Hot Taps | McMaster-Carr

Filter by

System of Measurement

Pipe Size

Material

Pipe Material

Fitting Connection

Quick-Disconnect Clamp

Connects To

Shape

For Pipe OD

For Use With

Sodium Hydroxide (Caustic Soda)

Water

Maximum Pressure @ Temperature

Pipe Schedule

Tube OD

3/8" to 1 5/16"

1 1/2" to 2"

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

Compliant with Exemptions

Not Compliant

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

2B999

EAR99

DFARS Specialty Metals

Exempt

Component

Fitting

Saddle

Maximum Steam Pressure @ Temperature

Copper Tube Size

Number of Pieces

Length

Finish

Color

Hole Diameter

177 Products

Pressurized Pipe Tapping Kits

Add a new branch to pressurized water and steam lines without costly downtime. No need to shut off flow and empty the line. With these kits, you can safely cut holes in pipes while they’re still under pressure. Attach them at any angle around the pipe to route a new branch in any direction. They’re lightweight enough for one person to operate by hand.

These kits include a drill bit pilot with wire or retaining magnets to catch cutout pieces of pipe, so they won’t fall into your line. Before cutting into pipe, attach a saddle tap tee and on/off valve (both not included) to seal the section where you intend to cut. Insert the tapping kit through the open valve, cut the hole with your drill, and then close the valve before removing the kit to prevent fluid from spraying out.

NPT Threaded Connection

For Pipe Size	For Pipe Material	For Max. Pressure @ Temp.	For Maximum Steam Pressure @ Temperature	No. of Pieces	Includes		Each
1/2 to 2	Steel, Stainless Steel, Aluminum, Plastic, Iron, Fiberglass	100 psi @ 72° F	100 psi @ 350° F	18	Pipe Tapping Body Assembly Threaded Adapters (One each: 1/2 NPT, 3/4 NPT, 1 NPT, 1 1/4 NPT, 1 1/2 NPT, 2 NPT) Hole Saws (One each: 5/8" Dia., 7/8" Dia., 1 1/8" Dia., 1 3/8" Dia., 1 7/8" Dia.) Hole Saw Arbor with Pilot Drill for 5/8"-1 1/8" Dia. Hole Saws Hole Saw Arbor with Pilot Drill for 1 3/8"-1 7/8" Dia. Hole Saws 1/2" Size × 20" Lg. Drill Bit 1/4" Size × 4" Lg. Drill Bit Pilot with Wire 18" Lg. Extension 1/8" Hex L-Key	8825N12	000000000
3/4 to 4	Steel, Copper, Brass, Aluminum	300 psi @ 72° F	15 psi @ 350° F	22	Pipe Tapping Body Assembly Hole Saws (One each: 5/8" Dia., 7/8" Dia., 1 1/8" Dia., 1 3/8" Dia., 1 3/4" Dia., 2 1/4" Dia., 3 1/4" Dia.) Hole Saw Arbor for 5/8"-3 1/4" Dia. Hole Saws 1/4" Size × 4 5/16" Lg. Drill Bit 1/4" Size × 4 1/2" Lg. Drill Bit Pilot with Wire 18" Lg. Extension 24" Lg. Extension 1/8" Hex L-Key 5/32" Hex L-Key Retaining Magnets (Three each: 3/8" Dia, 1/4" Dia.) 3-oz. Tube with NLGI Grade 2 Grease	8825N11	00000000

Flared Connection

For Copper Tube Size (Flared Connection)	For Pipe Material	For Max. Pressure @ Temp.	No. of Pieces	Includes		Each
3/4 to 1	Steel, Copper	Not Rated	11	Pipe Tapping Body Assembly Flared Adapters (One each: 3/4 CTS, 1 CTS) Hole Saws (One each: 11/16" Dia., 1" Dia.) 6 1/2" Lg. Adapter for 1" Dia. Hole Saw 1/4" Size × 3 3/16" Lg. Drill Bit Pilot 1 3/4" Lg. Extension 2 3/4" Lg. Extension 1/2" Square Drive 6-Point Socket 1/2" Square Drive Ratchet Wrench	8825N13	000000000
3/4 to 2	Plastic	Not Rated	16	Pipe Tapping Body Assembly Flared Adapters (One each: 3/4 CTS, 1 CTS, 1 1/2 CTS, 2 CTS) Hole Saws (One each: 3/4" Dia., 1" Dia., 1 1/2" Dia., 2" Dia.) 6 1/2" Lg. Adapter for 3/4" and 1" Dia. Hole Saws 7 1/16" Lg. Adapter for 1 1/2" and 2" Dia. Hole Saws 1/4" Size × 3 3/16" Lg. Drill Bit Pilot 1 3/4" Lg. Extension 2 3/4" Lg. Extension 1/2" Square Drive 6-Point Socket 1/2" Square Drive Ratchet Wrench	8825N14	00000000
3/4 to 2	Iron	Not Rated	16	Pipe Tapping Body Assembly Flared Adapters (One each: 3/4 CTS, 1 CTS, 1 1/2 CTS, 2 CTS) Hole Saws (One each: 3/4" Dia., 1" Dia., 1 1/2" Dia., 2" Dia.) 6 1/2" Lg. Adapter for 3/4" and 1" Dia. Hole Saws 7 1/16" Lg. Adapter for 1 1/2" and 2" Dia. Hole Saws 1/4" Size × 3 3/16" Lg. Drill Bit Pilot 1 3/4" Lg. Extension 2 3/4" Lg. Extension 1/2" Square Drive 6-Point Socket 1/2" Square Drive Ratchet Wrench	8825N15	00000000

Flared/Compression Connection

For Copper Tube Size (Flared Connection)	For Tube OD (Compression Connection)	For Pipe Material	For Max. Pressure @ Temp.	No. of Pieces	Includes		Each
3/4 to 2	1 1/2" to 2"	Plastic, Iron	Not Rated	22	Pipe Tapping Body Assembly Compression Adapters (One each: For 1 1/2" Tube OD, For 2" Tube OD) Flared Adapters (One each: 3/4 CTS, 1 CTS, 1 1/2 CTS, 2 CTS) Hole Saws (Two each: 3/4" Dia., 1" Dia., 1 1/2" Dia., 2" Dia.) 6 1/2" Lg. Adapter for 3/4" and 1" Dia. Hole Saws 7 1/16" Lg. Adapter for 1 1/2" and 2" Dia. Hole Saws 1/4" Size × 3 3/16" Lg. Drill Bit Pilot 1 3/4" Lg. Extension 2 3/4" Lg. Extension 1/2" Square Drive 6-Point Socket 1/2" Square Drive Ratchet Wrench	8825N16	000000000

Tap Valves

Also known as saddle valves, these self-piercing valves tap existing copper tubing lines so you can install a secondary water supply line to humidifiers, ice makers, and other equipment. Clamp the valve into position and turn the handle to pierce a _1/4" hole in the tubing. Do not use with pipe. The outlet connection is a _1/4" compression tube fitting.

								Overall
	For Tube OD	Connects To	Fitting Connection	Max. Pressure @ Temp.	Temp. Range, ° F	Port-to-Port Lg.	Valve Ht.	Ht.	Lg.	Valve Type	For Use With	For Tube Material		Each
Brass Body



		3/8" to 1 5/16"	Tube	Clamp	150 psi @ 180° F	35 to 180	2 3/8"	1 3/16"	3"	2 3/8"	Self-Piercing	Air, Water	Copper	4863K12	000000

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

Saddle Tap Tees with Gasket

Female × Clamp On

Saddle tap tees tap into existing pipe lines so you can install branch lines, valves, and other equipment. The gasket and clamps create a tight seal so the opening won’t leak. To install, shut down your line and secure the clamps, then drill a hole into the pipe.

	For Pipe Size (B)	For Pipe OD (B)	Material	Color	Max. Pressure @ Temp.	Gasket Material	Clamp Material		Each
NPT Female × Clamp On



	1/2	1 1/2, 1 1/4	1.66", 1.9"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K211	000000


	1/2	2	2 3/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K212	00000
	1/2	3	3 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K213	00000
	1/2	4	4 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K214	00000
	1/2	6	6 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K215	00000
	1/2	8	8 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K216	00000
	3/4	1 1/2, 1 1/4	1.66", 1.9"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K221	00000
	3/4	2	2 3/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K222	00000
	3/4	3	3 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K223	00000
	3/4	4	4 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K224	00000
	3/4	6	6 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K225	00000


	3/4	8	8 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K226	00000
	1	1 1/2, 1 1/4	1.66", 1.9"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K231	00000
	1	2	2 3/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K232	00000
	1	3	3 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K233	00000
	1	4	4 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K234	00000
	1	6	6 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K235	00000
	1	8	8 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K236	00000
	1 1/4	2	2 3/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K241	00000
	1 1/4	3	3 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K242	00000
	1 1/4	4	4 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K243	00000


	1 1/4	6	6 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K244	000000
	1 1/4	8	8 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K245	000000
	1 1/2	2	2 3/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K251	00000
	1 1/2	3	3 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K252	00000
	1 1/2	4	4 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K253	00000
	1 1/2	6	6 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K254	000000
	1 1/2	8	8 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K255	000000
	2	3	3 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K261	00000
	2	4	4 1/2"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K262	00000
	2	6	6 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K263	000000


	2	8	8 5/8"	Epoxy-Coated Iron	Blue	100 psi @ 72° F	Buna-N	Galvanized Steel	4572K264	000000

180° Bend Connectors

Image of Product. Front orientation. Pipe Traps. Low-Pressure Iron and Steel Threaded Pipe Fittings.

180° bend connectors are also known as U-bends.

	Material	Max. Pressure @ Temp.	Max. Steam Pressure @ Temp.	Certification	Shape		Each
NPT Female



	1/2	Iron	150 psi @ 72° F	150 psi @ 350° F	UL Listed	180° Bend	44605K563	000000


	3/4	Iron	150 psi @ 72° F	150 psi @ 350° F	UL Listed	180° Bend	44605K564	00000
	1	Iron	150 psi @ 72° F	150 psi @ 350° F	—	180° Bend	44605K565	00000
	1 1/4	Iron	150 psi @ 72° F	150 psi @ 350° F	UL Listed	180° Bend	44605K566	00000
	1 1/2	Iron	150 psi @ 72° F	150 psi @ 350° F	UL Listed	180° Bend	44605K567	000000
	2	Iron	150 psi @ 72° F	150 psi @ 350° F	UL Listed	180° Bend	44605K568	000000

Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 80 pipe. With thicker, stronger walls than standard-wall fittings, they can handle heavy duty supply applications, such as water processing, wastewater treatment, and irrigation. Fittings are plastic for good corrosion resistance. They meet ASTM specifications and testing requirements for material quality.

To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.

Saddle Tap Tees with Gasket

Cement Socket

Female × Clamp

Saddle-tap tee adapters allow you to create additional outlets and connections in metal or plastic pipe. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole so the gasket and lip are fully engaged and secure with the included nuts, bolts, and washers.

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
Cement Socket Female × Clamp On



	1/2	2	2 3/8"	3/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K14	000000


	1/2	3	3 1/2"	7/8"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K19	00000
	1/2	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	160 psi @ 72° F	EPDM	NSF/ANSI 61	4849K42	00000
	3/4	2	2 3/8"	7/8"	80	PVC	Dark Gray	345 psi @ 72° F	EPDM	NSF/ANSI 61	4849K15	00000
	3/4	3	3 1/2"	1 1/8"	80	PVC	Dark Gray	345 psi @ 72° F	EPDM	NSF/ANSI 61	4849K26	00000
	3/4	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	345 psi @ 72° F	EPDM	NSF/ANSI 61	4849K43	00000
	1	2	2 3/8"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K13	00000
	1	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K29	00000
	1	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K44	00000
	1	6	6 5/8"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K69	000000
	1 1/2	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	235 psi @ 72° F	EPDM	NSF/ANSI 61	4849K35	00000


	1 1/2	4	4 1/2"	1 3/4"	80	PVC	Dark Gray	235 psi @ 72° F	EPDM	NSF/ANSI 61	4849K45	00000
	2	3	3 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K38	00000
	2	4	4 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K46	00000
	2	6	6 5/8"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K37	000000
	3	4	4 1/2"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K31	000000
	3	6	6 5/8"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K39	000000

Saddle Tap Tees with Collar and Gasket

Female x Clamp On

Fittings with collar have a stainless steel reinforcement on the female threads to prevent the threads from cracking.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
NPT Female × Clamp On



	1/2	2	2 3/8"	3/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K51	000000


	1/2	3	3 1/2"	7/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K56	00000
	1/2	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K63	000000
	3/4	2	2 3/8"	7/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K52	00000
	3/4	3	3 1/2"	7/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K57	00000
	3/4	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K64	000000
	1	2	2 3/8"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K53	00000
	1	3	3 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K58	00000
	1	4	4 1/2"	1 1/8"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K65	000000
	1	6	6 5/8"	1 1/8"	80	PVC	Dark Gray	315 psi @ 72° F	EPDM	NSF/ANSI 61	4849K74	000000
	1 1/2	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K61	00000


	1 1/2	4	4 1/2"	1 3/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K67	000000
	2	3	3 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K62	00000
	2	4	4 1/2"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K68	000000
	2	6	6 5/8"	2 1/4"	80	PVC	Dark Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4849K82	000000
	3	4	4 1/2"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K71	000000
	3	6	6 5/8"	3"	80	PVC	Dark Gray	185 psi @ 72° F	EPDM	NSF/ANSI 61	4849K83	000000

CPVC Pipe Fittings for Chemicals

Made of CPVC, these fittings withstand salt solutions, acids, and other harsh substances. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and wastewater treatment. These fittings are comparable to Corzan. Some meet ASTM D1784 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Saddle Tap Tees with Gasket

NPT Female ×

Clamp On

Saddle-tap tees allow you to create additional outlets and connections in metal or plastic pipe. They clamp on for an easy way to install and maintain systems.

80 Pipe Schedule—Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
NPT Female × Clamp On



	1/2	2	2 3/8"	3/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K442	000000


	1/2	3	3 1/2"	7/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K445	00000
	1/2	4	4 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K449	000000
	3/4	2	2 3/8"	7/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K443	00000
	3/4	3	3 1/2"	7/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K446	00000
	3/4	4	4 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K451	000000
	1	2	2 3/8"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K444	00000
	1	3	3 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K447	00000
	1	4	4 1/2"	1 1/8"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K452	000000
	1 1/2	3	3 1/2"	2 1/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K448	00000
	1 1/2	4	4 1/2"	1 3/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K453	000000


	2	4	4 1/2"	2 1/4"	80	CPVC	Light Gray	230 psi @ 72° F	EPDM	NSF/ANSI 61	4589K454	000000
	2	6	6 5/8"	2 1/4"	80	CPVC	Light Gray	200 psi @ 72° F	EPDM	NSF/ANSI 61	4589K455	000000

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe–they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Note: For fittings that are not rated for pressure, you can use the pressure rating of the plastic pipe as a reference. Threaded fittings are limited to 50% of the rated pressure of the pipe.

Saddle Tap Tees with Gasket

Female × Clamp On

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a PVC primer and cement (also known as solvent weld).

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	OD	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
Cement Socket Female × Clamp On



	1/2	2	2 3/8"	3/4"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K11	000000


	1/2	3	3 1/2"	7/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K16	00000
	1/2	4	4 1/2"	1 1/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K23	00000
	3/4	2	2 3/8"	7/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K43	00000
	3/4	3	3 1/2"	7/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K17	00000
	3/4	4	4 1/2"	1 1/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K24	000000
	1	2	2 3/8"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K44	00000
	1	3	3 1/2"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K18	00000
	1	4	4 1/2"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K25	000000
	1	6	6 5/8"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K42	000000
	1 1/2	3	3 1/2"	2 1/4"	1 29/32"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K21	00000


	1 1/2	4	4 1/2"	1 3/4"	1 29/32"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K27	000000
	2	3	3 1/2"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K22	00000
	2	4	4 1/2"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K28	000000
	2	6	6 5/8"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K82	000000
	3	4	4 1/2"	3"	3 1/2"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K31	000000

Saddle Tap Tees with Collar and Gasket

Female × Clamp On

Fittings with collar have a stainless steel reinforcement on the female threads to prevent the threads from cracking.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Pipe Size (B)	For Pipe OD (B)	For Hole Dia.	OD	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
NPT Female × Clamp On



	1/2	2	2 3/8"	3/4"	27/32"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K51	000000


	1/2	3	3 1/2"	7/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K56	000000
	1/2	4	4 1/2"	1 1/8"	27/32"	40	PVC	White	300 psi @ 72° F	EPDM	NSF/ANSI 61	4763K63	000000
	3/4	2	2 3/8"	7/8"	1 3/64"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K52	00000
	3/4	3	3 1/2"	7/8"	1 1/16"	40	PVC	White	240 psi @ 72° F	EPDM	NSF/ANSI 61	4763K57	000000
	3/4	4	4 1/2"	1 1/8"	1 3/64"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K64	000000
	1	2	2 3/8"	1 1/8"	1 5/16"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K53	00000
	1	3	3 1/2"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K58	000000
	1	4	4 1/2"	1 1/8"	1 5/16"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K65	000000
	1	6	1 5/8"	1 1/8"	1 5/16"	40	PVC	White	225 psi @ 72° F	EPDM	NSF/ANSI 61	4763K45	000000
	1 1/2	3	3 1/2"	2 1/4"	1 29/32"	40	PVC	White	165 psi @ 72° F	EPDM	NSF/ANSI 61	4763K61	000000


	1 1/2	4	4 1/2"	1 3/4"	1 29/32"	40	PVC	White	165 psi @ 72° F	EPDM	NSF/ANSI 61	4763K67	000000
	2	3	3 1/2"	2 1/4"	2 3/8"	40	PVC	White	140 psi @ 72° F	EPDM	NSF/ANSI 61	4763K46	00000
	2	4	4 1/2"	2"	2 3/8"	40	PVC	White	140 psi @ 72° F	EPDM	NSF/ANSI 61	4763K68	000000
	2	6	6 5/8"	2 1/4"	2 3/8"	40	PVC	White	200 psi @ 72° F	EPDM	NSF/ANSI 61	4763K85	000000
	3	4	4 1/2"	3"	3 1/2"	40	PVC	White	130 psi @ 72° F	EPDM	NSF/ANSI 61	4763K71	000000

Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water

To make installing and maintaining systems easy, these connectors come with clamps that form a strong seal on pipe and fittings once tightened.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Saddle Tap Tees

Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Saddle Tap Tees, Clamp On × Clamp On.

Clamp On × Clamp On

Saddle-tap adapters allow you to tap into an existing pipeline. They have wraparound clamps that provide nearly 360° contact with pipe; as the clamps are tightened, pressure is uniformly distributed around the pipe for maximum support. To install, shut down your line and drill a hole in the pipe where you want to create a connection. Position the saddle over the hole and tighten the clamps.

	For Pipe Size
	(A)	(B)	For Hole Dia.	Material	Max. Pressure @ Temp.	Clamp Material		Each
Clamp On × Clamp On



		4	6 to 12	4 1/8"	PVC	Not Rated	300 Series Stainless Steel	48545K15	000000


		6	6 to 12	5 1/2"	PVC	Not Rated	300 Series Stainless Steel	48545K17	000000

Saddle Tap Wyes

Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Drain, Waste, and Vent PVC Clamp-On Pipe Fittings for Water, Saddle Tap Wyes, Clamp On × Clamp On.

Clamp On × Clamp On

	For Pipe Size
	(A)	(B)	For Hole Dia.	Material	Max. Pressure @ Temp.	Clamp Material		Each
Clamp On × Clamp On



		4	6 to 12	4 1/8"	PVC	Not Rated	300 Series Stainless Steel	48545K19	0000000


		6	6 to 12	5 1/2"	PVC	Not Rated	300 Series Stainless Steel	48545K21	000000

Low-Pressure Aluminum Quick-Connect Pipe Fittings

Twist these fittings onto aluminum pipe for quick, sealed connections—no threading, soldering, or welding necessary. Use them to build a compressed air system in half the time it would take to build a copper or steel system. Also known as Unipipe fittings, they’re part of a quick-connect system that’s compatible with pipe from Unipipe, Transair, and Infinity.

Finger tighten the collar on the end of these fittings, then use a wrench for the final quarter turn. The inside of these fittings has a compression ring and O-ring to seal against the pipe. They’re easy to take apart as needed to modify your setup.

Saddle Tap Tees


Hole Saw	Tee	Tee

Saddle tap tees bolt onto pipe to add connections without requiring you to disassemble your system. You can use them to connect your ceiling-mounted pipe to equipment below. To install, drill through the threaded outlet into your pipe with a hole saw (sold separately).

	Taps							Hole Saws
		For Pipe OD
	Pipe Size (A)	(A)	(B)	Material	Max. Pressure @ Temp.		Each		Each
NPT Female × Quick Disconnect



		1/2	—	1" (25 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N64	000000	5314N78	000000


		1/2	—	1" (25 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N71	00000	5314N78	00000
		1/2	—	1 1/2" (40 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N65	00000	5314N78	00000
		1/2	—	1 1/2" (40 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N72	00000	5314N79	00000
		3/4	—	1 1/2" (40 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N66	00000	5314N79	00000
		3/4	—	1 1/2" (40 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N73	00000	5314N79	00000


		Quick-Connect Female × Quick Disconnect



				—	3/4" (20 mm)	1" (25 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N67	00000	5314N78	00000


				—	3/4" (20 mm)	1 1/2" (40 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N68	00000	5314N79	00000
				—	1" (25 mm)	1 1/2" (40 mm)	Epoxy-Coated 6061 Aluminum	580 psi @ 72° F	5314N69	00000	5314N79	00000

Wrenches

For Pipe OD	Drive Size, mm	Overall Lg., mm	Head Thk., mm	Material		Each
3/4"	20	172	5	Galvanized Steel	5314N81	000000
1"	25	192	5	Galvanized Steel	5314N82	00000
1 1/2"	40	245	5	Galvanized Steel	5314N83	00000

Measuring Tools

Image of Product. Front orientation. Depth Gauges.

Use measuring tools to mark your pipe’s proper insertion depth so you know if it’s inserted far enough into the fitting.

Max. Dp. Measured, mm	Lg., mm	Wd., mm	Material		Each
160	224	39	Plastic	5314N77	000000

Chemical-Resistant Duct and Fittings

Chemicals can eat away at most metal duct, but not this PVC system. It’s often used to exhaust corrosive gases, vapors, and fumes. Components press-fit together and secure with PVC pipe cement.

45° Wye Saddles

A more gradual change of direction than tees, wye saddles add onto existing ductwork without disassembling it. Cut a hole in your duct and then install the saddle over the opening.

Duct Size				PVC
(A)	(B)	ID	Color		Each



	6	8	6 5/8"	Gray	2051K742	0000000


	8	10	8 5/8"	Gray	2051K743	000000
	10	12	10 3/4"	Gray	2051K744	000000
	12	14	12 3/4"	Gray	2051K745	000000

Quick-Disconnect Duct and Fittings

The fastest ductwork to disassemble for dust collection and other frequently cleaned systems. Join sections with quick-release clamps that open and close with a flip of the latch. Since you don’t need screws, welds, or tools, the installation time is half that of other duct types.

Tee Saddles

Add a branch to split or merge airflow without disassembling existing ductwork. Cut a hole in your duct and then secure the saddle over the opening.

Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.

Corrosion-Resistant 304 Stainless Steel—The most corrosion-resistant metal duct we sell. It won’t rust or degrade in systems that exhaust chemical fumes or vent heat from industrial ovens and dryers.

Duct Size				Galvanized Steel		Corrosion-Resistant 304 Stainless Steel
(A)	(B)	ID	Ga.		Each		Each



	6	6	5 7/8"	22	1761K522	000000	2538K231	0000000


	6	8	5 7/8"	22	1761K532	000000	2538K232	000000
	6	10	5 7/8"	22	1761K542	000000	2538K233	000000
	6	12	5 7/8"	22	1761K235	000000	2538K234	000000

30° Wye Saddles

A more gradual change of direction than tees, wye saddles add onto existing ductwork without disassembling it. Cut a hole in your duct and then install the saddle over the opening.

Galvanized Steel—Corrosion resistant and affordable, galvanized steel is the most commonly used ductwork material.

Duct Size				Galvanized Steel		Corrosion-Resistant 304 Stainless Steel
(A)	(B)	ID	Ga.		Each		Each



	3	4	3 1/16"	22	1761K401	000000	———	0


	4	5	3 7/8"	22	1761K402	00000	———	0
	5	6	4 7/8"	22	1761K403	00000	———	0
	6	6	5 7/8"	22	1761K56	00000	2538K221	0000000
	6	7	5 7/8"	22	1761K404	00000	———	0
	6	8	5 7/8"	22	1761K57	000000	2538K222	000000
	6	10	5 7/8"	22	1761K58	000000	2538K223	000000
	6	12	5 7/8"	22	1761K225	000000	2538K224	000000
	7	8	6 7/8"	22	1761K405	00000	———	0
	8	9	7 7/8"	22	1761K406	00000	———	0
	9	10	8 7/8"	22	1761K407	000000	———	0


	10	12	9 7/8"	22	1761K408	000000	———	0
	12	14	12"	20	1761K409	000000	———	0
	14	16	13 15/16"	20	1761K411	000000	———	0
	16	18	16"	20	1761K412	000000	———	0
	18	20	17 15/16"	20	1761K413	000000	———	0
	20	22	19 15/16"	20	1761K414	000000	———	0
	22	24	22"	20	1761K415	000000	———	0