Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable. Use them to illuminate small and microscopic parts. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Create a high-intensity lighting system for inspecting small and microscopic parts. To create a complete lighting system, you need a fiber-optic light, fiber-optic cable, and an adapter to connect the cable to the light. They cast a neutral white light often found in workspaces.

Add a probe to 1/8" dia. fiber-optic cables to illuminate small areas that have recessed or deep orifices.

Pair a focusing lens with a positionable cable to create a concentrated beam of light on your work.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

IP65 lights are dust tight and protect against low-pressure washdowns, such as water from a garden hose. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Bases allow you to convert Style A lights with a 24" arm reach and Style C lights from a fastener mount to a clamp-on or magnetic mount.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

Gooseneck arms can be repositioned faster and more easily than articulating arms. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, are for use on the hardwire lights to convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. These lights emit a neutral white light often found in workspaces.

For technical drawings and 3-D models, click on a part number.

Free your hands for other work by mounting a flashlight to a nearby surface. Flashlights are sold separately.

Shine light into hard-to-reach spaces with these flexible-arm flashlights. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a uniform beam, which is especially good for close-up tasks and inspection work. The body is knurled for a nonslip grip. All flexible flashlights were tested and rated to ANSI/NEMA FL 1 standards.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Lights produce a daylight appearance that highlights white/blue tones, which is good for inspecting. For indoor use.