Note: Fittings have a CGA number that corresponds to a specific type of gas. Choose a fitting with the same CGA number as your tank and other system components.
| For Hose ID | No. of Pieces | Includes | Max. Pressure | For Use With | Each | |
Brass | ||||||
|---|---|---|---|---|---|---|
| 3/16", 1/4" | 93 | Crimping Tool Eight barbed hose adapters for 3/16" hose ID (use with A-size nuts) Six barbed hose adapters for 3/16" hose ID (use with B-size nuts) Ten barbed hose adapters for 1/4" hose ID (use with B-size nuts) Two barbed hose connectors for 3/16" hose ID Four barbed hose connectors for 1/4" hose ID One A-size 3/8"-24 male right-hand threaded connector (CGA-020) One A-size 3/8"-24 male left-hand threaded connector (CGA-021) One B-size 9/16"-18 male right-hand threaded connector (CGA-022) One B-size 9/16"-18 male left-hand threaded connector (CGA-023) Four A-size 3/8"-24 right-hand threaded nuts (CGA-020) Four A-size 3/8"-24 left-hand threaded nuts (CGA-021) Eight B-size 9/16"-18 female right-hand threaded nuts (CGA-022) Eight B-size 9/16"-18 female left-hand threaded nuts (CGA-023) Twelve ferrules with 0.45" hose end ID Ten ferrules with 0.562" hose end ID Twelve ferrules with 0.593" hose end ID | 200 psi @ 72° F | Acetylene, Butane, Fuel Gases, LP Gas, Natural Gas, Oxygen, Propane | 0000000 | 0000000 |
Drinking Water Hose Fittings
Fittings meet NSF/ANSI Standard 61 for drinking (potable) water. They are brass, which offers good corrosion resistance. Slide the barbed end into plastic or rubber hose and secure with a clamp or a crimp-on hose ferrule.
Fittings with a threaded pipe end are also known as hose nipples.
Hose connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Worm-Drive Clamps, Crimp-On Hose Ferrules
- Specifications Met: NSF/ANSI 61
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Worm-Drive Clamps, Crimp-On Hose Ferrules
- Specifications Met: NSF/ANSI 61
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Worm-Drive Clamps, Crimp-On Hose Ferrules
- Specifications Met: NSF/ANSI 61
| For Hose ID | Each | |
Brass | ||
|---|---|---|
| 3/16" | 0000000 | 00000 |
Lubrication Hose Fittings
Use these two-piece fittings in grease and lubrication lines. They screw directly onto plastic hose without the need for a separate adapter. To install, separate the two pieces of the fitting (the hose-end portion and the nipple portion). Screw the hose-end portion of the fitting onto the hose, then thread the nipple portion of the fitting into the hose-end portion. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose. Fittings are zinc-plated steel, which is strong and durable with fair corrosion resistance.
Fittings with intermittent swivel rotate 360° until tightened for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 3,000 psi @ 72° F
- Temperature Range: -40° to 120° F
- For Hose Manufacturer Series: Parker HLB
- Specifications Met: SAE J514
Assemble-Your-Own Retracting Air Hose
- Temperature Range: -40° to 200° F
- Material: Nylon
- Color: Red or Yellow
Create a retracting air line that meets your needs.
Fittings come with everything you need to assemble them. Fittings that swivel until tightened are easy to install. Fittings with a spring guard prevent kinking.
| For Hose ID | Pipe Size | Connection | Max. Pressure | Each | |
Male Straight (Swivels Until Tightened) | |||||
|---|---|---|---|---|---|
| 3/16" | 1/4 | Brass Threaded NPT with Spring Guard | 285 psi @ 72° F | 0000000 | 000000 |
Male Straight | |||||
| 3/16" | 1/4 | Brass Threaded NPT with Spring Guard | 285 psi @ 72° F | 0000000 | 0000 |
Male 90° Elbow | |||||
| 3/16" | 1/4 | Brass Threaded NPT with Spring Guard | 285 psi @ 72° F | 0000000 | 0000 |
Female Straight | |||||
| 3/16" | 1/4 | Brass Threaded NPT with Spring Guard | 285 psi @ 72° F | 0000000 | 0000 |
Build-Your-Own High-Pressure Braided Chemical Hose
- Temperature Range: -40° to 350° F
- Hose: PTFE with 304 Stainless Steel Braid
- Female Fittings Swivel Until Tightened
Use shears or a cutoff saw and wrap the hose ends with tape to cut the hose to your desired length and then attach the fittings. You don’t need any special equipment to install. After you attach the fittings, be sure to test the hose for required pressure prior to using.
To attach fittings to hose, push the socket over the stainless steel braid, then wedge the sleeve under the braid. Next, insert the nipple into the hose and hand-tighten the socket onto the nipple. Finish by wrench-tightening the hex nipple until it is flush against the socket.
Female fittings are also known as JIC (Joint Industrial Council) fittings. They swivel until tightened for easy installation. Brass fittings with zinc-plated steel nut have fair corrosion resistance; 303 stainless steel fittings have very good corrosion resistance.
