The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

Particles in liquid won’t clog these nozzles because of their unique internal and external design.

Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.

These nozzles project their spray at a right angle from their threaded connection.

Save time in applications where you often need to replace worn nozzles. These nozzles consist of a base and a nozzle, so you can replace the tip with just a quarter turn.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.

Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

A check valve prevents the nozzle from dripping when it is turned off.

Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.

A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC).

Dispense and control the flow of coolant with these nozzles.

Slide the barbed end of these swivels into your dispensing hose and connect with a clamp. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.