How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Hose
More
Flexible Kink Absorbers for Garden Hose
- Maximum Pressure: 120 psi @ 72° F
Use these kink absorbers to ensure maximum water flow and extend the life of your garden hose. They connect between the hose and faucet to eliminate sharp hose bends that can cause kinking and hose damage.
Hose | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Garden Hose Trade Size | Thread Type | Fitting Material | Material | Color | Outer Coil Material | Washer Material | Lg. | Each | |
| 3/4 | GHT | Zinc | PVC Plastic | Green | Steel | TPR Rubber | 5 49/64" | 0000000 | 00000 |
Flexible Kink Absorbers for Air and Water Hose
- Temperature Range: -25° to 350° F
Reduce sharp bends at the end of air and water hose that block flow and damage the hose. These kink absorbers support the connection between the hose and fitting. To install, push these kink absorbers over hose before attaching a fitting. If you’re having trouble getting them onto your hose, lubricate with soapy water. Once you’ve put on a fitting, slide these absorbers back toward the end of the hose, securing them over the fitting’s connection point.
Choose a kink absorber with an ID that is the same or slightly smaller than your hose's OD. Use with crimp-on ferrules or with push-on hose fittings; the end will not stretch over most hose clamps.
For technical drawings and 3-D models, click on a part number.
Metal Barbed Hose Fittings with Kink Absorber for Air and Water
Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber. The kink absorber reduces strain on your line, preventing damage. To install, slide the kink absorber onto your hose then push the barbed end of the fitting into the hose. The fitting's barbed end also has threads that connect the kink absorber, hose, and fitting all together. As you thread on the kink absorber to the fitting, it compresses against the hose, forming a strong seal.
Fittings that swivel until tightened rotate, so you don’t need to twist your hose during installation.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 200 psi @ 72° F
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 160° F
- Maximum Pressure: 200 psi @ 72° F
- Maximum Vacuum: 28 in. of Hg @ 72° F
- Temperature Range: -40° to 160° F
For Hose | Strain Relief | ||||||
|---|---|---|---|---|---|---|---|
| OD | ID | Pipe Size | Lg. | Material | Features | Each | |
Brass | |||||||
| 3/8" | 1/4" | 1/4 | 4" | Nylon Plastic | Acrylic Thread Sealant | 0000000 | 00000 |
| 15/32" | 5/16" | 1/4 | 4" | Nylon Plastic | Acrylic Thread Sealant | 0000000 | 00000 |
| 15/32" | 5/16" | 3/8 | 4" | Nylon Plastic | Acrylic Thread Sealant | 0000000 | 00000 |
| 9/16" | 3/8" | 1/4 | 4" | Nylon Plastic | Acrylic Thread Sealant | 0000000 | 00000 |
| 9/16" | 3/8" | 3/8 | 4" | Nylon Plastic | Acrylic Thread Sealant | 0000000 | 00000 |
Garden Hose for Drinking Water
- Temperature Range: 32° to 100° F
- Material: PVC
- For Use Outdoors: Yes
Safely transfer drinking water from a garden hose connection. Both the hose and fittings meet strict NSF/ANSI standards for drinking water. The fittings are certified by NSF/ANSI to have low-lead content. Also known as marine hose, this hose won't impart taste or odor in your drinking water.
| Hose Size | ID | OD | Color | Features | Specifications Met | Each | |
4-ft. Lengths | |||||||
|---|---|---|---|---|---|---|---|
Nickel-Plated Brass Threaded GHT Male × Nickel-Plated Brass Threaded GHT Female | |||||||
100 psi @ 72° F Max. Pressure | |||||||
| 3/4 × 3/4 | 5/8" | 13/16" | Blue | Kink Absorbers | NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 000000 |
10-ft. Lengths | |||||||
Nickel-Plated Brass Threaded GHT Male × Nickel-Plated Brass Threaded GHT Female | |||||||
100 psi @ 72° F Max. Pressure | |||||||
| 3/4 × 3/4 | 5/8" | 13/16" | Blue | Kink Absorbers | NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
25-ft. Lengths | |||||||
Nickel-Plated Brass Threaded GHT Male × Nickel-Plated Brass Threaded GHT Female | |||||||
100 psi @ 72° F Max. Pressure | |||||||
| 3/4 × 3/4 | 5/8" | 13/16" | Blue | Kink Absorbers | NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
50-ft. Lengths | |||||||
Nickel-Plated Brass Threaded GHT Male × Nickel-Plated Brass Threaded GHT Female | |||||||
100 psi @ 72° F Max. Pressure | |||||||
| 3/4 × 3/4 | 5/8" | 13/16" | Blue | Kink Absorbers | NSF/ANSI 372, NSF/ANSI 61 | 0000000 | 00000 |
Cold-Weather Garden Hose
- Temperature Range: -30° to 180° F
- Material: TPE Rubber
- Color: Red
- For Use Outdoors: Yes
Bend and flex this hose in the coldest weather—down to -30° F. A TPE rubber cover conducts heat to prevent it from becoming stiff and cracking, even if water inside the hose freezes. The spigot end has a kink absorber to protect the connection point from the strain of pulling or harsh bends.
For technical drawings and 3-D models, click on a part number.
50-ft. Lengths | ||||||
|---|---|---|---|---|---|---|
| Hose Size | ID | OD | Max. Pressure | Features | Each | |
Anodized Aluminum Threaded GHT Male × Anodized Aluminum Threaded GHT Female | ||||||
| 3/4 × 3/4 | 5/8" | 7/8" | 100 psi @ 72° F | Kink Absorbers | 0000000 | 000000 |
Low-Temperature Lightweight Air Hose with Fittings
- Temperature Range: -65° to 150° F
- Material: PVC
- Color: Blue, Red, or Yellow
Made of PVC, this hose stays flexible in temperatures as low as -65° F. This hose is lighter in weight and less cumbersome to handle than EPDM, but tough enough to resist scratches, scrapes, and UV damage. It also resists curling, so it’ll lay flat. Each end has a kink absorber to prevent sharp bends from damaging the hose.
For technical drawings and 3-D models, click on a part number.
On/Off Valves with Garden Hose Threads
Start and stop the flow of water through your garden hose.
Plastic valves are lighter in weight than metal valves, but they’re typically not as durable. TPR-coated valves stay safe to touch because they won’t get too hot in the summer or too cold in the winter.
Valves with a contoured lever handle are easy to grip, even if they're wet, oily, or you're wearing gloves.
Add kink absorbers to eliminate sharp bends between your hose and your valve, maximizing flow and preventing damage.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Water
- Temperature Range: 35° to 100° F
| Handle Type | Flow Coefficient (Cv) | Max. Pressure | End-to-End Lg. | Body Finish | Includes | Each | |
Plastic Body | |||||||
|---|---|---|---|---|---|---|---|
| Contoured Lever Handle | 41.6 | 60 psi @ 100° F | 6 7/8" | TPR Coated | Washers, Flexible Kink Absorbers | 00000000 | 000000 |
Hose | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Pressure | Lg. | Fitting Material | Material | Color | Outer Coil Material | Washer Material | Each | |
| 120 psi @ 72° F | 5 49/64" | Zinc | PVC Plastic | Green | Steel | TPR Rubber | 0000000 | 00000 |