Hose Shields | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Performance Properties Performance Properties

Abrasion Resistant

Interference Shielding

	For Material Thickness (B) For Material Thickness (B)

	For OD For OD

	Plug Type Plug Type


Push In	Snap In

Locking	Screw In

Pull Through	Expandable

Tamper Evident

	Minimum Temperature Minimum Temperature

	Heat-Shrink Tubing Type Heat-Shrink Tubing Type


Tubing	Assortments

Splitters	Tapered Tubing

End Caps	No-Heat Tubing

Wrap-Around Tubing	Crossover Tubing

	ID Before Shrinking ID Before Shrinking

	Sleeving Type Sleeving Type


Non- Expandable	Expandable

Corrugated	Spiral Wrap

Wrap-Around

	Profile Profile


Straight	Tapered

	Flange Diameter (D) Flange Diameter (D)

	Flexibility Flexibility

4,836 Products

Expandable Sleeving

High-Temperature Expandable Sleeving

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Abrasion-Resistant Expandable Sleeving

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Fray-Resistant Expandable Sleeving

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Interference-Shielding Expandable Sleeving

Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Flame-Retardant Expandable Sleeving

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Duct-Rated Flame-Retardant Expandable Sleeving

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Expandable Sleeving

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

High-Strength Expandable Sleeving

With excellent torsional strength, this sleeving withstands the extreme twisting found in robotics. It has impact strength similar to steel yet is lighter than most other sleeving materials. Stretch it to fit over items for easy installation; it tightens around its contents for a secure fit.

Slip-Resistant Expandable Sleeving

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Sleeving

Fiberglass High-Temperature Sleeving

This sleeving withstands temperatures over 1000°F, such as in refineries.

Silica High-Temperature Sleeving

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

Aramid High-Temperature Sleeving

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

No-Irritation Ceramic High-Temperature Sleeving

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

Abrasion-Resistant Sleeving

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

High-Strength Sleeving

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Tube Sleeving

Extra-Thick Spark-Resistant Tube Sleeving

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Spark-Resistant Tube Sleeving

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

High-Temperature Electrical-Insulating Tube Sleeving

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

Electrical-Insulating Tube Sleeving

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

High-Temperature Tube Sleeving

Use this PTFE sleeving in applications where temperatures reach up to 500° F.

Expandable Electrical-Insulating Tube Sleeving

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

Chemical-Resistant Tube Sleeving

Made of PVC, this sleeving resists chemicals, oil, and acids.

Corrugated Sleeving

High-Strength Slit Corrugated Sleeving

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

Slit Corrugated Sleeving

A slit along the length makes this sleeving easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Heat-Reflective Slit Corrugated Sleeving

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Flame-Retardant Slit Corrugated Sleeving

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

Corrugated Sleeving

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

Heat-Reflective Corrugated Sleeving

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

Two-Piece Interlocking Corrugated Sleeving

The two halves of this sleeving nest into each other, fully enclosing contents. It has interlocking ridges that overlap to keep out dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Hinged Interlocking Corrugated Sleeving

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Spiral Sleeving

Self-Extinguishing Spiral Sleeving

Made with a self-extinguishing additive, this sleeving will not produce fumes when exposed to open flame or high temperatures. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Chemical-Resistant Spiral Sleeving

Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Spiral Sleeving

Wrap this sleeving around cable, cords and wires to protect them and to form bundles.

UV-Resistant Spiral Sleeving

This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Metal-Detectable Spiral Sleeving

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.

Wrap-Around Sleeving

Hook-and-Loop Wrap-Around Sleeving

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Zippered Wrap-Around Sleeving

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Hook-and-Loop Wrap-Around
Sleeving for Universal Robots

Organize and protect the cables on your Universal Robots arm without hindering its movement.

Snap-Close Wrap-Around Sleeving

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Wrap-Around Sleeving

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Heat-Reflective Wrap-Around Sleeving

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Spark-Resistant Wrap-Around Sleeving

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Abrasion-Resistant Wrap-Around Sleeving

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Interference-Shielding Wrap-Around Sleeving

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Wrap-Around Flat Sleeving

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Continuous-Flex Wrap-Around Sleeving

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

Chemical-Resistant Wrap-Around Sleeving

Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Wrap Sleeving

Abrasion-Resistant Wrap Sleeving

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

High-Temperature Wrap Sleeving

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Cable Ramps

Protect cable from carts, pedestrians, and other light indoor traffic.

Drive-Over Cable Ramps

These cable ramps are strong enough to withstand equipment traffic.

Bendable Drop-Over Interlocking Cable Ramps

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Wide-Span Cable Ramps

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Drop-Over Interlocking Cable Ramps

These cable ramps handle heavy pedestrian and equipment traffic.

Light Duty Drop-Over Interlocking Cable Ramps

Use in areas with light pedestrian traffic.

Lay-In Interlocking Cable Ramps

Lay your cable in the slit on the top so it stays off the floor.

Multichannel Interlocking Cable Ramps

Multiple channels let you separate different types of cable and cords.

Cable Protection Tape

Reduce tripping hazards when running cable and cords through a pedestrian area.

Cable and Hose Carriers

Accessories for Any-Which-Way
Cable and Hose Carriers

Use these accessories to mount carriers to your machinery without creating an obstruction.

Heavy Duty Open Cable and Hose Carriers

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Robot-Ready Cable and Hose Carrier Kits

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Any-Which-Way Enclosed Cable and Hose Carriers

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

Snap-Together Enclosed Cable and Hose Carriers

By completely surrounding the cable and hose, these carriers protect them from dirt, chips, and debris.

Low-Vibration Snap-Together
Open Cable and Hose Carriers

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

Lay-In Snap-Together Open Cable and Hose Carriers

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Feed-Through Snap-Together
Open Cable and Hose Carriers

Thread cable and hose through the entire length.

Heat-Shrink Tubing

Heat-Shrink Cable Splitters

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Clean Room Heat-Shrink Tubing

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

Extra-Thick Moisture-Seal Heat-Shrink Tubing

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

High-Shrink-Ratio High-Temperature
Heat-Shrink Tubing

This tubing shrinks down to a quarter of its original ID, so it creates a tight seal over irregularly shaped objects. It withstands up to 500° F.

Crossover Heat-Shrink Tubing

Organize and route wire and cable in an enclosure—this tubing bundles wires together while allowing them to reach different connection points.

Miniature Heat-Shrink Tubing

The smallest heat-shrink tubing we offer, this tubing protects wire with a 0.017" and smaller diameter.

High-Temperature Heat-Shrink Tubing

Use this tubing in applications where temperatures reach up to 500° F. It's often used to insulate electronic components.

Heat-Shrink Tubing Assortments

Keep general purpose tubing in a variety of sizes on hand.

Chemical-Resistant Heat-Shrink Tubing

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

High-Shrink-Ratio Tubing

This tubing creates a tight seal over irregularly shaped objects.

Flame-Retardant Heat-Shrink Tubing

A flame-retardant additive makes this polyolefin tubing combustion resistant and minimizes the spread of flames.

Abrasion-Resistant Fabric Heat-Shrink Tubing

Made of woven polyolefin/polyester fabric, this tubing has excellent abrasion resistance so it can be dragged over rough surfaces without damage.

Tight-Fit Chemical-Resistant Heat-Shrink Tubing

Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.

Harsh Environment Heat-Shrink Tubing Assortments

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

Food Industry Heat-Shrink Tubing

Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.

Moisture-Seal Wrap for Heat-Shrink Tubing

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.

Easy-to-Remove Heat-Shrink Tubing

Access connections more easily than with standard heat-shrink tubing. Make a small slit in this tubing to peel it away.

Interference-Shielding Heat-Shrink Tubing

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Low-Smoke Flame-Retardant Heat-Shrink Tubing

Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.

Heat-Shrink Tubing

Use this general purpose tubing to insulate and protect wire and cable.

Thin-Wall High-Temperature Heat-Shrink Tubing

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

Moisture-Seal Heat-Shrink Tubing

Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

High-Temperature Moisture-Seal Heat-Shrink Tubing

This PTFE tubing withstands temperatures up to 450° F and has an inner lining that creates a water-resistant seal when heated.

Fuel-Resistant Heat-Shrink Tubing

Resistant to diesel fuel, hydraulic fluid, and lubricating oil, this tubing is often used in vehicles.

Flame-Retardant Abrasion-Resistant
Heat-Shrink Tubing

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Chemical-Resistant Moisture-Seal Heat-Shrink Tubing

Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.

Heat-Shrink End Caps

Seal the end of crimped connections, such as motor coils, to protect them from moisture.

Extra-Thick High-Shrink-Ratio Tubing

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

High-Voltage Heat-Shrink Tubing

Protect bus bars and other high-voltage devices—this tubing withstands voltages up to 5,000 volts.

Wrap-Around Heat-Shrink Tubing

Protect wire and cable without disconnecting them from an assembly. For a water-resistant seal, this wrap has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Continuous-Flex Abrasion-Resistant Heat-Shrink Tubing

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Heat-Shrink Tubing for Ground Wire

Identify ground wire with this green-and-yellow striped tubing.

No-Heat Shrink Tubing

Create a permanent seal without applying heat. This tubing is also known as cold-shrink tubing.

High-Strength Heat-Shrink Tubing

With excellent resistance to tears and cuts, this tubing withstands demanding use.

Tapered Heat-Shrink Tubing

A different shrink ratio on each end allows this tubing to fit over cable assemblies and wire harnesses with large connections, or around connectors with a 90° elbow.

Cord Bushings

More rigid than grommets, these bushings guard cords from rubbing against the edges of holes in enclosures and panels and wearing down.

Continuous-Flex Cord Bushings

A spring extension prevents sharp bends and kinks in your cord, prolonging its life. These bushings, which are more rigid than grommets, shield cords from rubbing against the edges of holes in enclosures and panels, so they won’t wear down.

Cable and Hose Trays

Steel Formable Cable and Hose Trays

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Corrosion-Resistant Stainless Steel
Formable Cable and Hose Trays

These are the most corrosion-resistant tray systems we offer.

Cable and Hose Trays

Create a system to route cable and hose by connecting components such as straight trays and tees.

Zinc-Plated Steel Formable Cable and Hose Trays

The zinc plating on these tray systems offers good corrosion resistance.

Pipe and Tubing Guards

Safeguard pipe, tubing, and other round equipment from damage. Black and yellow stripes create a visual alert to draw attention to equipment and obstructions.

Grommets

Split Grommets

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Grommets

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut-to-Size Grommets

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Locking Grommets

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Expandable Locking Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

High-Temperature Grommets

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Grommet Assortments

Keep grommets of various sizes on hand to solve whatever problems arise.

Expandable Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

Sealing Grommets

Liquid-Tight Sealing Grommets

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Sealing Grommets

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Split Sealing Grommets

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Create-Your-Own Split Sealing Grommets

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Sanitary Sealing Grommets

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Shrink-to-Fit Sealing Grommets

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Wet-Location Snap-In Sealing Grommets

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Expandable Furniture Grommets

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Flexible Furniture Grommets

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Pipe and Tubing Grommets

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls.

Push-In Pipe and Tubing Grommets

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Fabric Grommets

Snap-In Fabric Grommets

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Rolled-Rim Reinforcing Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Self-Piercing Fabric Grommets

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommet Kits

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Reinforcing Fabric Grommets

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Shaft Grommets

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

Hose Benders

Slide these hose benders over your hose and bend to form any angle up to 90°.

Pipe, Tubing, Hose, and Fittings

Flexible Kink Absorbers for Garden Hose

Use these kink absorbers to ensure maximum water flow and extend the life of your garden hose. They connect between the hose and faucet to eliminate sharp hose bends that can cause kinking and hose damage.

Guards for Hose and Tube Clamps

Cover the ends of hose and tube clamps to prevent them from cutting people and nearby objects.

Dust Caps and Plugs for Natural
and LP Gas Hose Fittings

To keep contaminants out of your gas line, add these dust caps and plugs to natural and LP gas couplings when they’re not connected. All work with couplings that are rated ANSI Z21.41/CSA 6.9 for use with gas fuel appliances.

Hose Supports

Elevate hose off the ground to protect it from damage, and to let water on the floor reach a drain.

Fastening and Joining

TIG Welding Cable Covers

Protect the cables on your TIG guns from weld spatter.

Chrome-Plated Plugs for Stainless
Steel Socket Head Screws

Insert these plugs into the drive socket to block debris and provide a finished look.

MIG Welding Cable Covers

Protect the cables on your MIG guns from weld spatter.

Rectangular Plugs

Snap-In Rectangular Plugs

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Push-In Rectangular Plugs

Push these plugs into an opening and friction holds them in place.

Expansion Plugs for Castings

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

Ethernet Port Plugs

Shield unused RJ45 type ports on computers and other electronic equipment from debris and moisture.

Tapered Plugs

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

Hollow Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Miniature High-Temperature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

High-Temperature Tapered Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Miniature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Corks

Lightweight and moisture resistant, these plugs are laboratory-grade 100% natural cork. They’re tapered to fit a range of hole diameters.

Food Industry Tapered Plugs

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Pull-Ring Tapered Plugs

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

Tamper-Evident Tapered Plugs

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

Expandable High-Temperature Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Hollow High-Temperature Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Hollow Tapered Plug Assortments

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Expandable Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

Chemical-Resistant Tapered Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Round Plugs

Threaded Round Plugs for 37° Flared Tube

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

High-Temperature Pull-Through Round Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Sealing Plugs

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

High-Temperature Round Plugs for NPT Pipe

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Flanged Pull-Through Round Plugs

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Conductive Round Plugs

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

Threaded Round Plugs for Straight-Thread Pipe

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Miniature Pull-Through Round Plugs

Also known as mouse tails, these tiny plugs fit through-hole IDs as small as 0.022”, 0.025", or 0.03”.

Snap-In Round Plugs

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

Antistatic Round Plugs

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

Round Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Chemical-Resistant Pull-Through Round Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Threaded Round Plugs for NPT Pipe

Protect internally threaded NPT connections from contaminants during fabrication and storage.

Threaded Round Plugs for BSPT Pipe

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Pull-Tab Round Plugs

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Square Plugs

Domed Square Plugs

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Metal Square Plugs

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Snap-In Square Plugs

Flexible ridges or straps hold these plugs in place.

Push-In Square Plugs

Push these plugs into an opening and friction holds them in place.

Flange Caps

SAE Flange Caps

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Flange Caps

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

Adhesive-Back Flange Caps

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Stretchable Flange Caps

Stretch these caps over flared edges such as flanged tubing and valve handles.

Panel Plugs

Clear Locking Panel Plugs

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

Locking Panel Plugs

The wings on these plugs expand against the sides of a hole to lock them in place.

Plastic Snap-In Panel Plugs

Tapered prongs or a snap-in ring securely hold these plugs in place.

Metal Snap-In Panel Plugs

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Push-In Panel Plugs

Push these plugs into place for a finished appearance on both sides of a panel.

Metal Snap-In Panel Plug Assortments

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Vented Snap-In Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

Sealing Panel Plugs

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Vented Locking Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. All of these plugs have wings that expand against the sides of the hole to lock them in place.

Vibration-Damping Grommets

Press these grommets into a hole to add cushion on both sides.

Extreme-Temperature Vibration-Damping Grommets

In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.

Extreme-Temperature Ribbed
Vibration-Damping Grommets

In addition to having a wider temperature range than our other ribbed vibration-damping grommets, these have excellent weather resistance.

Ribbed Vibration-Damping Grommets

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.

Push-On Caps

High-Temperature Round Caps

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

Roll-Resistant Round Caps

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

Tethered Round Caps

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

High-Temperature Tapered Caps

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Tapered Cap Assortments

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Tapered Caps

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Hanging Round Caps

Slide these caps over a tool handle or other round object and use the eye to hang it.

Sure-Grip Round Caps

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

Heavy Duty Round Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Round Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Metal Round Caps

More durable than plastic caps, these provide the most protection from abrasion and impact.

Antistatic Round Caps

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

Food Industry Round Caps

Made of FDA listed materials, these caps are suitable for food contact.

Domed Round Caps

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Conductive Round Caps

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Chemical-Resistant Round Caps

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Heat-Shrink Round Caps

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Tear-Tab Caps

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

Expandable Sleeving

High-Temperature Expandable Sleeving

Abrasion-Resistant Expandable Sleeving

Fray-Resistant Expandable Sleeving

Interference-Shielding Expandable Sleeving

Flame-Retardant Expandable Sleeving

Duct-Rated Flame-Retardant Expandable Sleeving

Expandable Sleeving

High-Strength Expandable Sleeving

Slip-Resistant Expandable Sleeving

Sleeving

Fiberglass High-Temperature Sleeving

Silica High-Temperature Sleeving

Aramid High-Temperature Sleeving

No-Irritation Ceramic High-Temperature Sleeving

Abrasion-Resistant Sleeving

High-Strength Sleeving

Tube Sleeving

Extra-Thick Spark-Resistant Tube Sleeving

Spark-Resistant Tube Sleeving

High-Temperature Electrical-Insulating Tube Sleeving

Electrical-Insulating Tube Sleeving

High-Temperature Tube Sleeving

Expandable Electrical-Insulating Tube Sleeving

Chemical-Resistant Tube Sleeving

Corrugated Sleeving

High-Strength Slit Corrugated Sleeving

Slit Corrugated Sleeving

Heat-Reflective Slit Corrugated Sleeving

Flame-Retardant Slit Corrugated Sleeving

Corrugated Sleeving

Heat-Reflective Corrugated Sleeving

Two-Piece Interlocking Corrugated Sleeving

Hinged Interlocking Corrugated Sleeving

Spiral Sleeving

Self-Extinguishing Spiral Sleeving

Chemical-Resistant Spiral Sleeving

Spiral Sleeving

UV-Resistant Spiral Sleeving

Metal-Detectable Spiral Sleeving

Wrap-Around Sleeving

Hook-and-Loop Wrap-Around Sleeving

Zippered Wrap-Around Sleeving

Hook-and-Loop Wrap-AroundSleeving for Universal Robots

Snap-Close Wrap-Around Sleeving

Wrap-Around Sleeving

Heat-Reflective Wrap-Around Sleeving

Spark-Resistant Wrap-Around Sleeving

Abrasion-Resistant Wrap-Around Sleeving

Interference-Shielding Wrap-Around Sleeving

Wrap-Around Flat Sleeving

Continuous-Flex Wrap-Around Sleeving

Chemical-Resistant Wrap-Around Sleeving

Wrap Sleeving

Abrasion-Resistant Wrap Sleeving

High-Temperature Wrap Sleeving

Cable Ramps

Cable Ramps

Drive-Over Cable Ramps

Bendable Drop-Over Interlocking Cable Ramps

Wide-Span Cable Ramps

Drop-Over Interlocking Cable Ramps

Light Duty Drop-Over Interlocking Cable Ramps

Lay-In Interlocking Cable Ramps

Multichannel Interlocking Cable Ramps

Cable Protection Tape

Cable Protection Tape

Cable and Hose Carriers

Accessories for Any-Which-WayCable and Hose Carriers

Heavy Duty Open Cable and Hose Carriers

Robot-Ready Cable and Hose Carrier Kits

Any-Which-Way Enclosed Cable and Hose Carriers

Snap-Together Enclosed Cable and Hose Carriers

Low-Vibration Snap-TogetherOpen Cable and Hose Carriers

Lay-In Snap-Together Open Cable and Hose Carriers

Feed-Through Snap-TogetherOpen Cable and Hose Carriers

Heat-Shrink Tubing

Heat-Shrink Cable Splitters

Clean Room Heat-Shrink Tubing

Extra-Thick Moisture-Seal Heat-Shrink Tubing

Hook-and-Loop Wrap-Around
Sleeving for Universal Robots

Accessories for Any-Which-Way
Cable and Hose Carriers

Low-Vibration Snap-Together
Open Cable and Hose Carriers

Feed-Through Snap-Together
Open Cable and Hose Carriers

High-Shrink-Ratio High-Temperature
Heat-Shrink Tubing

Flame-Retardant Abrasion-Resistant
Heat-Shrink Tubing

Corrosion-Resistant Stainless Steel
Formable Cable and Hose Trays