Gasoline Hose Nozzles

Filter by

System of Measurement

Pipe Size

Shut-Off Type

Gender

Thread Type

Material

Shape

Connects To

Fitting Connection

Scuff Guard Color

Hose ID

Maximum Flow Rate

Maximum Pressure @ Temperature

Fitting Type

Swivel Type

Spout OD

Maximum Temperature

Length

Minimum Temperature

Gasket Material

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Spout Length

17 Products

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Nozzles
					Spout							Threaded Swivels		Replacement Hold-Open Clip Kits
Max. Flow Rate, gpm	Pipe Size	Connection	Max. Pressure	Temperature Range, °F	OD	Lg.	Material	Shut-Off Type	Specifications Met		Each		Each		Each
Nozzles
10	3/4	Threaded NPT Female	50 psi @ 72° F	-20° to 125°	13/16"	6 1/2"	Aluminum	Automatic, Manual	UL Listed	0000000	0000000	0000000	000000	000000	00
Nozzles with Three-Position Hold-Open Clip
10	3/4	Threaded NPT Female	50 psi @ 72° F	-20° to 125°	13/16"	6 1/2"	Aluminum	Automatic, Manual	__	0000000	000000	000000	00	0000000	000000

Optional Red Splash Guard

0000000

Each

000000

Threaded Swivels for Hose Nozzles

To prevent hose from twisting, kinking, and wearing prematurely, these swivels rotate before and after installation as needed. Connect them to the threaded end of your dispensing hose.

Anodized aluminum swivels have good corrosion resistance and are lighter in weight than chrome-plated brass swivels. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.

Straight swivels rotate at the female connection point only. They are also known as inline swivels.

45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.

For technical drawings and 3-D models, click on a part number.

Straight Swivels

Straight

For Use With Gasoline, Hydraulic Fluid, and Coolant
Pipe Size	Connection	Max. Pressure	Temperature Range, °F	Lg.		Each
Anodized Aluminum
1 1/4 × 1 1/4	Threaded NPT Female × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	4 1/2"	0000000	0000000
1 1/2 × 1 1/2	Threaded NPT Female × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	5"	0000000	000000
2 × 2	Threaded NPT Female × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	6 3/8"	0000000	000000
Chrome-Plated Brass
1 1/4 × 1 1/4	Threaded NPT Female × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	4 1/2"	0000000	000000
1 1/2 × 1 1/2	Threaded NPT Female × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	5"	0000000	000000
2 × 2	Threaded NPT Female × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	6 3/8"	0000000	000000

45° Offset Swivels

45° Offset

For Use With Gasoline and Diesel Fuel
Pipe Size	Connection	Max. Pressure	Temperature Range, °F	Lg.	Gasket Material	Specifications Met		Each
Aluminum
3/4 × 3/4	Threaded NPT Female × Threaded NPT Male	50 psi @ 72° F	-20° to 120°	4 1/8"	Buna-N Rubber	UL Listed	0000000	000000
1 × 1	Threaded NPT Female × Threaded NPT Male	50 psi @ 72° F	-20° to 120°	4 3/4"	Buna-N Rubber	UL Listed	0000000	000000

Thread Sealants

Container
Size, fl. oz.	Type	Max. Pressure for Fluids, psi	Temp. Range, °F		Each
For Use With Gasoline, Diesel Fuel, Hydraulic Oil, and Coolant
4	Brush-Top Can	10,000	-100° to 600°	00000000	000000

Barbed Swivels for Hose Nozzles

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely. They are also known as inline swivels. Swivels are anodized aluminum, which is lightweight with good corrosion resistance.

For technical drawings and 3-D models, click on a part number.

						Anodized Aluminum
For Hose ID	Pipe Size	Connection	Max. Pressure	Temperature Range, °F	Lg.		Each
For Use With Gasoline, Hydraulic Fluid, and Coolant
1"	1	Barbed Male × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	2 13/16"	0000000	000000
1 1/4"	1 1/4	Barbed Male × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	3 7/8"	0000000	000000
1 1/2"	1 1/2	Barbed Male × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	4 1/8"	0000000	000000
2"	2	Barbed Male × Threaded NPT Male	150 psi @ 72° F	-65° to 250°	4 11/16"	0000000	000000