How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Chemical-Resistant PVDF Hose Fittings for Food and Beverage
- Maximum Pressure: 205 psi @ 72° F
- Temperature Range: 0° to 245° F
- Attachment Type: Use Worm-Drive Clamps or Bolt Clamps
- Specifications Met: NSF/ANSI 61, UL 94 V-0
To stand up to the harsh chemicals used to clean food-processing lines, these fittings are made of PVDF (polyvinylidene fluoride), also known as Kynar. They’ll resist degrading when exposed to strong alkali and highly acidic solutions, unlike other plastic fittings, such as those made from nylon and acetal. They are NSF/ANSI 61 certified for use in drinking water systems, and they won't impart any tastes or odors. Use them with both hot and cold substances. Since they're made of PVDF, these fittings can stand up to impact. Rated UL 94 V-0, they meet strict flammability standards.
Warning: Never use plastic hose fittings and pipe with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
| For Hose ID | Pipe Size | Color | Each | |
PVDF Plastic | ||||
|---|---|---|---|---|
| 1/4" | 1/4 | White | 0000000 | 00000 |
| 1/4" | 1/2 | White | 0000000 | 0000 |
| 3/8" | 1/4 | White | 0000000 | 0000 |
| 3/8" | 3/8 | White | 0000000 | 0000 |
| 3/8" | 1/2 | White | 0000000 | 0000 |
| 1/2" | 1/4 | White | 0000000 | 0000 |
| 1/2" | 3/8 | White | 0000000 | 0000 |
| 1/2" | 1/2 | White | 0000000 | 0000 |
| 1/2" | 3/4 | White | 0000000 | 0000 |
| 5/8" | 1/2 | White | 0000000 | 0000 |
| 5/8" | 3/4 | White | 0000000 | 0000 |
| 3/4" | 1/2 | White | 0000000 | 0000 |
| 3/4" | 3/4 | White | 0000000 | 0000 |
Coolant Hose for Electronics
- Temperature Range: -40° to 280° F
- Material: Peroxide-Cured EPDM Rubber
- Color: Black, Blue, or Red
- Compatible Hose Fittings: Minimal-Spill Quick-Disconnect Hose Couplings for Coolant
Blue for cold and red for hot—this hose is color coded so you won’t mix up your coolant supply lines. It’s also available in black. Use it in data centers to connect servers to a cooling manifold. Made of peroxide-cured EPDM, it withstands temperatures up to 280° F. The cover meets UL 94 V-0 for flame retardance.
When used below 70 psi, you don’t need a hose clamp to attach a coupling to this hose. The more you pull on the coupling, the tighter the hose will grip. For higher pressures, use a hose clamp.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Bend Radius | Max. Pressure | Specifications Met | Choose a Color | Lengths, ft. | Application | Per Ft. | |
| 1/4" | 9/16" | 2" | 230 psi @ 72° F | UL 94 V-0 | Electronics | 00000000 | 00000 | ||
| 3/8" | 3/4" | 2 1/2" | 230 psi @ 72° F | UL 94 V-0 | Electronics | 00000000 | 0000 | ||
| 1/2" | 7/8" | 3" | 230 psi @ 72° F | UL 94 V-0 | Electronics | 00000000 | 0000 | ||
| 5/8" | 1" | 4" | 230 psi @ 72° F | UL 94 V-0 | Electronics | 00000000 | 0000 | ||
| 1" | 1 7/16" | 6" | 230 psi @ 72° F | UL 94 V-0 | Electronics | 00000000 | 0000 |
High-Purity PVDF Pipe Fittings for Corrosive Chemicals
Made of PVDF that’s finished to a 12 Ra smoothness, these fittings handle some of the harshest chemicals without leaching contaminants into your line. They won’t accumulate particles and are easy to clean, thanks to their smoothness. Comparable to Kynar, these fittings handle most organic solvents that would dissolve CPVC, and chlorine or nitric acid that would weaken polypropylene. You can use them at higher temperatures than CPVC and polypropylene. These fittings meet UL 94 V-0 and FM standards for flame retardance. They’re also FDA compliant for direct contact with food, and they meet ASTM requirements for dimensions and tolerances.
Connect them to pipe with socket fusion welding for a strong, permanent bond. Use a socket fusion tool with a heater bushing (sold separately) that matches your pipe size.
For technical drawings and 3-D models, click on a part number.
- For Use With: Chlorine, Deionized Water, Hydrochloric Acid, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Temperature Range: -40° to 270° F
- Specifications Met: ASTM D3261, FDA Compliant 21 CFR 177.2510, FM 4910, UL 94 V-0
- Pipe Nipples and Pipe: Use SDR 21 PVDF Plastic
- Flanges: Use PVDF Plastic
Threaded fittings can be disconnected as needed for maintenance and repair. To prevent leaks and cracks, apply thread sealant tape (sold separately) to the male threads, and don’t overtighten them. First tighten by hand, then use a wrench to tighten one or two more turns.
| Pipe Size | Socket Dp. | Material | Color | Max. Pressure | Each | |
NPT Threads | ||||||
|---|---|---|---|---|---|---|
| 1/2 | 37/64" | PVDF Plastic | White | 230 psi @ 72° F | 0000000 | 000000 |
| 3/4 | 5/8" | PVDF Plastic | White | 230 psi @ 72° F | 0000000 | 00000 |
| 1 | 45/64" | PVDF Plastic | White | 230 psi @ 72° F | 0000000 | 00000 |
| 1 1/2 | 59/64" | PVDF Plastic | White | 230 psi @ 72° F | 0000000 | 000000 |
| 2 | 1 5/64" | PVDF Plastic | White | 230 psi @ 72° F | 0000000 | 000000 |
- For Use With: Chlorine, Deionized Water, Hydrochloric Acid, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Temperature Range: -40° to 270° F
- Specifications Met: ASTM D3261, FDA Compliant 21 CFR 177.2510, FM 4910, UL 94 V-0
- Pipe Nipples and Pipe: Use SDR 21 PVDF Plastic
- Flanges: Use PVDF Plastic
Threaded fittings can be disconnected as needed for maintenance and repair. To prevent leaks and cracks, apply thread sealant tape (sold separately) to the male threads, and don’t overtighten them. First tighten by hand, then use a wrench to tighten one or two more turns.
- For Use With: Chlorine, Deionized Water, Hydrochloric Acid, Nitric Acid, Oil, Phosphoric Acid, Salt Water, Solvents
- Temperature Range: -40° to 270° F
- Specifications Met: ASTM D3222, FDA Compliant 21 CFR 177.2510, FM 4910, UL 94 V-0
- Seal Material: Viton® Fluoroelastomer Rubber
- Seat Material: PTFE Plastic
Add a ball valve to control the flow in your line.
| Pipe Size | Flow Coefficient (Cv) | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | Color | Max. Pressure | Each | |
PVDF Plastic | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/2 | 12.5 | 29.92 | Full | 3 13/16" | White | 230 psi @ 72° F | 0000000 | 0000000 |
| 3/4 | 28 | 29.92 | Full | 4 9/32" | White | 230 psi @ 72° F | 0000000 | 000000 |
| 1 | 50.9 | 29.92 | Full | 4 23/32" | White | 230 psi @ 72° F | 0000000 | 000000 |
| 1 1/2 | 150 | 29.92 | Full | 6 1/16" | White | 230 psi @ 72° F | 0000000 | 00000000 |
| 2 | 230 | 29.92 | Full | 6 13/16" | White | 230 psi @ 72° F | 0000000 | 00000000 |
| Includes | Each | |
| 5 Bushing Sets (1 each in 1/2, 3/4, 1, 1 1/2, and 2 Pipe Sizes) | 00000000 | 0000000 |
- Temperature Range: -450° to 550° F
- Specifications Met: FDA Compliant 21 CFR 177.1550, MIL-T-27730, UL Listed
Max. Pressure, psi | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Max. Thread Dia. | Wd. | Lg., yd. | Density, g/cm3 | Color | For Fluids | For Gases | 1-11 | 12-Up | |
PTFE | |||||||||
0.0032" Thick. | |||||||||
| 1/2" | 1/4" | 14 | 0.7 | White | 10,000 | 10,000 | 0000000 | 00000 | 00000 |
| 3/4" | 3/8" | 14 | 0.7 | White | 10,000 | 10,000 | 0000000 | 0000 | 0000 |
| 1" | 1/2" | 14 | 0.7 | White | 10,000 | 10,000 | 0000000 | 0000 | 0000 |
| 1 1/2" | 3/4" | 14 | 0.7 | White | 10,000 | 10,000 | 0000000 | 0000 | 0000 |
| 2" | 1" | 14 | 0.7 | White | 10,000 | 10,000 | 0000000 | 0000 | 0000 |