Transfer and spray water at low pressures.

No clamps or banding are needed to secure fittings to this hose; the more you pull on the fittings, the tighter the hose will grip.

Wash down equipment in food-processing plants, dairies, and other facilities with hot water.

Also known as furnace door hose, this water hose has a resin-coated fiberglass cover that withstands intermittent heat up to 1,000° F and splashes of molten metal and glass.

The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

Yarn reinforcement gives this hose good strength under pressure.

Attach barbed fittings to this hose for use in low-pressure air applications.

An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.

Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.

This hose meets CGA (Compressed Gas Association) standards for use with oxygen and acetylene gas.

With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.

Metal hose fittings have better durability than plastic barbed hose fittings.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.

The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.

Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.

With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.

A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.

Compatible with Schrader-shape plugs and sockets.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.

Also known as Chicago and universal couplings, these have identical claw-style heads and connect by being pushed together with a quarter twist.

Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.

Fittings meet NSF/ANSI Standard 61 for drinking water. Attach them to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

These two-piece couplings thread together to create an access point within a garden hose line. The threaded design allows for a more secure hold at the point of connection than quick-disconnect and cam-and-groove garden hose couplings.

Made of stainless steel, these hose fittings are more durable than plastic barbed hose fittings and have excellent corrosion and chemical resistance. Slide the barbed end into hose and secure with a clamp.

Made of plastic, these fittings are lighter in weight than metal barbed fittings, yet have the chemical and corrosion resistance to stand up to harsh substances. Slide the barbed end into plastic or rubber hose and secure with a clamp.

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Connect your hose to a cam-and-groove vapor recovery valve.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

A single rounded bead grips onto hose just like a barb, but has no sharp edges that could cut or damage soft hose. Slide the beaded end into hose and secure with a clamp. Use in coolant applications up to 300 psi.

Reduce the risk of spills near electronics when connecting and disconnecting liquid cooling lines. Also known as double shut-off couplings, these couplings have a shut-off valve on both sides that stops the flow of coolant if they’re separated.

Also known as ground-joint couplings and boss couplings, these fittings are designed for high-pressure steam applications up to 600 psi. Insert the barbed end of the fitting into hose, then position the interlocking clamp over the hose and bolt into place. The clamp firmly grips your hose as it locks into the ring of the barbed end, creating a leak-tight seal.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

To stand up to the harsh chemicals used to clean food-processing lines, these fittings are made of PVDF, also known as Kynar.

Made of ductile iron, these couplings are tough enough to handle sand, cement, and other abrasive solids and slurries. Use their cam-and-groove fittings to quickly connect and disconnect medium- to large-diameter hose lines.

Adjust the flow while dispensing liquid chemicals.

A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

Use this tubing in high-temperature applications up to 390° F.

Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.

Stretch it, bend it, compress it – this tubing will spring back to its original shape.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.

Multiple colors allow you to color-code your line for easy identification.

With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.

This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.

Static electricity will not build up in this tubing, so you can use it near sensitive equipment.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

Tough and durable, this tubing resists abrasion and tearing.

Use this general purpose tubing with a variety of chemicals.

Use this resilient tubing in high-temperature chemical applications up to 400° F.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

An FEP liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning unrestricted flow.

With the best oil resistance of all our fuel and lubricant tubing, this tubing won’t deteriorate or become brittle when exposed to oil—even with long-term use.

The industry standard for fuel and lubricant applications, this tubing can be used intermittently with petroleum-based products without becoming hard or brittle.

Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.

Tubing meets NSF/ANSI Standard 61 for drinking water.

Drain water from washing machines and dishwashers.