We will reply to your message within an hour.
These durable wash guns are typically used for frequent washdowns and cleanup.
For light duty spray-down applications, attach these wash guns to any standard garden hose.
Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.
These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.
Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.
With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.
Primarily used on spigot valves, slide these knobs over valves with a square stem and secure them in place with your fastener.
Whether you're looking for a stopgap or permanent replacement, these valve handles adjust to fit a range of valve and faucet stem widths.
Adjust the flow while dispensing liquid chemicals.
Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down.
Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC).
Dispense and control the flow of coolant with these nozzles.
Control the flow while dispensing diesel fuel with these nozzles.
Nozzles allow you to control the flow while dispensing hydraulic fluid.
These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.
To avoid contaminating diesel exhaust fluid (DEF), these nozzles are made of anodized aluminum and have a stainless steel spout.
Twist the barrel to adjust water flow.
There’s no shut-off valve on these nozzles, so water instantly flows.
Use the lever to turn water flow on and off.
Attach these valve bodies to your actuator to automatically or manually control flow in your line.
Add these switches to your abrasive blasting hose to prevent it from spraying if the operator loses control. Also known as deadman switches, they prevent injuries and reduce wasted material by springing back to the off position when the operator lets go.