Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

If you need to access your line frequently, the fittings on this hose connect and disconnect quickly.

Use this durable, flexible hose in pressures up to 5,000 psi. Its braided construction gives it the highest pressure rating of any chemical hose in our offering.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing.

No need for a gasket—this hose’s PTFE liner flares out as it passes through the flanges, so your line’s contents never touch the fittings.

Transfer harsh chemicals while reducing vibration that could damage pumps or other equipment.

Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops.

Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.

The fittings are a short length of tubing that inserts into the end of another tube fitting.

Also known as an instrumentation fittings, the Yor-Lok fitting has two sleeves (double ferrules) that bite into metal tubing for a strong seal. The tube stem fitting is a short length of tubing that inserts into the end of another tube fitting.

A braided exterior protects this hose from abrasion and over-bending. Also known as bellows, the ribbed interior makes it flexible enough to connect high-vacuum components that aren't directly aligned.

Often found in semiconductor manufacturing and other demanding industrial applications, this hose handles nearly perfect vacuum.

Sealed vacuum insulation and a reflective barrier inside this hose maintains the temperature of liquids as cold as -325° F. Similar to a thermos, this prevents heat transfer, so the exterior of the hose won’t freeze or form condensation. The tube stems on each end slide into tube fittings on a freezer or other equipment in your plant or laboratory.

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Couplings consist of a plug and a socket that connect more quickly than threaded garden hose couplings. To connect, insert the plug into the socket and press the levers down.

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Not only do these reels have very good corrosion resistance, they also have more support than medium duty reels, so you can pull the hose out at an angle.

When your application does not require a smooth interior, this tubing is an economical choice.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

Also known as hypodermic or needle tubing, this tubing has thin walls and is made to tight tolerances for use in precision applications.

The outside of this tubing is polished to a high-luster finish for a shiny appearance.

This tubing has a 90° bend that holds its shape.

Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.

Slide these connectors into the ends of duct hose and secure with a clamp.

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Make quick changeovers without sacrificing a tight seal.

To prevent removal, these clamps can only be loosened with a special bit or screwdriver.

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

The hose clamps in these assortments have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into hose and tube.

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Turn the slotted head screw to quickly release the band. These clamps have rounded edges and a smooth interior, so they won’t cut into hose and tube materials.

Prevent static charge buildup while securely connecting duct hose with a wire spiral.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

The most corrosion-resistant thin-wall conduit we offer, use this along walls and ceilings in food-processing and chemical plants.