How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Easy-Fit Barbed Hose Fittings for Air and Water
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into rubber hose and secure with a clamp.
Steel fittings are stronger and more durable than other metal fittings. They should be used in noncorrosive environments. Zinc-plated steel fittings have slightly better corrosion resistance than unplated steel fittings. Fittings with a threaded end are also known as hose nipples.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 125 psi @ 72° F, except For 5" to 8" Hose IDs: 100 psi @ 72° F
- Maximum Vacuum: For 1/2" to 4" Hose IDs: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 200° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: See table
Metal Cam-and-Groove Hose Couplings for Water
A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
| Coupling Size | Plug OD | For Hose ID | Max. Pressure | Each | |
Anodized Aluminum | |||||
|---|---|---|---|---|---|
| 5 | 5 3/4" | 5" | 75 psi @ 72° F | 00000000 | 0000000 |
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.
Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.
Aluminum plugs and sockets are lighter in weight than 316 stainless steel plugs and sockets. They have good corrosion resistance. 316 stainless steel plugs and sockets have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Brass Replacement Levers | 300 Series Stainless Steel Replacement Levers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Socket ID | For Hose ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Aluminum with Brass Levers | ||||||||||||||
| 5 | 5 3/4" | 5" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 0000000 | 5 | 0000000 | 000000 | 000000000 | 000000 | 000000 | 00 |
Aluminum with 316 Stainless Steel Levers | ||||||||||||||
| 5 | 5 3/4" | 5" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000 | 000000 | 5 | 0000000 | 00000 | 000000 | 00 | 000000000 | 000000 |
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Attachment Type: Use Band-and-Buckle Clamps
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326
Sockets | Replacement Gaskets | Replacement Levers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Socket ID | For Hose ID | No. of Levers | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Aluminum with Brass Levers | ||||||||||||
| 5 | 5 3/4" | 5" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 000000000 | 0000000 | 5 | 0000000 | 000000 | 000000000 | 00000 |
Aluminum with 316 Stainless Steel Levers | ||||||||||||
| 5 | 5 3/4" | 5" | 2 | Zinc-Plated Steel | 75 psi @ 72° F | 0000000 | 000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
Easy-Fit Barbed Hose Fittings for Chemicals
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into rubber hose and secure with a clamp. Fittings are 316 stainless steel, which has excellent corrosion resistance to withstand a variety of chemicals.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetone, Isopropyl Alcohol, Mineral Oil, Sodium Hydroxide
- Maximum Pressure: See table
- Maximum Vacuum: 26 in. of Hg @ 72° F
- Temperature Range: -20° to 200° F
- Attachment Type: Use Worm-Drive Clamps, Bolt Clamps or Band-and-Buckle Clamps
- Specifications Met: ASME B1.20.1, ASTM A312
| For Hose ID | Pipe Size  | Body Shape | Max. Pressure | Each | |
316 Stainless Steel | |||||
|---|---|---|---|---|---|
| 5" | 5 | Round | 45 psi @ 72° F | 0000000 | 0000000 |