How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
How to Measure Threaded Pipe Size
More
About Hose
More
Plastic Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of plastic, these couplings are lighter in weight than metal cam-and-groove hose couplings, yet have the chemical resistance to withstand gasoline and other harsh substances. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with male threaded end are also known as F adapters.
Plugs with female threaded end are also known as A adapters.
Plugs with barbed end are also known as E adapters. Insert the barbed end into rubber hose and secure with a clamp.
Sockets with locking levers prevent accidental disconnection. The locking pins engage automatically when the coupling is connected. Press the locking pins simultaneously to disengage.
Sockets with male threaded end are also known as B couplers.
Sockets with female threaded end are also known as D couplers.
Sockets with barbed end are also known as C couplers. Insert the barbed end into rubber hose and secure with a clamp.
PVDF plugs and sockets have better corrosion and chemical resistance than nylon plugs and sockets. Use them when your application involves harsh acids and solvents.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | Pipe Size  | Thread Type | Color | Max. Pressure | Each | |
PVDF Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2 | NPT | White | 125 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 1/4" | 3/4 | NPT | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1 | NPT | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 100 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 100 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 1/2" | 2 | NPT | White | 100 psi @ 72° F | 0000000 | 00000 |
| 3 | 3 5/8" | 3 | NPT | White | 50 psi @ 72° F | 0000000 | 000000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | Pipe Size | Thread Type | Color | Max. Pressure | Each | |
PVDF Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2 | NPT | White | 125 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 1/4" | 3/4 | NPT | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1 | NPT | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 100 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 100 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 1/2" | 2 | NPT | White | 100 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 1/2" | 2 | BSPP | White | 150 psi @ 72° F | 0000000 | 00000 |
| 3 | 3 5/8" | 3 | NPT | White | 50 psi @ 72° F | 0000000 | 00000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
| Coupling Size | Plug OD | For Hose ID | Color | Max. Pressure | Each | |
PVDF Plastic | ||||||
|---|---|---|---|---|---|---|
| 3/4 | 1 1/4" | 1/2" | White | 125 psi @ 72° F | 00000000 | 000000 |
| 3/4 | 1 1/4" | 3/4" | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 | 1 7/16" | 1" | White | 125 psi @ 72° F | 00000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/4" | White | 100 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2" | White | 100 psi @ 72° F | 0000000 | 00000 |
| 2 | 2 1/2" | 2" | White | 100 psi @ 72° F | 0000000 | 00000 |
| 3 | 3 5/8" | 3" | White | 50 psi @ 72° F | 0000000 | 00000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
Sockets | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | |||||||||||
| Coupling Size | Socket ID | Pipe Size | Thread Type | Color | No. of | Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | ||||||||||||
| 1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 000000 |
| 2 | 2 1/2" | 2 | NPT | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
| 2 | 2 1/2" | 2 | BSPT | White | 2 | 304 Stainless Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 |
| 3 | 3 5/8" | 3 | NPT | White | 2 | 304 Stainless Steel | 50 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
Sockets | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | |||||||||||
| Coupling Size | Socket ID | Pipe Size | Thread Type | Color | No. of | Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | ||||||||||||
| 1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 000000 |
| 1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
| 1 1/2 | 2 1/8" | 1 1/2 | BSPP | White | 2 | 304 Stainless Steel | 150 psi @ 72° F | 0000000 | 00000 | 10 | 0000000 | 00000 |
| 2 | 2 1/2" | 2 | NPT | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
| 3 | 3 5/8" | 3 | NPT | White | 2 | 304 Stainless Steel | 50 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
Sockets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | ||||||||||
| Coupling Size | Socket ID | For Hose ID | Color | No. of | Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | |||||||||||
| 1 1/2 | 2 1/8" | 1 1/4" | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 000000 |
| 1 1/2 | 2 1/8" | 1 1/2" | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
| 2 | 2 1/2" | 2" | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
| 3 | 3 5/8" | 3" | White | 2 | 304 Stainless Steel | 50 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 00000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: See table
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
Caps | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | |||||||||
| Coupling Size | Socket ID | Color | No. of | Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | ||||||||||
| 1 1/2 | 2 1/8" | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 000000 | 10 | 0000000 | 000000 |
| 2 | 2 1/2" | White | 2 | 304 Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
| 3 | 3 5/8" | White | 2 | 304 Stainless Steel | 50 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: 125 psi @ 72° F
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
Sockets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | ||||||||||
| Coupling Size | Socket ID | Pipe Size | Thread Type | Color | No. of | Material | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | |||||||||||
| 3/4 | 1 1/4" | 1/2 | NPT | White | 2 | 304 Stainless Steel | 00000000 | 000000 | 10 | 0000000 | 00000 |
| 3/4 | 1 1/4" | 3/4 | NPT | White | 2 | 304 Stainless Steel | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 1 | 1 7/16" | 1 | NPT | White | 2 | 304 Stainless Steel | 00000000 | 00000 | 10 | 0000000 | 0000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: 125 psi @ 72° F
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
Sockets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | ||||||||||
| Coupling Size | Socket ID | Pipe Size | Thread Type | Color | No. of | Material | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | |||||||||||
| 3/4 | 1 1/4" | 1/2 | NPT | White | 2 | 304 Stainless Steel | 00000000 | 000000 | 10 | 0000000 | 00000 |
| 3/4 | 1 1/4" | 3/4 | NPT | White | 2 | 304 Stainless Steel | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 1 | 1 7/16" | 1 | NPT | White | 2 | 304 Stainless Steel | 00000000 | 00000 | 10 | 0000000 | 0000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: 125 psi @ 72° F
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | |||||||||
| Coupling Size | Socket ID | For Hose ID | Color | No. of | Material | Each | Pkg. Qty. | Pkg. | ||
PVDF Plastic | ||||||||||
| 3/4 | 1 1/4" | 1/2" | White | 2 | 304 Stainless Steel | 00000000 | 000000 | 10 | 0000000 | 00000 |
| 3/4 | 1 1/4" | 3/4" | White | 2 | 304 Stainless Steel | 00000000 | 00000 | 10 | 0000000 | 0000 |
| 1 | 1 7/16" | 1" | White | 2 | 304 Stainless Steel | 00000000 | 00000 | 10 | 0000000 | 0000 |
- For Use With:
Nylon Plastic: Diesel Fuel, Gasoline, Varnish
PVDF Plastic: Diesel Fuel, Gasoline, Nitric Acid, Phosphoric Acid - Maximum Pressure: 125 psi @ 72° F
- Temperature Range:
Nylon Plastic: -30° to 200° F
PVDF Plastic: -20° to 250° F - Specifications Met: Fed. Spec. A-A-59326
Plastic Barbed Hose Fittings for Chemicals and Petroleum
Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp. Also known as hose nipples, they adapt a barbed end to a threaded end.
PVDF fittings have better chemical and corrosion resistance than nylon fittings. Use them when your application involves harsh acids.
For technical drawings and 3-D models, click on a part number.
- For Use With: Citric Acid, Mineral Oil, Nitric Acid, Phosphoric Acid
- Maximum Pressure: See table
- Temperature Range: -20° to 300° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
| For Hose ID | Pipe Size | Color | Max. Pressure | Each | |
PVDF Plastic | |||||
|---|---|---|---|---|---|
| 1/2" | 1/2 | White | 125 psi @ 72° F | 0000000 | 000000 |
| 3/4" | 3/4 | White | 125 psi @ 72° F | 0000000 | 00000 |
| 1" | 1 | White | 125 psi @ 72° F | 0000000 | 00000 |
| 1 1/4" | 1 1/4 | White | 100 psi @ 72° F | 0000000 | 00000 |
| 1 1/2" | 1 1/2 | White | 100 psi @ 72° F | 0000000 | 00000 |
| 2" | 2 | White | 100 psi @ 72° F | 0000000 | 00000 |
| 3" | 3 | White | 50 psi @ 72° F | 0000000 | 00000 |
High-Temperature Medium-Pressure Chemical Hose with Fittings
- Temperature Range: -40° to 350° F
- Maximum Vacuum: 29" of Hg @ 72° F
- Material: 1/2" and 3/4" ID hose is PTFE with EPDM Rubber Cover; 1" to 2" ID hose is FEP with EPDM Rubber Cover.
- Color: Green with Yellow Stripe
This hose can stand up to chemicals at high temperatures. 316 stainless steel fittings have excellent corrosion resistance; steel fittings have excellent strength.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | ID | OD | Bend Radius | Max. Pressure | Other Lengths, ft. | 1 ft. | 2 ft. | 3 ft. | 4 ft. | 5 ft. | 10 ft. | 15 ft. | 20 ft. | 25 ft. | 50 ft. | |
316 Stainless Steel Threaded NPT Male × 316 Stainless Steel Threaded NPT Male | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 × 1/2 | 1/2" | 15/16" | 2 5/8" | 350 psi @ 72° F | 1 to 100 | 00000000 | ||||||||||
| 3/4 × 3/4 | 3/4" | 1 1/4" | 4 1/8" | 350 psi @ 72° F | 1 to 100 | 00000000 | ||||||||||
| 1 × 1 | 1" | 1 9/16" | 5 3/4" | 450 psi @ 72° F | 1 to 100 | 00000000 | ||||||||||
| 1 1/2 × 1 1/2 | 1 1/2" | 2 1/8" | 10 1/2" | 350 psi @ 72° F | 1 to 100 | 00000000 | ||||||||||
| 2 × 2 | 2" | 2 11/16" | 13" | 300 psi @ 72° F | 1 to 100 | 00000000 | ||||||||||
Chemical Hose Nozzles
Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.
Style B has a trigger to turn flow on and off. It has an angled design, which reduces hose kinking for efficient fueling. Nozzle has a barbed connection; twist hose onto the barbed end and secure with a clamp. Use to transfer citric acid, nitric acid, phosphoric acid, and sodium hydroxide from pumps and processing equipment.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | For Hose ID | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Each | |
For Use With Citric Acid, Nitric Acid, Phosphoric Acid, and Sodium Hydroxide | |||||||||||
| B | 40 | 1/2" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 0000000 |
| B | 40 | 3/4" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| B | 40 | 1" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
Plastic Push-to-Connect Tube Fittings for Chemicals
- For Use With: Inch: Acetic Acid, Alcohol, Arsenic Acid, Benzoic Acid, Fluoboric Acid, Hydrochloric Acid, Nitric Acid, Sodium Carbonate, Sulfuric Acid
Metric: Acetic Acid, Alcohol, Arsenic Acid, Benzoic Acid, Fluoboric Acid, Sodium Carbonate, Sulfuric Acid - Temperature Range: Inch: 0° to 270° F
Metric: 32° to 175° F - Tubing: Use with hard (Durometer 55D-60D) FEP plastic
Also known as instant fittings, these chemical-resistant plastic fittings connect to tubing with a push, and an internal gripping ring and fluoroelastomer O-ring hold the tubing tight. To disconnect, push on the release ring and pull the tubing out of the fitting.
PVDF fittings offer excellent chemical resistance, and can be used with hydrochloric acid and nitric acid. They withstand temperatures up to 270° F, higher than other push-to-connect fittings for chemicals. They are produced in a clean room and are bagged individually to prevent dirt and moisture from contaminating the inside. PVDF is also known as Kynar.
For technical drawings and 3-D models, click on a part number.
Fittings with tube stem insert into the push-to-connect end of another fitting in place of a length of tubing.
Fittings with tube stem insert into the push-to-connect end of another fitting in place of a length of tubing.
Right-Angle Flow Rectangular Manifolds
Distribute air or fluid to multiple locations from a single supply source with these manifolds. They are also known as headers. They have mounting holes, so you can mount from the top or side.
PTFE manifolds have the best chemical and corrosion resistance of all the plastic and metal manifolds we offer, so they’re the best choice for acids and other highly corrosive substances. Do not use with deonized water at temperatures above 120° F.
Use a plug (sold separately) to close off any unused inlets and outlets.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetic Acid, Acetone, Bleach, Deionized Water, Hydrochloric Acid, Nitric Acid, Phosphoric Acid, Sulfuric Acid
- Temperature Range: -20° to 180° F
- Maximum Pressure: 120 psi @ 72° F
| No. of Outlets | Inlet Pipe Size | Outlet Pipe Size | Lg. | Wd. | Ht. | Outlet Ctr.-to-Ctr. | Color | Each | |
Outlets on One Side—Standard Outlet Spacing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2 | 1/4 | 1/8 | 1 3/4" | 1" | 1" | 3/4" | White | 0000000 | 000000 |
| 2 | 3/8 | 1/4 | 2 3/8" | 1 1/4" | 1 1/4" | 7/8" | White | 0000000 | 00000 |
| 2 | 1/2 | 3/8 | 2 3/4" | 1 1/2" | 1 1/2" | 1" | White | 0000000 | 00000 |
| 4 | 1/4 | 1/8 | 3 1/4" | 1" | 1" | 3/4" | White | 0000000 | 00000 |
| 4 | 3/8 | 1/4 | 4 1/8" | 1 1/4" | 1 1/4" | 7/8" | White | 0000000 | 00000 |
| 4 | 1/2 | 3/8 | 4 3/4" | 1 1/2" | 1 1/2" | 1" | White | 0000000 | 000000 |