For use in food-processing areas, these hooks withstand repeated washdowns.

Suspend large and bulky items, such as coils of rope and step ladders.

Save space with these spring-loaded hooks that mount flush with the wall and retract automatically when not in use.

Racks have multiple hooks to hang items

Use screws to mount these hooks to the ceiling or under a surface, such as a bench top.

Hang multiple items from magnetic surfaces, such as steel walls and cabinets, without the need for screws or adhesive.

Threads on one end make it easy to screw these hooks directly into a wall.

The anchor flares out to grip the wall and keep the hook securely mounted.

Stick the suction cup to a smooth, nonporous surface to temporarily hang lightweight items.

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

For use on a single line, these polypropylene clamps withstand moisture and most chemicals. They're commonly used to route tubing in compressed air systems. A folding arm closes to secure material.

Join these clamps together to line up multiple pipes, cables, or tubes side-by-side, even when they are different sizes.

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface.

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.

For a strong, secure connection, mount these hangers by welding them to a rod.

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

Suspend and route flat-bottomed objects such as strut channel and small duct.

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Attach with a screw or other fastener.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

These ties stretch to hold material tightly without slipping.

Ties are made from heat-resistant fabric to withstand high temperatures.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Flexible enough for small bundles, these ties are often used for electronics.

Able to fit small bundles, these thin ties are more flexible than other ties.

Create a cable tie with a buckle—no sewing required.

The buckle allows you to cinch these ties tight.

These cable ties come with a material certificate with traceable lot number and product shelf life.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Use the built-in blade to remove excess length once these ties are secure.

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

Protect sensitive electronic equipment from static buildup.

With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.

Create custom-length cable ties for large bundles and heavy materials.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Identify bundles at a glance.

These ties are less likely to crack and break from dryness than regular cable ties.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Add push-in cable holder to this adapter to mount cable to DIN rail.

Keep individual wires separate by laying them between the coils on these holders.

Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.

These ties are wide and flat for a no-slip grip.

Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.

The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.

Stamp or emboss these ties to identify material.

Secure and separate two bundles with the same tie.