About Hose
More
Lightweight Abrasion-Resistant Hydraulic Hose
with Male and Female Threaded Fittings
- Temperature Range: -40° to 210° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Nylon with Polyurethane Cover
- Color: Black
- Female Fittings Swivel Until Tightened
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The polyurethane cover makes it tough, while the nylon keeps it lightweight and flexible. This nylon hose bends twice as sharply as standard rubber hose, so it’s easier to route through tight spaces. The slipperiness of the polyurethane reduces noise when you feed this hose through pulleys on utility trucks, forklifts, and other equipment that moves. Safe for outdoor use, the polyurethane cover also protects this hose from UV and ozone damage.
The fittings come attached, so this hose is ready to connect to a male threaded fitting on one end and a female one on the other. The female fitting swivels until tightened, so you don’t need to rotate the entire hose during installation. Also known as a JIC (Joint Industrial Council) fitting, the female fitting meets SAE J514 dimensional standards. Both fittings are chrome plated to resist corrosion.
Reinforced with a braided fiber, this hose handles the pressures, temperatures, and chemicals involved in most hydraulic applications and meets SAE 100R7 and ISO 3949 standards. MSHA (Mine Safety and Health Administration) accepted, the cover has been tested for flame resistance.
For technical drawings and 3-D models, click on a part number.
Dash Size | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Thread Size | ID | OD | Hose | Fitting | Bend Radius | Max. Pressure | Manufacturer Series | 2 ft. | 3 ft. | 4 ft. | 6 ft. | |
Chrome-Plated Steel NPT Male × Chrome-Plated Steel 37° Flared UNF Female | |||||||||||||
Hose Meets SAE 100R7, ISO 3949, Female Fittings Meet SAE J514 | |||||||||||||
| 1/8 | 5/16"-24 | 1/8" | 3/8" | 02 | 02 | 1/2" | 3,000 psi @ 72° F | Parker 510D | 00000000 | ||||
| 1/4 | 7/16"-20 | 1/4" | 1/2" | 04 | 04 | 1 1/2" | 2,750 psi @ 72° F | Parker 510D | 00000000 | ||||
| 3/8 | 9/16"-18 | 3/8" | 11/16" | 06 | 06 | 2" | 2,250 psi @ 72° F | Parker 510D | 00000000 | ||||
| 1/2 | 3/4"-16 | 1/2" | 13/16" | 08 | 08 | 3" | 2,000 psi @ 72° F | Parker 510D | 00000000 | ||||
Lightweight Abrasion-Resistant Hydraulic Hose
- Temperature Range: -40° to 210° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Nylon with Polyurethane Cover, except 1" ID Hose is Polyester Plastic with Polyurethane Cover
- Color: Black
- Compatible Hose Fittings: Parker Series 51R (Screw On), Parker Series 56 (Crimp On)
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The polyurethane cover makes it tough, while either nylon or polyester keeps it lightweight and flexible. This hose bends twice as sharply as standard rubber hose, so it’s easier to route through tight spaces. The slipperiness of the polyurethane reduces noise when you feed this hose through pulleys on utility trucks, forklifts, and other equipment that moves. Safe for outdoor use, the polyurethane cover also protects this hose from UV and ozone damage.
Reinforced with a braided fiber, this hose handles the pressures, temperatures, and chemicals involved in most hydraulic applications and meets SAE 100R7 and ISO 3949 standards. MSHA (Mine Safety and Health Administration) accepted, the cover has been tested for flame resistance.
Attach crimp-on fittings to create a permanent, leak-tight connection. You’ll need a crimper. Hose that can be used with screw-on fittings can be assembled in the field. These fittings install with only a vise and a wrench.
For technical drawings and 3-D models, click on a part number.
Per Ft. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| ID | OD | Dash Size | Bend Radius | Max. Pressure | Manufacturer Series | For Hose Fitting Manufacturer Series | Max. Continuous Lg., ft. | 1-99 | 100-Up | |
Hose Meets SAE J517 100R7, ISO 3949 | ||||||||||
| 3/16" | 7/16" | 03 | 3/4" | 3,250 psi @ 72° F | 510D | Parker 51R (Screw On), Parker 56 (Crimp On) | 100 | 0000000 | 00000 | 00000 |
| 1/4" | 1/2" | 04 | 1 1/2" | 3,000 psi @ 72° F | 510D | Parker 51R (Screw On), Parker 56 (Crimp On) | 100 | 0000000 | 0000 | 0000 |
| 5/16" | 9/16" | 05 | 1 3/4" | 2,500 psi @ 72° F | 510D | Parker 56 (Crimp On) | 100 | 0000000 | 0000 | 0000 |
| 3/8" | 5/8" | 06 | 2" | 2,250 psi @ 72° F | 510D | Parker 51R (Screw On), Parker 56 (Crimp On) | 100 | 0000000 | 0000 | 0000 |
| 1/2" | 13/16" | 08 | 3" | 2,250 psi @ 72° F | 510D | Parker 51R (Screw On), Parker 56 (Crimp On) | 100 | 0000000 | 0000 | 0000 |
| 3/4" | 1 1/16" | 12 | 6" | 1,250 psi @ 72° F | 510D | Parker 56 (Crimp On) | 100 | 0000000 | 00000 | 0000 |
| 1" | 1 5/16" | 16 | 8" | 1,000 psi @ 72° F | 510D | Parker 56 (Crimp On) | 100 | 00000000 | 00000 | 00000 |
Lightweight Abrasion-Resistant Hydraulic Hose with Female Threaded Fittings
- Temperature Range: -40° F to 210° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Nylon with Polyurethane Cover
- Color: Black
- Both Fittings Swivel Until Tightened
Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. The polyurethane cover makes it tough, even under pressure, while the nylon keeps it lightweight and flexible. This nylon hose bends twice as sharply as standard rubber hose, so it’s easier to route through tight spaces. The slipperiness of the polyurethane reduces noise when you feed this hose through pulleys on utility trucks, forklifts, and other equipment that moves. Safe for outdoor use, the polyurethane cover also protects this hose from UV and ozone damage.
It comes with female threaded fittings already attached, so it’s ready to use right out of the box. Both fittings swivel until tightened, so you don’t need to rotate the entire hose during installation. Also known as JIC (Joint Industrial Council) fittings, the fittings meet SAE J514 dimensional standards. They’re chrome plated to resist corrosion.
Reinforced with a braided fiber, this hose handles the pressures, temperatures, and chemicals involved in most hydraulic applications and meets SAE 100R7 and ISO 3949 standards. MSHA (Mine Safety and Health Administration) accepted, the cover has been tested for flame resistance.
For technical drawings and 3-D models, click on a part number.
Dash Size | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | ID | OD | Hose | Fitting | Bend Radius | Max. Pressure | Manufacturer Series | 1 ft. | 1 1/2 ft. | 2 ft. | 2 1/2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 8 ft. | 10 ft. | 12 ft. | 20 ft. | 25 ft. | |
Chrome-Plated Steel 37° Flared UNF Female × Chrome-Plated Steel 37° Flared UNF Female | |||||||||||||||||||||
Hose Meets SAE 100R7, ISO 3949, Fittings Meet SAE J514 | |||||||||||||||||||||
| 5/16"-24 × 5/16"-24 | 1/8" | 3/8" | 02 | 02 | 1/2" | 3,000 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
| 7/16"-20 × 7/16"-20 | 3/16" | 7/16" | 03 | 04 | 3/4" | 3,000 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
| 7/16"-20 × 7/16"-20 | 1/4" | 1/2" | 04 | 04 | 1 1/2" | 2,750 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
| 1/2"-20 × 1/2"-20 | 5/16" | 9/16" | 05 | 05 | 1 3/4" | 2,500 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
| 9/16"-18 × 9/16"-18 | 3/8" | 11/16" | 06 | 06 | 2" | 2,250 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
| 3/4"-16 × 3/4"-16 | 1/2" | 13/16" | 08 | 08 | 3" | 2,000 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
| 1 1/16"-12 × 1 1/16"-12 | 3/4" | 1 1/16" | 12 | 12 | 6" | 1,250 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||
Lightweight Abrasion-Resistant Hydraulic Hose with Male Threaded Fittings
- Temperature Range: -40° to 210° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Nylon with Polyurethane Cover
- Color: Black
Made of nylon with a polyurethane cover, this hose is half the weight but 240 times better at resisting wear and tear than our standard rubber hydraulic hose. The nylon also means it can bend twice as sharply, so it’s easier to route through tight spaces. The slipperiness of the polyurethane reduces noise when you feed this hose through pulleys on utility trucks, forklifts, and other equipment that moves. Safe for outdoor use, the polyurethane cover also protects this hose from UV and ozone damage.
The male threaded fittings come already attached to save you time. They’re chrome plated to resist corrosion.
Reinforced with a braided fiber, this hose handles the pressures, temperatures, and chemicals involved in most hydraulic applications and meets SAE 100R7 and ISO 3949 standards. MSHA (Mine Safety and Health Administration) accepted, the cover has been tested for flame resistance.
For technical drawings and 3-D models, click on a part number.
Dash Size | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | ID | OD | Hose | Fitting | Bend Radius | Max. Pressure | Manufacturer Series | 1 ft. | 1 1/2 ft. | 2 ft. | 2 1/2 ft. | 3 ft. | 4 ft. | 5 ft. | 6 ft. | 7 ft. | 8 ft. | 9 ft. | 10 ft. | 12 ft. | 15 ft. | 20 ft. | 25 ft. | 50 ft. | |
Chrome-Plated Steel Threaded NPT Male × Chrome-Plated Steel Threaded NPT Male | |||||||||||||||||||||||||
Hose Meets SAE 100R7, ISO 3949 | |||||||||||||||||||||||||
| 1/8 × 1/8 | 1/8" | 3/8" | 02 | 02 | 1/2" | 3,000 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
| 1/8 × 1/8 | 3/16" | 7/16" | 03 | 02 | 3/4" | 3,000 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
| 1/4 × 1/4 | 1/4" | 1/2" | 04 | 04 | 1 1/2" | 2,750 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
| 1/4 × 1/4 | 5/16" | 9/16" | 05 | 04 | 1 3/4" | 2,500 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
| 3/8 × 3/8 | 3/8" | 11/16" | 06 | 06 | 2" | 2,250 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
| 1/2 × 1/2 | 1/2" | 13/16" | 08 | 08 | 3" | 2,000 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
| 3/4 × 3/4 | 3/4" | 1 1/16" | 12 | 12 | 6" | 1,250 psi @ 72° F | Parker 510D | 0000000 | |||||||||||||||||
Nonconductive Lightweight Hydraulic Hose
- Temperature Range: -40° to 210° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Nylon with Polyurethane Cover
- Color: Orange
- Compatible Hose Fittings: Parker Series 51R (Screw On), Parker Series 56 (Crimp On)
Prevent electrical shock and damage to equipment while moving hydraulic fluid near high voltages. Often found on bucket trucks used for power line work, this hose is made of nylon, so it won’t conduct electricity. It’s half the weight and bends twice as sharply as our standard rubber hydraulic hose, so it’s easier to move and route through tight spaces. Thanks to its polyurethane cover, it also resists wear and tear 240 times better than standard rubber hydraulic hose and stays strong under pressure. The polyurethane cover is slippery to minimize noise when this hose is fed through pulleys on utility trucks, forklifts, and other equipment that moves. Safe for outdoor use, the cover also protects it from UV and ozone damage. Braided fiber reinforces this hose, giving it enough strength to handle the pressure involved in most hydraulic applications and helping it meet SAE 100R7 and ISO 3949 standards.
Hose for screw-on fittings can install with only a vise and a wrench—no crimper needed. Use them to make hose assemblies in the field.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Dash Size | Bend Radius | Max. Pressure | Manufacturer Series | For Hose Fitting Manufacturer Series | Lengths, ft. | Per Ft. | |
Hose Meets SAE J517 100R7, ISO 3949 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8" | 5/16" | 02 | 1/2" | 3,150 psi @ 72° F | Parker 518D | Parker 56 (Crimp On) | 0000000 | 00000 | |
| 3/16" | 7/16" | 03 | 3/4" | 3,250 psi @ 72° F | Parker 518D | Parker 51R (Screw On), Parker 56 (Crimp On) | 0000000 | 0000 | |
| 1/4" | 1/2" | 04 | 1 1/2" | 3,150 psi @ 72° F | Parker 518D | Parker 51R (Screw On), Parker 56 (Crimp On) | 0000000 | 0000 | |
| 5/16" | 9/16" | 05 | 1 3/4" | 3,150 psi @ 72° F | Parker 518D | Parker 56 (Crimp On) | 0000000 | 0000 | |
| 3/8" | 5/8" | 06 | 2" | 3,000 psi @ 72° F | Parker 518D | Parker 51R (Screw On), Parker 56 (Crimp On) | 0000000 | 0000 | |
| 1/2" | 13/16" | 08 | 3" | 3,000 psi @ 72° F | Parker 518D | Parker 51R (Screw On), Parker 56 (Crimp On) | 0000000 | 0000 | |
| 3/4" | 1 1/16" | 12 | 5" | 1,650 psi @ 72° F | Parker 518D | Parker 56 (Crimp On) | 0000000 | 00000 | |