How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Lubrication Hose Fittings
Use these two-piece fittings in grease and lubrication lines. They screw directly onto plastic hose without the need for a separate adapter. To install, separate the two pieces of the fitting (the hose-end portion and the nipple portion). Screw the hose-end portion of the fitting onto the hose, then thread the nipple portion of the fitting into the hose-end portion. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose. Fittings are zinc-plated steel, which is strong and durable with fair corrosion resistance.
Fittings with intermittent swivel rotate 360° until tightened for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
NPTF (Dryseal) threads are compatible with NPT threads.
- Maximum Pressure: 3,000 psi @ 72° F
- Temperature Range: -40° to 120° F
- For Hose Manufacturer Series: Parker HLB
- Specifications Met: SAE J514
Lubrication Hose
- Temperature Range: -40° to 212° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Nylon Plastic with Polyurethane Cover
- Color: Black
- Compatible Hose Fittings: Parker Series BU
Hose has good oil-resistance, so it won’t deteriorate or become brittle when exposed to grease and lubricants. Hose has a smooth interior for unrestricted flow. It is reinforced with yarn for good strength. Hose is nylon plastic with a polyurethane rubber cover for good abrasion and tear resistance. The material won’t degrade when exposed to ozone or UV light.
Nickel-Plated Brass Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Lubricants, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -75° to 550° F, except 90° elbow adapters with BSPP threads are 0° to 170° F
- Tubing: Use with copper
- Specifications Met: DIN 3861, except nuts meet DIN 3870
With a nickel-plated finish, these compression fittings resist corrosion better than plain brass fittings. They have a single sleeve (ferrule) made of plain brass that gently bites into copper tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. These fittings are also known as flareless fittings. All meet DIN standards for tube fitting dimensions.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
BSPT Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 0000000 | 00000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 3/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 10 | 1 | 1/4 | Nickel-Plated Brass | 1,600 psi @ 72° F | 0000000 | 0000 |
| 10 | 1 | 3/8 | Nickel-Plated Brass | 1,600 psi @ 72° F | 0000000 | 0000 |
| 12 | 1 | 3/8 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 12 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 14 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 15 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 16 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
| 18 | 1 | 1/2 | Nickel-Plated Brass | 900 psi @ 72° F | 00000000 | 00000 |
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
BSPP Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 3/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 10 | 1 | 1/4 | Nickel-Plated Brass | 1,600 psi @ 72° F | 00000000 | 0000 |
| 15 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 00000000 | 0000 |
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Material | Maximum Pressure | Each | |
| 4 | 1 | Nickel-Plated Brass | 1,800 psi @ 72° F | 0000000 | 00000 |
| 6 | 1 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 10 | 1 | Nickel-Plated Brass | 1,600 psi @ 72° F | 0000000 | 0000 |
| 12 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
| 14 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
| 15 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 00000 |
Adapter, Tube × Male
Threaded Pipe (BSPP)
Adapter, Tube × Male
Threaded Pipe (BSPT)
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Pipe Size | Material | Maximum Pressure | Each | |
BSPP Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 1/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 00000000 | 0000 |
| 10 | 1 | 1/4 | Nickel-Plated Brass | 1,600 psi @ 72° F | 00000000 | 0000 |
| 12 | 1 | 3/8 | Nickel-Plated Brass | 1,000 psi @ 72° F | 00000000 | 00000 |
BSPT Threads | ||||||
| 4 | 1 | 1/8 | Nickel-Plated Brass | 1,800 psi @ 72° F | 0000000 | 0000 |
| 6 | 1 | 1/8 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 6 | 1 | 1/4 | Nickel-Plated Brass | 2,500 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/8 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 8 | 1 | 1/4 | Nickel-Plated Brass | 2,100 psi @ 72° F | 0000000 | 0000 |
| 14 | 1 | 1/2 | Nickel-Plated Brass | 1,000 psi @ 72° F | 0000000 | 0000 |
Inline tees are also known as branch tees.
Right-angle tees are also known as run tees.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Maximum Pressure | Length, mm | Each | |
Short Nuts | ||||||
| 4 | 1 | Nickel-Plated Brass | 1,800 psi @ 72° F | 11 | 00000000 | 00000 |
| 6 | 1 | Nickel-Plated Brass | 2,500 psi @ 72° F | 12 | 00000000 | 000 |
| 8 | 1 | Nickel-Plated Brass | 2,100 psi @ 72° F | 12 | 00000000 | 000 |
| 10 | 1 | Nickel-Plated Brass | 1,600 psi @ 72° F | 16 | 00000000 | 0000 |
| 12 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 16 | 00000000 | 0000 |
| 14 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 19 | 00000000 | 0000 |
| 15 | 1 | Nickel-Plated Brass | 1,000 psi @ 72° F | 17 | 00000000 | 0000 |
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Sleeve Material | Maximum Pressure | Each | |
| 4 | 1 | Brass | 1,800 psi @ 72° F | 00000000 | 00000 |
| 6 | 1 | Brass | 2,500 psi @ 72° F | 00000000 | 000 |
| 8 | 1 | Brass | 2,100 psi @ 72° F | 00000000 | 000 |
| 10 | 1 | Brass | 1,600 psi @ 72° F | 00000000 | 000 |
| 12 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
| 14 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
| 15 | 1 | Brass | 1,000 psi @ 72° F | 00000000 | 000 |
Vibration-Resistant Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Lubricants, Mineral Oil, Water
- Temperature Range: -30° to 270° F, except fluoroelastomer sleeves are -15° to 450° F
- Tubing: Use with copper
The sleeve (ferrule) in these fittings is rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal. The sleeve aligns the tubing during installation. Fittings come with a nut and a sleeve. They are also known as flareless fittings. They are brass for good corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
| For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPTF Threads | |||||
|---|---|---|---|---|---|
| 3/16" | 1/8 | Brass | 300 psi @ 72° F | 00000000 | 000000 |
| 1/4" | 1/8 | Brass | 300 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 1/4 | Brass | 300 psi @ 72° F | 00000000 | 00000 |
| 5/16" | 1/4 | Brass | 220 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/8 | Brass | 170 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/4 | Brass | 170 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 3/8 | Brass | 170 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 3/8 | Brass | 100 psi @ 72° F | 00000000 | 00000 |
| For Tube OD | Pipe Size | Material | Max. Pressure | Each | |
NPTF Threads | |||||
|---|---|---|---|---|---|
| 3/16" | 1/8 | Brass | 300 psi @ 72° F | 00000000 | 000000 |
| 1/4" | 1/8 | Brass | 300 psi @ 72° F | 00000000 | 00000 |
| 1/4" | 1/4 | Brass | 300 psi @ 72° F | 00000000 | 00000 |
| 5/16" | 1/4 | Brass | 220 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/8 | Brass | 170 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 1/4 | Brass | 170 psi @ 72° F | 00000000 | 00000 |
| 3/8" | 3/8 | Brass | 170 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 3/8 | Brass | 100 psi @ 72° F | 00000000 | 00000 |
| 1/2" | 1/2 | Brass | 100 psi @ 72° F | 00000000 | 00000 |
| For Tube OD | Sleeve Color | Max. Pressure | Each | |
Buna-N Rubber | ||||
|---|---|---|---|---|
| 3/16" | Black with Green Stripe | 300 psi @ 72° F | 00000000 | 00000 |
| 1/4" | Black with Green Stripe | 300 psi @ 72° F | 00000000 | 0000 |
| 5/16" | Black with Green Stripe | 220 psi @ 72° F | 00000000 | 0000 |
| 3/8" | Black with Green Stripe | 170 psi @ 72° F | 00000000 | 0000 |
| 1/2" | Black with Green Stripe | 100 psi @ 72° F | 00000000 | 0000 |
Fluoroelastomer Rubber | ||||
| 3/16" | Black with Red Stripe | 300 psi @ 72° F | 00000000 | 00000 |
| 1/4" | Black with Red Stripe | 300 psi @ 72° F | 00000000 | 0000 |
| 5/16" | Black with Red Stripe | 220 psi @ 72° F | 00000000 | 0000 |
| 3/8" | Black with Red Stripe | 170 psi @ 72° F | 00000000 | 0000 |
| 1/2" | Black with Red Stripe | 100 psi @ 72° F | 00000000 | 00000 |