We will reply to your message within an hour.
More
Hose is SBR rubber, so it stands up to the wear and tear of daily use.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Expose this UHMW (ultra-high molecular weight) polyethylene hose to harsh physical conditions without worrying about it deteriorating or becoming brittle.
An EPDM cover guards this hose, so it won't tear if scraped or break down from ozone or UV light. Use it to move milk, syrup, meat, and other wet and food and beverages.
Strengthened with yarn, this hose handles high-pressure vacuum and suction without getting kinked or crushed.
Move flour, grain, rice, sugar, and other dry food through your line.
Transfer flour, grain, rice, sugar, and other dry food through lines connected by cam-and-groove fittings.
Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.
Commonly known as radiator hose, this hose is for low-pressure coolant applications.
With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Reinforced by aramid fabric, this silicone rubber hose handles higher temperatures than any other coolant hose we offer.
Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.
With a tighter bend radius than other petroleum hose, this hose can easily twist and turn around equipment.
More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.
Lightweight yet tough, this hose has an abrasion-resistant polyester cover.
Two heavy duty polyester covers protect this hose.
This general purpose tubing is the industry standard for air and water applications.
This tubing won’t degrade when exposed to the damaging effects of UV light.
Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.
Thick walls give this tubing excellent abrasion resistance.
Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.
An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.
The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
If you’re tight on storage space, this hose compresses down to a small size.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
The smooth interior prevents dust from getting trapped and building up inside the hose.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
This white hose makes dirt and other contaminants easy to spot.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Bend this hose in any direction and it will hold its shape without support.
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
The neoprene coating on this hose withstands continuous motion without weakening.
Hose meets UL 94 V-2 for flame retardance.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
Position this hose in any direction and it will hold its shape.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
Step on or drive over this hose without causing damage.
Run water, mist, oil, and other liquids through this hose.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.
A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.
Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.
With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.
A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.
Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.