How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Crimp-On Hose Fittings for Hydraulic Fluid
Crimp these fittings onto hydraulic hose for a permanent, leak-tight connection. Since they crimp on, they handle higher pressure than screw-on fittings. To install, use Parker crimping tools and dies (not included).
Fittings with a female end swivel 360° until tightened without you needing to move or twist the entire hose, making them easy to install.
Fittings with an O-ring face seal end are also known as Seal-Lok fittings.
Note: Fittings are only for use with hydraulic hose.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -40° to 210° F
- For Hose Manufacturer Series:
Parker 43 Series Fittings: 302 SAE J517 100R2AT, 422 SAE J517 100R1AT, 487 ISO17582-AC, 777 ISO17582-CC
Parker 56 Series Fittings: 510D J517 SAE 100R7, 518D J517 SAE 100R7
37° Flared Fittings for Stainless Steel Tubing
- Tubing: Use with welded or seamless 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514, except fittings with BSPP and BSPT threads meet SAE J514 only
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They withstand high pressure, so they’re often used in hydraulic applications. Made from 316 stainless steel, they resist corrosion from water and chemicals. A complete fitting requires a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
BSPP threads and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks. UN/UNF (SAE Straight) threads are also known as O-ring boss threads.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Temperature Range: See table
| For Tube OD | Pipe Size  | Thread Size | For Use With | Material | Gasket Material | Max. Pressure | Temp. Range, °F | Each | |
NPT Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 7/8" | 3/4 | __ | Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water | 316 Stainless Steel | __ | 4,000 psi @ 72° F | -420° to 1200° | 000000000 | 0000000 |
UN/UNF (SAE Straight) Threads | |||||||||
| 3/4" | __ | 1 3/16"-12 | Air, Hydraulic Fluid, Isopropyl Alcohol, Water | 316 Stainless Steel | Buna-N Rubber | 5,000 psi @ 72° F | -30° to 250° | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: See table
| For Tube OD | Material | Temp. Range, °F | Each | |
| 7/8" | 316 Stainless Steel | -380° to 800° | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: See table
| For Tube OD | Material | Temp. Range, °F | Each | |
| 7/8" | 316 Stainless Steel | -380° to 800° | 000000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
37° Flared Fittings for Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
NPTF (Dryseal) threads are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: See table
| For Tube OD | Pipe Size | Material | Max. Pressure | Temp. Range, °F | Each | |
NPTF Threads | ||||||
|---|---|---|---|---|---|---|
| 7/8" | 3/4 | Zinc-Plated Steel | 2,500 psi @ 72° F | -60° to 400° | 00000000 | 000000 |
- Temperature Range: -60° to 400° F
| For Tube OD | Material | Max. Pressure | Each | |
| 7/8" | Zinc-Plated Steel | 2,500 psi @ 72° F | 000000000 | 000000 |
- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
For Tube OD | |||||
|---|---|---|---|---|---|
| Inch | Metric, mm | Sleeve Material | Max. Pressure | Each | |
Inch × Metric Sleeve Adapters | |||||
| 7/8" | 20 | Zinc-Plated Steel | 2,500 psi @ 72° F | 000000000 | 00000 |
- Temperature Range: -60° to 400° F
| For Tube OD | Nut Material | Max. Pressure | Each | |
| 7/8" | Zinc-Plated Steel | 2,500 psi @ 72° F | 00000000 | 000000 |