About Plastic and Rubber Tubing
More
About Duct Hose
More
About Hose
More
About Heat-Shrink Tubing
More
Abrasion-Resistant Lightweight Garden Hose
- Maximum Temperature: 110° F
- Material: Polyurethane
- Color: Brown
- For Use Outdoors: Yes
Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.
Continuous-Flow Garden Hose
- Maximum Temperature: 100° F
- Material: PVC
- Color: Brown with Yellow Stripe
- For Use Outdoors: Yes
Hose is designed to ensure water keeps flowing even if the hose kinks.
Air Hose
Attach barbed fittings to this hose for use in low-pressure air applications. Hose has a smooth interior for unrestricted flow. It is reinforced with yarn for good strength. It won’t degrade when exposed to ozone or UV light.
Buna-N rubber hose has good abrasion and tear resistance.
For technical drawings and 3-D models, click on a part number.
Medium-Pressure Fuel Oil Hose with Male Threaded Fittings
- Temperature Range: -20° to 140° F
- Material: Buna-N Rubber with Blended Rubber Cover
- Color: Brown or Red
Multi-spiral yarn reinforcement gives this hose strength. Hose is not for use with gasoline.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | ID | OD | Bend Radius | Max. Pressure | Color | 5 ft. | 10 ft. | 15 ft. | 25 ft. | 50 ft. | 100 ft. | |
Brass Threaded NPT Male × Brass Threaded NPT Male | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 × 1/4 | 1/4" | 5/8" | 1 1/2" | 300 psi @ 72° F | Brown | 00000000 | ||||||
| 3/8 × 3/8 | 3/8" | 3/4" | 2 1/4" | 300 psi @ 72° F | Brown | 00000000 | ||||||
| 1/2 × 1/2 | 1/2" | 7/8" | 3" | 300 psi @ 72° F | Brown | 00000000 | ||||||
| 3/4 × 3/4 | 3/4" | 1 3/16" | 4 1/2" | 300 psi @ 72° F | Brown | 00000000 | ||||||
| 1 × 1 | 1" | 1 1/2" | 7" | 300 psi @ 72° F | Brown | 00000000 | ||||||
Medium-Pressure Fuel Oil Hose with Male and Female Threaded Fittings
- Temperature Range: -20° to 140° F
- Material: Buna-N Rubber with Blended Rubber Cover
- Color: Brown
- Female Fitting Swivels Until Tightened
Multi-spiral yarn reinforcement gives this hose strength to handle higher pressures. Hose is not for use with gasoline. Fittings that swivel until tightened are easy to install.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | ID | OD | Bend Radius | Max. Pressure | 5 ft. | 10 ft. | 15 ft. | 25 ft. | |
Brass Threaded NPT Male × Brass Threaded NPSM Female | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4 × 1/4 | 1/4" | 5/8" | 1 1/2" | 300 psi @ 72° F | 000000000 | ||||
| 3/8 × 3/8 | 3/8" | 3/4" | 2 1/4" | 300 psi @ 72° F | 000000000 | ||||
| 1/2 × 1/2 | 1/2" | 7/8" | 3" | 300 psi @ 72° F | 000000000 | ||||
| 3/4 × 3/4 | 3/4" | 1 3/16" | 4 1/2" | 300 psi @ 72° F | 000000000 | ||||
| 1 × 1 | 1" | 1 1/2" | 7" | 300 psi @ 72° F | 000000000 | ||||
Choose-a-Color Identification Bands for Hose and Tube
Color code hose and tube lines in your facility to identify them at a glance. Fit these bands around lines up to 6” in diameter. They require an installation tool (sold separately) to secure them.
For technical drawings and 3-D models, click on a part number.
Flame-Retardant Soft Rubber Tubing for Air and Water
- Flexible
- Compatible with Barbed Tube Fittings
- Soft (Durometer 60A)
- Temperature Range: -70° to 450° F
This self-extinguishing, silicone rubber tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment. It is opaque, so you cannot see what’s flowing through the line. Tubing is flexible to easily bend around objects.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Specifications Met | Color | Lengths, ft. | Per Ft. | |
Opaque Silicone Rubber | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Inch | |||||||||
| 1/32" | 3/16" | 5/64" | 1/8" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 00000 | |
| 1/16" | 1/4" | 3/32" | 1/4" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 0000 | |
| 3/32" | 1/4" | 5/64" | 1/4" | 10 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 0000 | |
| 1/8" | 5/16" | 3/32" | 1/4" | 10 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 1/8" | 3/8" | 1/8" | 1/4" | 10 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 0000 | |
| 3/16" | 3/8" | 3/32" | 1/4" | 10 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 0000 | |
| 1/4" | 7/16" | 3/32" | 1/4" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 0000 | |
| 1/4" | 1/2" | 1/8" | 1/2" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 0000 | |
| 3/8" | 9/16" | 3/32" | 1/2" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 3/8" | 5/8" | 1/8" | 1/2" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 00000 | |
| 1/2" | 3/4" | 1/8" | 3/4" | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 000000 | 00000 | |
| 3/4" | 1" | 1/8" | 1" | 3 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 00000 | |
Metric | |||||||||
| 1mm | 3mm | 1mm | 9mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 3mm | 5mm | 1mm | 15mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 4mm | 6mm | 1mm | 18mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 5mm | 7mm | 1mm | 21mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 6mm | 8mm | 1mm | 24mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 6mm | 10mm | 2mm | 30mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 9mm | 11mm | 1mm | 33mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 9mm | 13mm | 2mm | 39mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 10mm | 13mm | 1.5mm | 39mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 14mm | 16mm | 1mm | 48mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 0000 | |
| 16mm | 20mm | 2mm | 48mm | 5 psi @ 72° F | UL 94 V-0, UL 94 V-1 | Brown | 0000000 | 00000 | |
Hard Plastic Tubing for Vehicle Air Systems
- Semi-Flexible
- Compatible with Compression and Push to Connect Tube Fittings
- Hard (Durometer 65D)
- Temperature Range: -40° to 200° F
Safely power seat controls, horns, and other vehicle parts with compressed air. This tubing meets SAE or D.O.T. testing and performance standards for use in air-powered vehicle systems. It’s opaque, so you can’t see what’s flowing through the line. Semi-flexible, it’s good for gradual bends.
Tubing that meets D.O.T. FMVSS 106 is rated for use in motor vehicle brake systems. It’s also known as air brake tubing.
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Specifications Met | Color | Length, ft. | Per Ft. | |
Opaque Nylon Plastic | |||||||||
|---|---|---|---|---|---|---|---|---|---|
With Yarn Reinforcement | |||||||||
| 1/4" | 3/8" | 1/16" | 1 1/2" | 150 psi @ 72° F | D.O.T. FMVSS 106, SAE J844 Type B | Brown | 100 | 0000000 | 00000 |
High-Temperature Firm Rubber Tubing for Chemicals
- Flexible
- Compatible with Barbed Tube Fittings
- Firm (Durometer 75A)
- Temperature Range: -10° to 400° F
Made of resilient Viton® fluoroelastomer, this tubing can stand up to high-temperature chemical applications. It has the chemical resistance to withstand a variety of acids and other harsh substances. Tubing bends easily around objects and can handle continuous flexing, so it is suitable for applications requiring movement, such as metering (peristaltic) pumps and robotics. Tubing is opaque, so you cannot see inside the line.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Color | Lengths, ft. | Per Ft. | |
Opaque Viton® Fluoroelastomer Rubber | ||||||
|---|---|---|---|---|---|---|
Inch | ||||||
| 1/16" | 1/8" | 1/32" | Brown | 0000000 | 00000 | |
| 1/8" | 1/4" | 1/16" | Brown | 0000000 | 0000 | |
| 1/8" | 5/16" | 3/32" | Brown | 0000000 | 0000 | |
| 1/8" | 3/8" | 1/8" | Brown | 0000000 | 00000 | |
| 3/16" | 5/16" | 1/16" | Brown | 0000000 | 0000 | |
| 3/16" | 7/16" | 1/8" | Brown | 0000000 | 00000 | |
| 1/4" | 5/16" | 1/32" | Brown | 0000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | Brown | 0000000 | 0000 | |
| 1/4" | 1/2" | 1/8" | Brown | 0000000 | 00000 | |
| 5/16" | 7/16" | 1/16" | Brown | 0000000 | 0000 | |
| 5/16" | 9/16" | 1/8" | Brown | 0000000 | 00000 | |
| 3/8" | 1/2" | 1/16" | Brown | 0000000 | 00000 | |
| 3/8" | 9/16" | 3/32" | Brown | 0000000 | 00000 | |
| 3/8" | 5/8" | 1/8" | Brown | 0000000 | 00000 | |
| 1/2" | 5/8" | 1/16" | Brown | 0000000 | 00000 | |
| 1/2" | 3/4" | 1/8" | Brown | 0000000 | 00000 | |
| 3/4" | 7/8" | 1/16" | Brown | 0000000 | 00000 | |
| 3/4" | 1" | 1/8" | Brown | 0000000 | 00000 | |
Metric | ||||||
| 2mm | 4mm | 1mm | Brown | 0000000 | 0000 | |
| 4mm | 6mm | 1mm | Brown | 0000000 | 0000 | |
| 6mm | 8mm | 1mm | Brown | 0000000 | 0000 | |
| 8mm | 10mm | 1mm | Brown | 0000000 | 00000 | |
| 10mm | 12mm | 1mm | Brown | 0000000 | 00000 | |
Hard Plastic Tubing for Fuel
Hard walls give this tubing the strength to handle high-pressure fuel and gasoline applications. It is nylon, which has excellent abrasion resistance. This tubing can be brittle, so take care as you're handling it. To ensure a good connection when installing fittings, trim damaged tube ends with a plastic tube cutter (sold separately).
Opaque tubing keeps you from seeing inside the tubing. This tubing is designed for high-temperature applications. It has a chemical-resistant nylon core that is reinforced with high-strength yarn. The protective nylon cover resists UV light.
For technical drawings and 3-D models, click on a part number.
- Flexible
- Compatible with Compression Tube Fittings
- Hard
- Temperature Range: -50° to 266° F
For OD | ||||
|---|---|---|---|---|
| Min. | Max. | Length | Each | |
| 1/8" | 3/4" | 4 1/2" | 0000000 | 000000 |
Bend-and-Stay Very Flexible Duct Hose for Dust
- Very Flexible
- Compatible Clamps: Worm-Drive Clamps
- Color: Brown or White
- Temperature Range: -4° to 175° F
Bend this hose in any direction and it will hold its shape without support. Create longer lengths by twisting one end of the hose into another—no need for a duct hose connector or clamp.
Warning: Hose should not be used for applications that generate a static charge.
Spiral | Per Ft. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Bend Radius | Compresses To | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Direction | Material | Max. Continuous Lg., ft. | 1-19 | 20-Up | |
Brown Polypropylene | |||||||||||||
| 1 1/2" | 1 5/8" | 1" | 35% | 22 in. of Hg @ 72° F | 20 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 00000 | 00000 |
| 2" | 2 1/4" | 1" | 35% | 21 in. of Hg @ 72° F | 13 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 0000 | 0000 |
| 2 1/2" | 2 13/16" | 1" | 35% | 19 in. of Hg @ 72° F | 10 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 0000 | 0000 |
| 3" | 3 3/16" | 1" | 35% | 18 in. of Hg @ 72° F | 10 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 0000 | 0000 |
| 4" | 4 3/16" | 1" | 35% | 13 in. of Hg @ 72° F | 8 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 00000 | 0000 |
| 5" | 5 3/16" | 2" | 35% | 10 in. of Hg @ 72° F | 7 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 00000 | 0000 |
| 6" | 6 1/4" | 2" | 35% | 7 in. of Hg @ 72° F | 6 psi @ 72° F | 0.015" | Ribbed | Left Hand | Metal | 20 | 000000000 | 00000 | 00000 |
Fittings screw over the end of duct hose to connect equipment.
ID | OD | |||||
|---|---|---|---|---|---|---|
| For Hose ID | A | B | A | B | Each | |
Brown EPDM Rubber | ||||||
| 1 1/2" | 1 5/8" | 1 1/2" | 1 7/8" | 1 3/4" | 000000000 | 00000 |
| 2" | 2 1/4" | 2" | 2 7/16" | 2 3/16" | 000000000 | 00000 |
| 2 1/2" | 2 13/16" | 2 1/2" | 2 15/16" | 2 13/16" | 000000000 | 00000 |
| 3" | 3 3/16" | 3" | 3 7/16" | 3 3/16" | 000000000 | 00000 |
| 4" | 4 3/16" | 4" | 4 7/16" | 4 3/16" | 000000000 | 00000 |
| 5" | 5 3/16" | 5" | 5 1/2" | 5 3/16" | 000000000 | 00000 |
| 6" | 6 1/4" | 6" | 6 7/16" | 6 1/8" | 000000000 | 00000 |
White EPDM Rubber | ||||||
| 1 1/2" | 1 5/8" | 1 1/2" | 1 7/8" | 1 3/4" | 000000000 | 0000 |
| 2" | 2 1/4" | 2" | 2 7/16" | 2 3/16" | 000000000 | 00000 |
| 2 1/2" | 2 13/16" | 2 1/2" | 2 15/16" | 2 13/16" | 000000000 | 00000 |
| 3" | 3 3/16" | 3" | 3 7/16" | 3 3/16" | 000000000 | 00000 |
| 4" | 4 3/16" | 4" | 4 7/16" | 4 3/16" | 000000000 | 00000 |
| 5" | 5 3/16" | 5" | 5 1/2" | 5 3/16" | 000000000 | 00000 |
| 6" | 6 1/4" | 6" | 6 7/16" | 6 1/8" | 000000000 | 00000 |
Moisture-Seal Heat-Shrink Tubing
Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface. Choose tubing with a larger shrink ratio to cover irregularly shaped objects or cable assemblies that have a large size difference between the cable and connector.
Semi-rigid tubing bends only slightly. SAE AMS-DTL-23053/4 Class 1 tubing meets requirements for material quality and color.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Material: Polyolefin Plastic
- Dielectric Strength: 900 V/mil
- Shrink Temperature: 275° F
- Temperature Range: -65° to 230° F
- Specifications Met: SAE AMS-DTL-23053/4 Class 1, UL Recognized
ID | 4 ft. Lg. | |||||
|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Flexibility | Color | Each | |
| 0.13" | 0.02" | 0.04" | Semi-Rigid | Brown | 00000000 | 000000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
| 0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 82 | 1/2ft. | 2:1, 2.5:1 | 195° to 340° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 0000000 |
| 0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes) | 181 | 1", 1/2ft. | 1.2:1, 1.5:1, 2:1, 2.5:1, 3:1 | 195° to 485° | Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow | 00000000 | 000000 |
| 0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 000000 |