How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Metal Cam-and-Groove Hose Couplings for Water
A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.
Plugs with flanged end are also known as PFA adapters. Bolt the flanged end to another same-size flange with a gasket (sold separately).
Aluminum couplings are lighter in weight than brass plugs and sockets. They have good abrasion and corrosion resistance. Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Specifications Met: ASME B16.5, Fed. Spec. A-A-59326
- Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings
Bolt Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | Pipe Size  | Flange OD | Flanged Connection Surface | Pressure Class | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
Anodized Aluminum | ||||||||||||
| 2 | 2 1/2" | 2 | 6" | Flat | 150 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 00000000 | 0000000 |
| 3 | 3 5/8" | 3 | 7 1/2" | Flat | 150 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 00000000 | 000000 |
| 4 | 4 3/4" | 4 | 9" | Flat | 150 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 00000000 | 000000 |
| 6 | 6 15/16" | 6 | 11" | Flat | 150 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 00000000 | 000000 |
Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum
Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.
Plugs with flanged end are also known as PFA adapters. Bolt the flanged end to another same-size flange with a gasket (sold separately).
Sockets with flanged end are also known as PFC couplers. Bolt the flanged end to another same-size flange with a gasket (sold separately).
316 stainless steel plugs and sockets have excellent corrosion resistance.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met:
Aluminum: ASME B16.24, Fed. Spec. A-A-59326
316 Stainless Steel: ASME B16.5, Fed. Spec. A-A-59326
Bolt Hole | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Coupling Size | Plug OD | Pipe Size | Dash Size | Flange OD | Flanged Connection Surface | Pressure Class | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
316 Stainless Steel | |||||||||||||
| 2 | 2 1/2" | 2 | 32 | 6" | Raised | 150 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 000000000 | 0000000 |
| 3 | 3 5/8" | 3 | 48 | 7 1/2" | Raised | 150 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 000000000 | 000000 |
| 4 | 4 3/4" | 4 | 64 | 9" | Raised | 150 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 000000000 | 000000 |
| 6 | 6 15/16" | 6 | 96 | 11" | Flat | 150 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 000000000 | 000000 |
- For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
- Maximum Pressure: See table
- Temperature Range: -65° to 250° F
- Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
- Specifications Met:
Aluminum: ASME B16.24, Fed. Spec. A-A-59326
316 Stainless Steel: ASME B16.5, Fed. Spec. A-A-59326
Sockets | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bolt Hole | Replacement Gaskets | Replacement Levers | ||||||||||||||||
| Coupling Size | Socket ID | Pipe Size | Dash Size | Flange OD | Pressure Class | No. of Levers | Max. Pressure | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | Pkg. Qty. | Pkg. | Each | |||
316 Stainless Steel with 316 Stainless Steel Levers and 304 Stainless Steel Pull Rings | ||||||||||||||||||
Raised Flanged Connection Surface | ||||||||||||||||||
| 2 | 2 1/2" | 2 | 32 | 6" | 150 | 2 | 250 psi @ 72° F | 5/8" | 3/4" | 4 | 4 3/4" | 000000000 | 0000000 | 10 | 0000000 | 00000 | 000000000 | 000000 |
| 3 | 3 5/8" | 3 | 48 | 7 1/2" | 150 | 2 | 200 psi @ 72° F | 5/8" | 3/4" | 4 | 6" | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
| 4 | 4 3/4" | 4 | 64 | 9" | 150 | 2 | 150 psi @ 72° F | 5/8" | 3/4" | 8 | 7 1/2" | 000000000 | 000000 | 10 | 0000000 | 00000 | 000000000 | 00000 |
| 6 | 6 15/16" | 6 | 96 | 11" | 150 | 2 | 75 psi @ 72° F | 3/4" | 7/8" | 8 | 9 1/2" | 000000000 | 00000000 | 5 | 0000000 | 00000 | 000000000 | 00000 |
Yor-Lok Fittings for Stainless Steel Tubing
A nut with two sleeves (ferrules) gives these fittings extra gripping power. The sleeves bite into tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.
316 stainless steel fittings have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil, Natural Gas, Steam, Water
- Tubing: Use with welded or seamless 304/304L or 316/316L stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
Fittings with flange end connect to another same-size flange with a gasket (sold separately) to create an access point in your line. They are also known as Pressure Class 150 flanges.
For Tube | Bolt Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Pipe Size | Flange OD | Material | Max. Pressure | Temp. Range, °F | Bolt Circle Dia. | Dia. | No. of | Bolts Included | Specifications Met | Each | |
| 1/2" | 0.035" | 1/2 | 3 1/2" | 316 Stainless Steel | 250 psi @ 72° F | -420° to 1200° | 2 3/8" | 5/8" | 4 | No | ASME B16.5 | 00000000 | 0000000 |
| 1/2" | 0.035" | 1 | 4 1/4" | 316 Stainless Steel | 250 psi @ 72° F | -420° to 1200° | 3 1/8" | 5/8" | 4 | No | ASME B16.5 | 00000000 | 000000 |
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Temp. Range, °F | Each | |
| 1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 000000 |
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
| 1/2" | 0.035" | 316 Stainless Steel | 2,000 psi @ 72° F | -420° to 1200° | 00000000 | 00000 |
PTFE sleeves are plastic instead of stainless steel, so they won’t damage tubing.
| For Tube OD | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
| 1/2" | PTFE Plastic | Not Rated | -65° to 350° | 00000000 | 00000 |
Tube supports are recommended for soft plastic tubing to prevent the tube from collapsing.
For Tube | |||||
|---|---|---|---|---|---|
| OD | ID | Tube Support Material | Temp. Range, °F | Each | |
| 1/2" | 1/4" | 316 Stainless Steel | -420° to 1200° | 00000000 | 000000 |