We will reply to your message within an hour.
Attach barbed fittings to this hose for use in low-pressure air applications.
Designed for areas where space is limited, these reels have the smallest overall size of all our reels.
Hose is PVC, so it’s lighter and less cumbersome than rubber hose.
Protect your hose when it’s not in use.
Turn the handle to rewind the hose.
An extra-strong yarn reinforcement gives this hose excellent durability to handle higher pressures than standard air hose.
Transfer compressed air that’s up to 500 psi—this hose has extra-strong yarn reinforcement for excellent durability.
Identify your air lines by color.
The rubber cover meets MSHA (Mine Safety and Health Administration) standards for flame resistance, so this hose is often used to transfer highly compressed air in robotic welding systems.
Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.
Prevent electrostatic discharge (ESD) while moving compressed air in dry environments, such as when powder coating or spray painting.
Also known as hot air blower hose, this hose stays flexible and strong as it transfers compressed air at temperatures above 300° F.
Made of PVC, this hose stays flexible in temperatures as low as -65° F.
Hose is polyurethane so it stretches and flexes more than nylon retracting hose.
Create a retracting air line that meets your needs.
Made of thick, rigid nylon, this hose has excellent durability and the highest pressure rating of the retracting hose we offer.
Supply air to two power tools without worrying about your lines getting tangled.
Safely deliver compressed air to brakes in semitrucks, trailers, and other vehicles with this D.O.T. certified hose. Made of flexible nylon, it will bounce back to its coiled form even after long periods of use.
With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.
Bend this hose around obstructions and corners, and the aluminum tube reinforcement holds its shape.
Made of Buna-N, this hose won't break down from oil, so you can run lubricated air to power tools.
A female fitting on one end swivels until tightened, making it easy to install without rotating the entire hose.
Use this neoprene hose in temperatures up to 210° F.
Hose is PVC, so it’s light and easy to handle.
Made of polyurethane, this hose stands up to the wear and tear of daily use.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.
A braided exterior protects this hose from abrasion and over-bending. Also known as bellows, the ribbed interior makes it flexible enough to connect high-vacuum components that aren't directly aligned.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Often found in semiconductor manufacturing and other demanding industrial applications, this hose handles nearly perfect vacuum.
Also known as air brake hose, this hose safely powers brakes in semitrucks, trailers, and other vehicles with compressed air.
Metal hose fittings have better durability than plastic barbed hose fittings.
Eliminate sharp bends at the end of your air and water hose—these fittings have a built-in kink absorber.
Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.
Low-profile barbs and a longer first barb allow for a smoother, easier installation than other barbed fittings. Slide the barbed end into hose and secure with a clamp.
Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.
The female connector screws directly onto the hose without the need for a separate adapter. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.
Connect these fittings to air tools for pneumatic applications.
The industry standard for quick-disconnect couplings, these are also known as industrial interchange couplings. Compatible with Industrial-shape plugs and sockets.
Couplings allow for maximum flow because there's no shut-off valve in the plug or the socket. Compatible with Open-Flow-shape plugs and sockets.
Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru-Flate, and European.
Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.
Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.
Compatible with ARO-shape plugs and sockets.
With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.
Compatible with Lincoln-shape plugs and sockets.
Made of acetal, these couplings are lighter in weight than metal quick-disconnect couplings. Compatible with Plastic-shape plugs and sockets.
A slim body allows these couplings to fit into tight spaces. Compatible with Compact-shape plugs and sockets.
Compatible with Japanese-shape plugs and sockets.
Compatible with Schrader-shape plugs and sockets.
Compatible with Ring-Lock-shape plugs and sockets.
Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.
Couplings have a spring-loaded locking sleeve that automatically locks into place to prevent accidental disconnection. The identical claw-style head connects to another spring-lock twist-claw hose coupling with a quarter twist.
Couplings are only compatible with other extra-large twist-claw hose couplings. Use with tools and equipment up to 2 pipe size.
Also known as Chicago and universal couplings, these have identical claw-style heads and connect by being pushed together with a quarter twist.
These couplings have a lower profile than other claw-style couplings to fit in cramped spaces. They consist of a plug and a socket that connect with a quarter twist. Also known as Bowes couplings.
Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.
Use these CGA fittings to connect welding hose to pressure regulators and torches.
Also known as CGA nuts, these are designed for low-pressure welding applications downstream of your pressure regulator. Attach them to barbed hose fittings for compressed gas to make a threaded connection to torches or pressure regulators.
Commonly used in low-pressure welding applications, these fittings connect downstream of your pressure regulator. Slide the barbed end into hose and secure with a crimp-on hose ferrule.
These nuts attach to high-pressure nipples for compressed gas so you can connect your tank to the inlet of a pressure regulator.
Commonly used in high-pressure welding applications, these nipples connect your tank to the inlet of a pressure regulator. One side has a threaded pipe end and the other side has a rounded end that sits inside a threaded nut to make a threaded connection.
Designed to handle high-pressure welding applications, these CGA fittings are commonly used to connect pressure regulators to compressed gas tanks or cylinders.
Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.
A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.
This general purpose tubing is the industry standard for air and water applications.
Use this tubing in high-temperature applications up to 390° F.
This tubing won’t degrade when exposed to the damaging effects of UV light.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Thick walls give this tubing excellent abrasion resistance.
Stretch it, bend it, compress it – this tubing will spring back to its original shape.
To identify lines at a glance, use different colored tubing as a color code.
This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.
Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.
This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.
Multiple colors allow you to color-code your line for easy identification.
A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
With a unique combination of UV resistance and clarity, this tubing won’t degrade from the damaging effects of ultraviolet light exposure, and allows you to monitor flow through the line.
This multiple-line tubing holds together on its own, so there's no need for cable ties or tape.
Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.
Static electricity will not build up in this tubing, so you can use it near sensitive equipment.
Use this micro-sized tubing for delicate, precision applications.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
This tubing maintains its flexibility, even when temperatures drop to -100° F.
An inner liner releases silver ions to inhibit the growth of bacteria, mold, fungi, and other odor-causing microbes.
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
Safely power seat controls, horns, and other vehicle parts with compressed air.
This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.
Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.
This resilient tubing won’t crack due to stress or impact.
To protect sensitive equipment, this tubing is made of nylon that’s specially formulated to let currents pass through, preventing static electricity buildup.
Made of moisture-resistant plastic, this tubing won't soften and lose strength, even in high-humidity environments.
Made from PFA plastic, this tubing keeps condensation from forming by diffusing water vapor.
Designed for high-purity processes, this tubing is made without plasticizers like DEHP that can contaminate the fluid passing through it.
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.
This tubing has a seamless construction with no weld bead for unrestricted flow and is stronger than welded tubing.
When your application does not require a smooth interior, this tubing is an economical choice.
This tubing is made to tighter tolerances than other stainless steel tubing.
A titanium additive gives this tubing excellent strength and superior corrosion resistance. It meets MIL-T-8808.
This tubing is suitable for extreme-pressure applications reaching 15,000 psi—the highest pressure rating of all the tubing we offer.
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside.
Compared to other stainless steel tubing, this tubing is harder, stronger, and more durable.
Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.
Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.
This tubing withstands high pressures up to 13,700 psi. It is also known as capillary tubing.
The outside of this tubing is polished to a high-luster finish for a shiny appearance.
This tubing has a 90° bend that holds its shape.
Aluminum tubing is lightweight with good corrosion resistance and weldability.
Bend this tubing into the shape you need without special tools or elbow fittings.
Unlike other aluminum tubing, this tubing is rigid and will not bend.
Move bulk material, exhaust gas, or suck up dust in powerful vacuum systems—this tubing is large enough to transfer pellets and debris and strong enough to withstand nearly perfect vacuum. Made of aluminum, it’s lighter weight than steel tubing, so it’s best when you need to reduce the weight of your system. It also resists corrosion from frequent rinsing, humidity, and rain.
This tubing meets MIL-T-7081 standards.
A soft metal frequently used with air, gasoline, natural gas, propane, and plumbing applications. Tubing is not as corrosion resistant as stainless steel.
Copper tubing has good corrosion resistance and excellent heat transfer qualities.
Often used in heating and cooling systems, this tubing insulates refrigerant to efficiently transfer heat between components.
Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It can be flared without splitting.
This tubing has the strength to withstand vacuum applications up to 29" Hg.
This tubing can withstand temperatures up to 1200° F—the highest temperature rating of all the non-stainless steel tubing we offer. It is also known as Inconel.
Seamless construction with no weld bead gives this tubing an interior with unrestricted flow. It is stronger than welded tubing and can be flared without splitting.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Super thin and lightweight, this hose is economical and rolls up for easy disposal.
Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.
Transfer material from sifters, feeders, and strainers to other parts of your sanitary line with these hose lengths and fittings.
Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system.
Build a compressed air system in half the time it would take to build a copper or steel system.
Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kits contain lengths of hose, nozzles, valves, and caps.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kit contains lengths of hose, nozzles, connectors, and assembly pliers.
This hose is made of steel.
Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.
Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.
Draw coolant from your existing tank.
These nozzles handle coolant pressure up to 150 psi.
The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.
For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.
For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.
Press these nozzles into unthreaded holes.
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.