How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Fittings that swivel until tightened rotate 360° for easy installation. Fittings with a threaded end are also known as hose nipples.
NPSH (National Pipe Straight Hose) female threads are compatible with male NPT, NPTF, and NPSM threads.
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: SAE J476
| For Hose ID | Pipe Size  | Pkg. Qty. | Pkg. | |
Brass | ||||
|---|---|---|---|---|
| 1" | 1 | 1 | 0000000 | 000000 |
UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: 150 psi @ 72° F
- Temperature Range: -40° to 160° F
- Attachment Type: Use Band-and-Buckle Clamps
- Specifications Met: SAE J476
| For Hose ID | Pipe Size | Gasket Material | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 1" | 1 | SBR Rubber | 1 | 0000000 | 000000 |
Metal Garden Hose Fittings for Drinking Water
These fittings meet NSF/ANSI Standard 61 for drinking water. Connect them to rubber or plastic garden hose for a variety of water supply applications. Fittings are brass for good corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a barbed end are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. To connect, slide the barbed end into rubber or plastic hose and secure with a clamp.
- Maximum Pressure: 150 psi @ 72° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
| For Hose ID | Pipe Size | Each | |
Brass | |||
|---|---|---|---|
| 1" | 1 | 0000000 | 000000 |
- Maximum Pressure: 150 psi @ 72° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
| For Hose ID | Pipe Size | Washer Material | Each | |
Brass | ||||
|---|---|---|---|---|
| 1" | 1 | EPDM Rubber | 0000000 | 000000 |