How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Sleeving
More
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
About Duct Hose
More
About Hose
More
Self-Regulating Heated High-Pressure Braided
Chemical Hose with Female Threaded Fittings

- Environment Temperature Range: -20° to 150° F
- Material: PTFE with Vinyl Cover and 304 Stainless Steel Braid
- Color: Blue
- Both Fittings Swivel Until Tightened
Heat chemicals to prevent them from freezing or becoming too thick. With a self-regulating heating wire, the liquid inside this hose stays warm and keeps flowing. They have a built-in automatic controller that regulates the temperature inside the hose when the temperature of your environment changes. It also automatically adjusts the power output depending on the temperature of your space. Just plug the hose into an outlet to power it.
The hose is reinforced with a stainless steel braid for added strength and chemical resistance. A vinyl cover around the hose protects it from wear.
Watt Density, W/ft. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | ID | OD | Bend Radius | Maximum Pressure @ Temperature | Current at Full Load, A | @ 30° F | @ 50° F | @ 70° F | Voltage | Electrical Phase | Maximum Heat Output, °F | NEMA Style | Each | |
316 Stainless Steel 37° Flared UNF Female × 316 Stainless Steel 37° Flared UNF Female | ||||||||||||||
3/4"-16 × 3/4"-16 Thread Size | ||||||||||||||
| 10 | 3/8" | 5/8" | 5 3/4" | 4,000 psi @ 72° F | 0.26 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 0000000 |
| 25 | 3/8" | 5/8" | 5 3/4" | 4,000 psi @ 72° F | 0.65 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
| 50 | 3/8" | 5/8" | 5 3/4" | 4,000 psi @ 72° F | 1.3 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
1 1/16"-12 × 1 1/16"-12 Thread Size | ||||||||||||||
| 10 | 5/8" | 1" | 7 3/4" | 4,000 psi @ 72° F | 0.27 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
| 25 | 5/8" | 1" | 7 3/4" | 4,000 psi @ 72° F | 0.67 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
| 50 | 5/8" | 1" | 7 3/4" | 4,000 psi @ 72° F | 1.35 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
1 5/8"-12 × 1 5/8"-12 Thread Size | ||||||||||||||
| 10 | 7/8" | 1 1/4" | 9 1/2" | 4,000 psi @ 72° F | 0.28 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
| 25 | 7/8" | 1 1/4" | 9 1/2" | 4,000 psi @ 72° F | 0.71 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
| 50 | 7/8" | 1 1/4" | 9 1/2" | 4,000 psi @ 72° F | 1.41 | 8 | 6.5 | 3 | 120V AC | Single Phase | 70° | 5-15 | 0000000 | 00000000 |
Heated High-Pressure Wet-Food and Beverage Hose with Sanitary Fittings

- Temperature Range: 72° to 450° F
- Maximum Vacuum: 28" of Hg @ 70° F
- Material: PTFE with Vinyl Plastic Cover and 304 Stainless Steel Braid
- Color: Blue
- Environmental Rating: IP65
- Specifications Met: FDA Compliant 21 CFR 177.2600
Warm viscous food and beverages, such as syrup and honey, to keep it flowing even when the temperature drops. This hose is lined with heating wire. To regulate heat output, a built-in thermocouple measures the hose’s temperature and sends it to your temperature switch or controller (required but not included).
This hose is FDA compliant, so it’s safe to use with food. A stainless steel braid strengthens the hose and resists chemicals commonly found in cleaning processes for food plants. To prevent damage to the braid, a vinyl cover surrounds it. Rated IP65, this hose also seals out spraying water.
The fittings on this hose are also called tri-clamp fittings. They attach to other quick-clamp fittings with a gasket and a clamp.
| Flange OD | ID | OD | Bend Radius | Maximum Pressure | Thermocouple Type | Wire Connection Type | Voltage | Current, A | Each | |
10 ft. Lg. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
| 0.984" | 3/8" | 1/2" | 5" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 2.5 | 0000000 | 000000000 |
| 0.984" | 5/8" | 3/4" | 7" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 2.5 | 0000000 | 00000000 |
| 1.984" | 7/8" | 1" | 9" | 3,500 psi @ 450 ° F | J | Wire Leads | 120V AC | 2.5 | 0000000 | 00000000 |
25 ft. Lg. | ||||||||||
316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
| 0.984" | 3/8" | 1/2" | 5" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 6.25 | 0000000 | 00000000 |
| 0.984" | 5/8" | 3/4" | 7" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 6.25 | 0000000 | 00000000 |
| 1.984" | 7/8" | 1" | 9" | 3,500 psi @ 450 ° F | J | Wire Leads | 120V AC | 6.25 | 0000000 | 00000000 |
50 ft. Lg. | ||||||||||
316 Stainless Steel Quick-Clamp Sanitary | ||||||||||
| 0.984" | 3/8" | 1/2" | 5" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 12.5 | 0000000 | 00000000 |
| 0.984" | 5/8" | 3/4" | 7" | 4,000 psi @ 450 ° F | J | Wire Leads | 120V AC | 12.5 | 0000000 | 00000000 |
| 1.984" | 7/8" | 1" | 9" | 3,500 psi @ 450 ° F | J | Wire Leads | 120V AC | 12.5 | 0000000 | 00000000 |
Dust Caps and Plugs for Quick-Disconnect
Hose Couplings for Natural and LP Gas
To keep contaminants out of your gas line, add these dust caps and plugs to natural and LP gas couplings when they’re not connected. All work with couplings that are rated ANSI Z21.41/CSA 6.9 for use with gas fuel appliances.
Static-Dissipative Duct Hose with Fittings
Attached for Wood Chips and Plastic Pellets

- Flexible
- Color: Clear
- Temperature Range: -60° to 180° F
The hose's embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube. Hose is also for use with cardboard fibers. The walls are clear so you can monitor flow.
Fitting | Spiral | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | ID | OD | Bend Radius | Max. Vacuum | Max. Pressure | Material Thick. | Interior Surface Texture | Fitting Material | Fitting Color | Direction | Material | Surface Resistivity, ohm-cir. mil/ft. | 10 ft. | 15 ft. | 25 ft. | 50 ft. | |
Polyurethane | ||||||||||||||||||
| 1 1/2" | 1 7/8" | 1 1/2" | 1 7/8" | 1 1/2" | 15 in. of Hg @ 72 ° F | 8 psi @ 72 ° F | 0.032" | Ribbed | Vinyl | Black | Left Hand | Metal | 106 | 000000 | ||||
| 2" | 2 1/4" | 2" | 2 1/4" | 1 1/2" | 15 in. of Hg @ 72 ° F | 8 psi @ 72 ° F | 0.032" | Ribbed | Vinyl | Black | Left Hand | Metal | 106 | 000000 | ||||
Electrical-Insulating Tube Sleeving

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable. This sleeving is often used in motors, transformers, and generators. Made of coated fiberglass, it resists abrasion, acids, alkalies, and chemicals.
Vinyl-coated sleeving resists wax and alcohol. Sleeving is flame-rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
| ID | For Wire Gauge | For Wire Size | Wall Thick. | For Max. Voltage | Temperature Range, °F | Specifications Met | Color | 5 ft. | 10 ft. | 25 ft. | 50 ft. | |
Fiberglass Fabric with Vinyl Plastic Coating | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.09" | 12 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.11" | 10 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.12" | 9 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.13" | 8 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.17" | 6 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.21" | 4 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.26" | 2 | __ | 0.02" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.33" | 1/0 | __ | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.39" | 1/0 | 3/8" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.45" | 1/0 | 7/16" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.51" | 1/0 | 1/2" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.64" | 1/0 | 5/8" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 0.77" | 1/0 | 3/4" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
| 1.02" | 1/0 | 1" | 0.03" | 7,000V AC | 0° to 265° | UL Recognized Component, CSA Certified, UL 2556 VW-1 | Black | 0000000 | ||||
Drain Hose for Plumbing Fixtures
Drain water from washing machines and dishwashers. You’ll need a hose clamp to attach to your appliance.
Hose for washing machines and dishwashers does not come with a hose clamp to secure the hose to your appliance. Add a hook end fitting (sold separately) to hang the hose from the lip of a sink. You’ll need an additional hose clamp to attach the hook end fitting to the hose.
Mist Coolant/Air Dispensers

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.
Dispensers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Dispensing Tip | Coolant Inlet Hose | Replacement Nozzles | |||||||||||
| Lg. | Type | Material | Mount Type | Bend Radius | Lg | Material | Spray Type | Air Inlet Pressure, psi | Lg., ft. | Material | Each | Each | ||
For Use With Air, Coolant, Water | ||||||||||||||
| 12" | Flexible | Plastic | Magnetic | 3/4" | 1 1/4" | Brass | Medium | 85-125 | 4 | Vinyl Plastic | 0000000 | 0000000 | 0000000 | 000000 |
| 18" | Flexible | Plastic | Magnetic | 3/4" | 1 1/4" | Brass | Medium | 85-125 | 4 | Vinyl Plastic | 0000000 | 000000 | 0000000 | 000000 |
Flood Coolant Dispensers with Reservoir


These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.
Maximum flow rate and shut-off height are for water-soluble oil. Shut-off height is the maximum height to which the water-soluble oil can be pumped.
Nozzle | Reservoir | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., gal. | Max. Flow Rate | Max. Pressure, psi | Coolant Outlet Hose Lg. | Lg. | Type | Nozzle Material | O'all Ht. | Wd. | Dp. | Reservoir Material | Shut-Off Ht., ft. | For Max. SSU Viscosity Grade | Voltage | Features | Each | ||
For Use With Coolant, Water | |||||||||||||||||
| A | 1 | 108 gph @ 1 ft. of head | 5 | 6 ft. | 6" | Rigid | Polyethylene Plastic | 9 3/8" | 12" | 6" | Polypropylene Plastic | 11.5 | 100 | 120V AC | Adjustable Flow, Coolant Strainer | 00000000 | 0000000 |
| B | 5 | 210 gph @ 1 ft. of head | 4.3 | 6 ft. | 12" | Flexible | Acetal Plastic | 8 1/2" | 16 7/8" | 11 1/4" | Polyethylene Plastic | 10.2 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 000000 |
| B | 5 | 325 gph @ 1 ft. of head | 5.2 | 6 ft. | 12" | Flexible | Acetal Plastic | 8 1/2" | 16 7/8" | 11 1/4" | Polyethylene Plastic | 12.3 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 000000 |
| B | 5 | 500 gph @ 1 ft. of head | 7.5 | 6 ft. | 12" | Flexible | Acetal Plastic | 8 1/2" | 16 7/8" | 11 1/4" | Polyethylene Plastic | 17.3 | 300 | 120V AC | Adjustable Flow, Coolant Strainer, Baffle, On/Off Valve | 00000000 | 000000 |
Breathing Tubes for Supplied-Air Respirators

Keep clean, breathable air flowing from a respirator air supply hose to your hood or helmet by replacing worn or damaged breathing tubes. To maintain NIOSH approval, choose a breathing tube that is compatible with your respirator hood series.
| Manufacturer Model Number | Compatible With | For Use With | Retracted Lg. | Extended Lg. | Flexibility | Material | Color | Connection Style | Each | |
3M | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| BT-30 | 3M S-Series, 3M S-Series Premium | Solid Particles | 26" | 33 1/2" | Very Flexible | Vinyl Plastic | Black | Quick Turn | 00000000 | 0000000 |






























