Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.

Made of a PVC and Buna-N blend, this hose is lighter in weight than standard EPDM water hose.

Made of a PVC/Buna-N blend, this hose is lighter than standard EPDM water hose.

The blended rubber cover on this hose won't break down if exposed to oil, animal fats, or grease as you wash down equipment with hot water.

With fittings already attached, it’s easy to connect this hose to a washdown station and wash gun.

Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.

Made of high-purity PVC with 303 stainless steel fittings, this hose won’t contaminate water. It’s often used to transfer deionized water in applications such as semiconductor manufacturing.

Reach for this neoprene rubber hose to handle processes requiring high-pressure, high-temperature washdowns.

The steel wire reinforcement gives this hose extra strength in high-pressure conditions.

Offering excellent UV and ozone resistance, this rubber hose is a good fit for outdoor applications.

Hose blends the flexibility of PVC with the durability and abrasion resistance of rubber.

Bend and flex this hose in the coldest weather—down to -30° F.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

Let go of this hose and it retracts back to its original coiled form.

Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.

Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

With flanged ends that join with quick-clamp fittings, it’s easy to disconnect this hose for cleaning. It meets NSF/ANSI 61, a strict standard for drinking water systems, and is 3-A certified for its sanitary design.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Yarn reinforcement gives this hose good strength under pressure.

Made of FEP (fluorinated ethylene propylene), this hose can stand up to chemicals at high temperatures.

Attach barbed fittings to this hose for use in low-pressure air applications.

Designed for areas where space is limited, these reels have the smallest overall size of all our reels.

Protect your hose when it’s not in use.

Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.

Identify your air lines by color.

The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.

Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.

Hose is polyurethane so it stretches and flexes more than nylon retracting hose.

Create a retracting air line that meets your needs.

Safely deliver compressed air to brakes in semitrucks, trailers, and other vehicles with this D.O.T. certified hose. Made of flexible nylon, it will bounce back to its coiled form even after long periods of use.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

A female fitting on one end swivels until tightened, making it easy to install without rotating the entire hose.

Use this neoprene hose in temperatures up to 210° F.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.

With a tough EPDM cover, this hose won’t wear down from rubbing or scraping, crack from ozone, or degrade from UV light. It has flanged ends that join with quick-clamp fittings, so you can easily access lines that carry milk, syrup, meat, and other wet food and drinks.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed. Its fittings easily detach, giving you quick access to your line.

Blended with Buna-N, this hose remains flexible and won’t break down from oily or fatty food and beverages.

Easily access lines that move highly alcoholic or acidic wet food and beverages—this hose has flanged ends that join with quick-clamp fittings.

The most durable dry-food hose we offer, this hose is made of gum rubber for excellent resistance to cuts and tears.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

Move coolant around tight turns in crowded spaces. Made of silicone, these elbows withstand high temperatures up to 350° F.

With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.

Bend this hose in any direction and it won’t kink, even when routed through tight spaces.

Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

Transfer fluid between pumps, cylinders, and other parts of your hydraulic system.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. It comes with female threaded fittings already attached, saving you time.

The new standard for rubber hydraulic hose, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose. The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. Thanks to two layers of blended rubber, this hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends. It bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose.

With four steel wire spirals for reinforcement, this hose handles rapid changes in pressure and flow without bursting.