How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
How to Measure Threaded Pipe Size
More
About Hose
More
Metal Barbed Hose Fittings for Air and Water
Slide the barbed end into rubber hose and secure with the appropriate clamp or crimp-on hose ferrule.
Brass fittings are softer than other metal fittings, so they’re easier to thread together. Plain brass fittings have good corrosion resistance. Nickel-plated brass fittings resist corrosion better than plain brass fittings.
Aluminum fittings are lighter in weight than other metal fittings. They have good corrosion resistance.
Stainless steel fittings have very good corrosion resistance. 303 stainless steel fittings won’t rust when exposed to water, making them good for areas that require frequent cleanings. Fittings with a threaded end are also known as hose nipples.
Metric, UN/UNF (SAE Straight), and BSPP male threads with gasket protect against leaks.
For technical drawings and 3-D models, click on a part number.
UN/UNF (SAE Straight)
Male Threads with Gasket
- Maximum Pressure: See table
- Maximum Vacuum: 27 in. of Hg @ 72° F
- Temperature Range: See table
- Attachment Type: See table
- Specifications Met: See table
| For Hose ID | Thread Size | Gasket Material | Max. Pressure | Temperature Range, °F | Attachment Type | Pkg. Qty. | Pkg. | |
Brass | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3/8" | M16 × 1.5 mm | Buna-N Rubber | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 000000 |
| 1/2" | M16 × 1.5 mm | Buna-N Rubber | 300 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 12mm | M16 × 1.5 mm | Buna-N Rubber | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 13mm | M16 × 1.5 mm | Buna-N Rubber | 250 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Nickel-Plated Brass | ||||||||
| 3/8" | M16 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -20° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
| 12mm | M16 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Aluminum | ||||||||
| 13mm | M16 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
303 Stainless Steel | ||||||||
| 13mm | M16 × 1.5 mm | Buna-N Rubber | 125 psi @ 72° F | -30° to 200° | Worm-Drive Clamp, Band-and-Buckle Clamp, Crimp-On Hose Ferrule | 1 | 00000000 | 00000 |
Metal Barbed Hose Fittings for Chemicals and Petroleum
Made of stainless steel, these fittings stand up to a wide variety of chemicals, as well as fuels, gasoline, and oils. To connect, slide the barbed end into plastic or rubber hose and secure with a clamp.
Adapters are also known as hose nipples; they adapt a barbed end to a threaded end.
Metric and UN/UNF (SAE Straight) male threads have a gasket to protect against leaks.
For technical drawings and 3-D models, click on a part number.
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: -40° to 300° F
- Attachment Type: Use Band-and-Buckle Clamps
Thread | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Size | Pitch, mm | Gasket Material | Max. Pressure | For Use With | Each | |
316 Stainless Steel | |||||||
| 3/8" | M16 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 000000 |
| 1/2" | M16 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
| 3/4" | M16 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
| 13mm | M16 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
| 19mm | M16 | 1.5 | Fluoroelastomer Rubber | 125 psi @ 72° F | Acetone, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Mineral Oil, Mineral Spirits, Vegetable Oil | 000000000 | 00000 |
Push-On Barbed Hose Fittings for Hydraulic Fluid
These fittings have sharp barbs to grip rubber push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use them in low-pressure hydraulic applications up to 350 psi. Also known as hose nipples, they adapt a barbed end to a threaded end, so you can connect to pumps, cylinders, and other equipment in your hydraulic system. Fittings are zinc-plated steel, which has excellent strength and durability. Fittings have fair corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Note: To ensure proper connection, the barbed end has to be pushed in all the way, with the hose end concealed by the ring.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 350 psi @ 72° F
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
- Maximum Pressure: See table
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 255° F
- For Hose Manufacturer Series: Parker 801
International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Hydraulic Fluid
Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close against each other, reducing fluid loss when connecting and disconnecting the line. A complete coupling consists of a plug and a socket (both sold separately) that connect and disconnect quickly. Use them when you need frequent access to a line. All of the International Standard ISO Minimal-Spill quick-disconnect plugs are compatible with any of the International Standard ISO Minimal-Spill quick-disconnect sockets of the same coupling size, regardless of the pipe size. Also known as double shut-off couplings, the plugs and sockets both have a shut-off valve that stops the flow when the coupling is separated. They are zinc-plated steel, which has excellent strength and durability and fair corrosion resistance.
Plugs are also known as nipples.
Sockets are push-to-connect style. To connect, push the plug into the socket until you hear a click. To disconnect, slide the sleeve on the socket forward until the plug ejects.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size. Pressure ratings are given for static (constant) pressure conditions.
Warning: Never attempt to connect or disconnect couplings when operating at maximum pressure. Stop the flow before you disconnect the line.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: See table
- Temperature Range: -20° to 212° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
- Maximum Pressure: 5,800 psi @ 72° F
- Temperature Range: -20° to 212° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
Air Hose with Male Threaded Fittings
- Temperature Range: -40° to 200° F
- Material: EPDM Rubber
- Color: Black or Red
Hose is made of EPDM rubber, which is the most common material for air applications.
For any combination of hose length and fittings not listed in the table, please select 5138K999. Specify hose color (red or black) and length, and fitting type, material, and size on both ends.
For technical drawings and 3-D models, click on a part number.
Air Hose with Male and Female Threaded Fittings
- Temperature Range: -40° to 200° F
- Material: EPDM Rubber
- Color: Black or Red
Hose is made of EPDM rubber, which is the most common material for air applications. Fittings that swivel until tightened are easy to install.
For any combination of hose length and fittings not listed in the table, please select 5138K999. Specify hose color (red or black) and length, and fitting type, material, and size on both ends.
For technical drawings and 3-D models, click on a part number.
Nickel-Plated Brass Push-to-Connect Tube Fittings for Air
(SAE Straight) Male
Threads with Gasket
- For Use With: Air, Lubricated Air
- Temperature Range: 0° to 140° F
- Tubing: Fittings with Release Ring and Fittings with no Release Type: Use with firm or hard (Durometer 95A-60D) nylon plastic, polyethylene plastic or polyurethane rubber
Fittings with Release Sleeve: Use with firm or hard (Durometer 95A-60D) polyethylene plastic or polyurethane rubber
Made of nickel-plated brass, these fittings have better corrosion resistance than unplated brass fittings. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect, push on the release ring or sleeve and pull the tubing out of the fitting.
Fittings with release sleeve are easier to disconnect than fittings with a release ring because they are seamless and won't collect dirt and debris.
Metric and UN/UNF (SAE Straight) male threads with gasket or thread sealant provide extra protection against leaks.
For technical drawings and 3-D models, click on a part number.
(SAE Straight) Male
Threads with Gasket
Release Sleeve | |||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
Metric Threads | |||||||
| 1/4" | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 000000 |
| 3/8" | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
| 1/2" | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
| 10mm | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
| 12mm | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
(SAE Straight) Male
Threads with Gasket
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
Release Sleeve | |||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
Metric Threads | |||||||
| 1/4" | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 000000 |
| 3/8" | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
| 10mm | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
| 12mm | M16 | 1.5 | Nickel-Plated Brass | Buna-N Rubber | 230 psi @ 72° F | 00000000 | 00000 |
Low-Temperature/High-Pressure D.O.T. Push-to-Connect Tube Fittings for Air
- Temperature Range: -40° to 200° F
- Tubing: Use with hard (Durometer 65D) nylon plastic
- Specifications Met:
Cartridges: D.O.T. FMVSS 571, SAE J2494-4, SAE J1131
All other fittings: D.O.T. FMVSS 571
Connect high-pressure brake lines with fittings that won’t crack in frigid temperatures. Often used on commercial trucks and trailers, these fittings meet Department of Transportation FMVSS 571 safety standards. Also known as instant fittings, they connect to tubing with a simple push, and an internal gripping ring and O-ring will hold the tubing tight. A built-in tube support slips inside the tubing to prevent it from collapsing. To disconnect, push on the release ring and pull the tubing out of the fitting. All have good corrosion resistance.
Metric male threads have a gasket to protect against leaks.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Size | Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
Metric Threads | |||||||
| 1/4" | M16 | 1.5 | Brass | Buna-N Rubber | 250 psi @ 72° F | 00000000 | 000000 |
| 3/8" | M16 | 1.5 | Brass | Buna-N Rubber | 250 psi @ 72° F | 00000000 | 00000 |
| 1/2" | M16 | 1.5 | Brass | Buna-N Rubber | 250 psi @ 72° F | 00000000 | 00000 |
| 5/8" | M16 | 1.5 | Brass | Buna-N Rubber | 250 psi @ 72° F | 00000000 | 00000 |
| 8mm | M16 | 1.5 | Brass | Buna-N Rubber | 250 psi @ 72° F | 00000000 | 00000 |
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Size | Pitch, mm | Tube Connection Material | Pipe Connection Material | Gasket Material | Color | Release Ring Material | Max. Pressure | Each | |
Metric Threads | ||||||||||
| 1/4" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 000000 |
| 3/8" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
| 1/2" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
| 5/8" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
Fittings with intermittent swivel rotate 360° before and after installation as needed to allow movement in the system and to prevent kinking.
Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Size | Pitch, mm | Tube Connection Material | Pipe Connection Material | Gasket Material | Color | Release Ring Material | Max. Pressure | Each | |
Metric Threads | ||||||||||
| 1/4" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 000000 |
| 3/8" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
| 1/2" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
| 5/8" | M16 | 1.5 | Nylon Plastic | Brass | Buna-N Rubber | Black | Brass | 250 psi @ 72° F | 00000000 | 00000 |
Low-Temperature D.O.T. Push-to-Connect Tube Fittings for Air
- Temperature Range: -40° to 210° F
- Tubing: Use with hard (Durometer 65D) nylon plastic
- Specifications Met: D.O.T. FMVSS 571, SAE J1131, SAE J2494-1, SAE J2494-3
except Identification Rings: D.O.T. FMVSS 571
Connect air brake lines with fittings that won’t crack in sub-zero temperatures. They meet Department of Transportation FMVSS 571 safety standards, so they’re often used in commercial trucks and trailers. Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Fittings have a built-in tube support that slips inside the tubing to prevent it from collapsing. To disconnect, push on the release ring and pull the tubing out of the fitting. They have good corrosion resistance. Use them at up to 150 psi and attach them to hard tubing.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Thread Size | Material | Max. Pressure | Features | Each | |
Metric Threads | ||||||
|---|---|---|---|---|---|---|
| 12mm | M16 | Brass | 150 psi @ 72° F | Acrylic Thread Sealant | 000000000 | 000000 |
45° Flared Fittings for Copper and Brass Tubing
- Temperature Range: -65° to 250° F
- Tubing: Use with seamless brass and copper that meets ASTM B280
No sleeve is required to assemble these fittings, which makes for a faster, more convenient installation compared to 37° flared fittings. They require a nut (sold separately) for each tube end. Fittings are also known as refrigeration and SAE fittings. They are brass for good corrosion resistance.
Metric and UN/UNF (Straight) threads have a gasket to protect against leaks. Copper tube size is the accepted designation of the copper tubing industry, not the actual tube OD.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except adapters for 1/8" and 1" tube OD are not for use with fuel oil
- Specifications Met: See table
For Tube | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Specifications Met | Each | |
Metric Threads | |||||||||
| 1/2" | 0.032" | M16 | 1.5 | Brass | Fluoroelastomer Rubber | 750 psi @ 72° F | SAE J512, SAE J513, UL Listed | 000000000 | 000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water
- Specifications Met: SAE J512, SAE J513, UL Listed
For Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
Metric Threads | ||||||||
| 1/2" | 0.032" | M16 | 1.5 | Brass | Fluoroelastomer Rubber | 750 psi @ 72° F | 000000000 | 000000 |
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Mineral Oil, Refrigerant, Water; except nuts for 1" tube OD are not for use with fuel oil
- Specifications Met: SAE J512, SAE J513, UL Listed; except nuts for 1" tube OD meet SAE J512 and SAE J513 only
Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: See Table
- Tubing: Use with copper
- Specifications Met: See Table
Create a strong connection without heating, flaring, or soldering. These fittings have a single sleeve (ferrule or olive) that bites into tubing as you tighten the nut. Both the nut and sleeve are included. Also known as single ferrule fittings, they are easier to install than yor-lok fittings which have two ferrules. They’re often used in low to medium pressure applications, such as plumbing and compressed air systems, which don’t require the strength of a yor-lok fitting. Compression fittings for copper tubing can withstand higher pressures than compression fittings for plastic and rubber tubing. Made of brass, they have good corrosion resistance.
To connect a compression fitting to tube, slide the nut and sleeve onto the tube. Then push the tube into the fitting until it butts against the back of the fitting. Tighten the nut onto the fitting to compress the sleeve.
Threaded connections can be taken apart as needed for maintenance and repair.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Thread Size | Thread Pitch, mm | Material | Max. Pressure | Temp. Range, °F | Each | |
Metric Threads | ||||||||
| 12mm | 1mm | M16 | 1.5 | Brass | 790 psi @ 72° F | -40° to 250° | 00000000 | 000000 |
For Tube | |||||||
|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | Temp. Range, °F | Pkg. Qty. | Pkg. | |
| 12mm | Not Rated | Brass | Not Rated | -40° to 250° | 1 | 0000000 | 00000 |
37° Flared Fittings for Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on tubing that is flared to 37°. They require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately. Fittings are zinc-plated steel for fair corrosion resistance.
To prevent leaks, UN/UNF (SAE Straight) male threads have a gasket. Metric and BSPP male threads have either a gasket or a gasket and washer.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: NPT: -65° to 400° F
NPTF and BSPT: -60° to 400° F
Metric and BSPP with O-Rings: -30° to 200°F
BSPP with Washers: -20° to 212° F
| For Tube OD | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
Metric Threads | |||||||
|---|---|---|---|---|---|---|---|
| 3/8" | M16 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | 2,300 psi @ 72° F | 00000000 | 000000 |
- Temperature Range: -60° to 400° F
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
For Tube OD | |||||
|---|---|---|---|---|---|
| Inch | Metric, mm | Sleeve Material | Max. Pressure | Each | |
Inch Sleeves | |||||
| 3/8" | __ | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 00000 |
| 1/2" | __ | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 0000 |
Inch × Metric Sleeve Adapters | |||||
| 3/8" | 10 | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 0000 |
| 1/2" | 12 | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 0000 |
Compression Fittings for Steel Tubing
- For Use With: Inch: Air, Hydraulic Fluid, Water
Metric: Hydraulic Fluid - Tubing: Inch: Use with welded steel
Metric: Use with seamless steel - Specifications Met: Inch: SAE J514
Metric: ISO 8434, DIN 2353
A single sleeve (ferrule) bites into tubing as you tighten the nut, creating a strong seal. The nut and sleeve are included. Fittings are also known as flareless and bite fittings.
Zinc-plated steel fittings have fair corrosion resistance.
ISO 8434 (formerly DIN 2353) fittings meet international standards for tube fitting pressures.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: See table
For Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Thread Size | Thread Pitch | Material | Max. Pressure | Temp. Range, °F | Each | |
Metric Taper Threads | ||||||||
| 12mm | Not Rated | M16 | 1.5 mm | Zinc-Plated Steel | 3,600 psi @ 72° F | -20° to 230° | 00000000 | 000000 |
- Temperature Range: See table
For Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| OD | Wall Thick. | Thread Size | Thread Pitch | Material | Max. Pressure | Temp. Range, °F | Each | |
Metric Taper Threads | ||||||||
| 12mm | Not Rated | M16 | 1.5 mm | Zinc-Plated Steel | 3,600 psi @ 72° F | -20° to 230° | 00000000 | 000000 |
- Temperature Range: See table
| For Tube OD | Nut Material | Max. Pressure | Temp. Range, °F | Each | |
| 12mm | Zinc-Plated Steel | 3,600 psi @ 72° F | -20° to 230° | 00000000 | 00000 |
- Temperature Range: See table
| For Tube OD | Sleeve Material | Max. Pressure | Temp. Range, °F | Each | |
| 12mm | Zinc-Plated Steel | 3,600 psi @ 72° F | -20° to 230° | 00000000 | 00000 |
Vibration-Resistant Compression Fittings for Steel Tubing
- For Use With: Cutting Oil, Diesel Fuel
- Temperature Range: -30° to 250° F
- Tubing: Use with seamless steel
- Specifications Met: DIN 3861
The sleeve (ferrule) in these fittings is made of rubber instead of metal, so it cushions the tubing and absorbs vibration while creating a tight seal. Fittings are also known as flareless fittings. They are zinc-plated steel for fair corrosion resistance.
| For Tube OD, mm | Thread Size | Thread Pitch, mm | Material | Gasket Material | Max. Pressure | Each | |
Metric Threads | |||||||
|---|---|---|---|---|---|---|---|
| 12 | M16 | 1.5 | Zinc-Plated Steel | Buna-N Rubber | 5,800 psi @ 72° F | 0000000 | 0000000 |
| For Tube OD, mm | Nut Material | Max. Pressure | Each | |
| 12 | Zinc-Plated Steel | 5,800 psi @ 72° F | 0000000 | 00000 |
Low-Profile Hex Manifolds
When you’re short on vertical space, these manifolds are a good fit—they have outlets on the side instead of on top, so they have a lower profile than rectangular manifolds. Use them to distribute air, water, or hydraulic fluid to five locations from a single supply source. Manifolds have mounting holes, so you can mount from the top.
Anodized aluminum manifolds are the industry standard for the most common types of applications. They are lighter in weight than other metal manifolds and have good corrosion resistance. These manifolds are anodized for a black finish.
316 stainless steel manifolds have excellent corrosion resistance and can handle fuel, gasoline, coolant and other harsh substances.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Water, Hydraulic Fluid
- Temperature Range: -10° to 200° F
- Maximum Pressure: 1,000 psi @ 72° F
- Maximum Vacuum: 27 in. of Hg @ 72° F
Inlet | Outlet | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| No. of Outlets | Thread Size | Thread Pitch, mm | Thread Size | Thread Pitch, mm | Wd., mm | Ht., mm | Outlet Spacing | Color | Each | |
| 5 | M16 | 1.5 | M14 | 1.5 | 47 | 25 | Standard | Black | 00000000 | 0000000 |
- For Use With: Air, Water, Hydraulic Fluid, Alcohol, Coolant, Cutting Oil, Deionized Water, Diesel Fuel, Fuel Oil, Gasoline, Mineral Oil, Nitrogen
- Temperature Range: -100° to 500° F
- Maximum Pressure: 3,500 psi @ 72° F
- Maximum Vacuum: 27 in. of Hg @ 72° F
Inlet | Outlet | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. of Outlets | Thread Size | Thread Pitch, mm | Thread Size | Thread Pitch, mm | Wd., mm | Ht., mm | Outlet Spacing | Each | |
| 5 | M16 | 1.5 | M14 | 1.5 | 47 | 25 | Standard | 00000000 | 0000000 |