How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Cleaned and Bagged Metal Barbed Hose Fittings for Chemicals
Each of these metal fittings is double bagged to prevent contamination in areas that require a high level of cleanliness. They’re even clean enough to be used for oxygen service. Constructed from 316 stainless steel, they won’t corrode from repeat cleanings with harsh chemicals. They’re also called hose nipples. To connect them, slide the barbed end into plastic or rubber hose and secure it with a clamp.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetone, Butyl Alcohol, Citric Acid, Ethanol, Ethylene Glycol, Isopropyl Alcohol, Mineral Oil, Phosphoric Acid, Sodium Hydroxide
- Maximum Pressure: 400 psi @ 72° F
- Temperature Range: -100° to 450° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps, or Band-and-Buckle Clamps
| For Hose ID | Pipe Size | Each | |
316 Stainless Steel | |||
|---|---|---|---|
| 1/8" | 1/8 | 0000000 | 000000 |
| 1/8" | 1/4 | 0000000 | 00000 |
| 1/4" | 1/4 | 0000000 | 00000 |
| 1/4" | 3/8 | 0000000 | 00000 |
| 3/8" | 1/4 | 0000000 | 00000 |
| 3/8" | 3/8 | 0000000 | 00000 |
| 3/8" | 1/2 | 0000000 | 00000 |
| 1/2" | 1/4 | 0000000 | 00000 |
| 1/2" | 3/8 | 0000000 | 00000 |
| 1/2" | 1/2 | 0000000 | 00000 |
| 1/2" | 3/4 | 0000000 | 00000 |
| 5/8" | 1/2 | 0000000 | 00000 |
| 3/4" | 1/2 | 0000000 | 00000 |
| 3/4" | 3/4 | 0000000 | 00000 |
| 1" | 3/4 | 0000000 | 00000 |
| 1" | 1 | 0000000 | 000000 |
Easy-Fit Barbed Hose Fittings for Chemicals
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into rubber hose and secure with a clamp. Fittings are 316 stainless steel, which has excellent corrosion resistance to withstand a variety of chemicals.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end. Adapters with a hex body can be tightened with a wrench.
Connectors are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetone, Isopropyl Alcohol, Mineral Oil, Sodium Hydroxide
- Maximum Pressure: See table
- Maximum Vacuum: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 200° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: ASME B1.20.1, ASTM A312
| For Hose ID | Pipe Size | Body Shape | Max. Pressure | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 1/2" | 1/2 | Round | 200 psi @ 72° F | 0000000 | 000000 |
| 3/4" | 1/2 | Round | 175 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 3/4 | Hex | 175 psi @ 72° F | 0000000 | 00000 |
| 3/4" | 1 | Round | 175 psi @ 72° F | 0000000 | 00000 |
| 1" | 3/4 | Round | 150 psi @ 72° F | 0000000 | 00000 |
| 1" | 1 | Hex | 150 psi @ 72° F | 0000000 | 00000 |
| 1" | 1 1/4 | Round | 150 psi @ 72° F | 0000000 | 00000 |
| 1 1/4" | 1 | Round | 140 psi @ 72° F | 0000000 | 00000 |
| 1 1/4" | 1 1/4 | Hex | 140 psi @ 72° F | 0000000 | 00000 |
| 1 1/4" | 1 1/2 | Round | 140 psi @ 72° F | 0000000 | 00000 |
| 1 1/2" | 1 | Round | 130 psi @ 72° F | 0000000 | 00000 |
| 1 1/2" | 1 1/4 | Round | 130 psi @ 72° F | 0000000 | 00000 |
| 1 1/2" | 1 1/2 | Hex | 130 psi @ 72° F | 0000000 | 00000 |
| 1 1/2" | 2 | Round | 130 psi @ 72° F | 0000000 | 000000 |
| 2" | 1 1/4 | Round | 110 psi @ 72° F | 0000000 | 000000 |
| 2" | 1 1/2 | Round | 110 psi @ 72° F | 0000000 | 000000 |
| 2" | 2 | Round | 110 psi @ 72° F | 0000000 | 00000 |
| 2" | 2 1/2 | Round | 110 psi @ 72° F | 0000000 | 000000 |
| 2 1/2" | 2 | Round | 70 psi @ 72° F | 0000000 | 000000 |
| 2 1/2" | 2 1/2 | Round | 70 psi @ 72° F | 0000000 | 00000 |
| 3" | 3 | Round | 50 psi @ 72° F | 0000000 | 000000 |
| 4" | 4 | Round | 50 psi @ 72° F | 0000000 | 000000 |
| 5" | 5 | Round | 45 psi @ 72° F | 0000000 | 000000 |
| 6" | 6 | Round | 25 psi @ 72° F | 0000000 | 000000 |
| 8" | 8 | Round | 25 psi @ 72° F | 0000000 | 000000 |
- For Use With: Acetone, Isopropyl Alcohol, Mineral Oil, Sodium Hydroxide
- Maximum Pressure: See table
- Maximum Vacuum: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 400° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: ASTM A312
| For Hose ID | Pipe Size | Body Shape | Max. Pressure | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 1" | 1 | Round | 100 psi @ 72° F | 0000000 | 000000 |
| 1 1/4" | 1 1/4 | Round | 75 psi @ 72° F | 0000000 | 00000 |
| 1 1/2" | 1 1/2 | Round | 75 psi @ 72° F | 0000000 | 00000 |
| 2" | 2 | Round | 75 psi @ 72° F | 0000000 | 00000 |
| 2 1/2" | 2 1/2 | Round | 50 psi @ 72° F | 0000000 | 000000 |
| 3" | 3 | Round | 50 psi @ 72° F | 0000000 | 000000 |
| 4" | 4 | Round | 50 psi @ 72° F | 0000000 | 000000 |
| 6" | 6 | Round | 25 psi @ 72° F | 0000000 | 000000 |
- For Use With: Acetone, Isopropyl Alcohol, Mineral Oil, Sodium Hydroxide
- Maximum Pressure: 125 psi @ 72° F
- Maximum Vacuum: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 200° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: ASTM A312
Chemical Hose Nozzles
Adjust the flow while dispensing liquid chemicals. Nozzles are polypropylene, which is lightweight with excellent chemical resistance. They shut off manually.
Style B has a trigger to turn flow on and off. It has an angled design, which reduces hose kinking for efficient fueling. Nozzle has a barbed connection; twist hose onto the barbed end and secure with a clamp. Use to transfer citric acid, nitric acid, phosphoric acid, and sodium hydroxide from pumps and processing equipment.
Warning: Do not leave nozzles unattended when in use.
For technical drawings and 3-D models, click on a part number.
Spout | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Max. Flow Rate, gpm | For Hose ID | Connection | Max. Pressure | Temperature Range, °F | OD | Lg. | Material | Shut-Off Type | Each | |
For Use With Citric Acid, Nitric Acid, Phosphoric Acid, and Sodium Hydroxide | |||||||||||
| B | 40 | 1/2" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 0000000 |
| B | 40 | 3/4" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
| B | 40 | 1" | Barbed Male | 150 psi @ 72° F | 32° to 105° | 31/32" | 4 1/2" | Polypropylene Plastic | Manual | 00000000 | 000000 |
Easy-Access UV-Resistant Polypropylene Pipe Fittings for Chemicals
- For Use With:
Fittings: Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Sodium Hydroxide, Sulfuric Acid (30%), Water
Gaskets: See Gaskets - Temperature Range:
Fittings: 0° to 150° F
Gaskets: See Gaskets
Also known as manifold flange fittings, these have a clamp-together design that lets you access your line for routine maintenance. Connect the flanged end to another quick-clamp fitting with a clamp and a gasket (all sold separately). Fittings are polypropylene, which resists a wide variety of acids, solvents, and other harsh chemicals. The fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light, so they’re suitable for outdoor use.
Warning: Never use plastic pipe fittings and pipe with compressed air or gas.
Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.
Fittings with a barbed end slide into hose and secure with a bolt clamp.
| Pipe Size | Flange OD | For Hose ID | Material | Color | Max. Pressure | Each | |
| 2 | 3 9/32" | 1 1/2" | Polypropylene Plastic | Black | 300 psi @ 72° F | 0000000 | 00000 |
| 2 | 3 19/64" | 1" | Polypropylene Plastic | Black | 300 psi @ 72° F | 0000000 | 0000 |
| 2 | 3 19/64" | 2" | Polypropylene Plastic | Black | 300 psi @ 72° F | 0000000 | 0000 |
| 3 | 4 13/32" | 2" | Polypropylene Plastic | Black | 125 psi @ 72° F | 0000000 | 00000 |
| 3 | 4 13/32" | 3" | Polypropylene Plastic | Black | 200 psi @ 72° F | 0000000 | 00000 |
| For Pipe Size | For Flange OD | OD | ID | Thick. | Color | Temp. Range, ° F | For Use With | Each | |
EPDM Rubber | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2 | 3 19/64" | 2 5/8" | 2.188" | 1/4" | Black | 0° to 300° | Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Water | 0000000 | 00000 |
| 3 | 4 13/32" | 3.719" | 3.188" | 1/4" | Black | 0° to 300° | Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Water | 0000000 | 0000 |
Viton® Fluoroelastomer Rubber | |||||||||
| 2 | 3 19/64" | 2 5/8" | 2" | 1/4" | Black | 0° to 400° | Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Sulfuric Acid (30%), Water | 0000000 | 00000 |
| 3 | 4 13/32" | 3.719" | 3" | 1/4" | Black | 0° to 400° | Acetic Acid (5%), Calcium Chloride, Hydrochloric Acid (10%), Phosphoric Acid (85%), Salt Water, Sulfuric Acid (30%), Water | 0000000 | 00000 |