Panel-Mount Electrically Actuated Hour Meters
Display running time on a machine so you can schedule preventative maintenance.
Non-resettable meters prevent tampering and accidental loss of data.
Meters with indicator icons can be programmed to show visual alerts for the kind of maintenance task you need to perform. They include seven different icons.
Mount meters with a gasket to help them meet NEMA 4X, 12, and IP66 ratings for protection against dust and splashing with water, oil, and coolant.
Hour Meters | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Panel Cutout | Overall | Gaskets | |||||||||||||
| Resettable | Counting Direction | No. of Digits | Wd. | Ht. | Ht. | Wd. | Dp. | Dia. | Operating Voltage | Features | Each | Each | |||
Screw On | |||||||||||||||
Screw Terminals | |||||||||||||||
| E | Yes | Up | 8 | 1.8" | 0.9" | 1" | 1.9" | 2.1" | __ | 10-240V AC, 5-110V DC | Battery-Powered Display | 00000000 | 000000 | 000000 | 00 |
Spade Terminals | |||||||||||||||
| J | No | Up | 8 | 1.4" | 0.9" | __ | __ | 1.1" | 2.9" | 20-270V AC, 10-300V DC | Battery-Powered Display | 0000000 | 00000 | 0000000 | 00000 |
Clip | |||||||||||||||
Screw Terminals | |||||||||||||||
| P | Yes | Up | 8 | 1.7" | 0.8" | 1.1" | 2" | 1.5" | __ | 20-270V AC, 10-300V DC | Battery-Powered Display, Indicator Icons | 0000000 | 00000 | 0000000 | 000 |
Spade Terminals | |||||||||||||||
| R | No | Up | 8 | 1.4" | 0.9" | 1.1" | 1.6" | 0.8" | __ | 20-270V AC, 10-300V DC | Battery-Powered Display | 0000000 | 00000 | 0000000 | 0000 |
| R | Yes | Up | 8 | 1.4" | 0.9" | 1.1" | 1.6" | 0.8" | __ | 20-270V AC, 10-300V DC | Battery-Powered Display | 0000000 | 00000 | 0000000 | 0000 |
Switch-Contact-Actuated Hour Meters
No need for a separate power source—these hour meters are powered by internal batteries that last more than 10 years. Often used where power sources aren’t easily accessible, they work well in remote monitoring systems, industrial equipment, and machinery. Wire the hour meter to a relay or switch on your machine so it can receive signals when the machine is running. The total number of hours is shown on the display. Press a button on the meter to reset the time to zero or connect it to a switch or button to reset it from a distance. These meters are UL recognized, C-UL recognized, and CE marked, so they meet American, Canadian, and European safety standards.
Screw on hour meters are IP65, NEMA 4X, and NEMA 12 rated, so they’re protected from dust, water, and splashing oil and coolant.
Clip on hour meters can be programmed to flash an icon of your choosing after your machine has run for a set number of hours. Similar to the lights on your car’s dashboard, the icons signal maintenance for your oil, oil filter, service, and more. Mount them with a gasket (sold separately) to protect against dust, water, and splashing oil and coolant and so they’ll meet NEMA 4/4X, NEMA 12, and IP66 ratings.
Meters | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Panel Cutout | Overall | Gaskets | ||||||||||||
| Resettable | Counting Direction | No. of Digits | Ht. | Wd. | Ht. | Wd. | Dp. | Features | Environmental Rating | Specifications Met | Each | Each | ||
Screw On | ||||||||||||||
Screw Terminals | ||||||||||||||
| Yes | Up and Down | 8 | 0.9" | 1.8" | 1" | 1.9" | 2.1" | Battery-Powered Display, Manual Reset Button, Remote Reset | IP65, NEMA 4X, NEMA 12 | UL Recognized Component, C-UL Recognized Component, CE Marked | 00000000 | 000000 | 000000 | 00 |
Clip On | ||||||||||||||
Screw Terminals | ||||||||||||||
| Yes | Up | 8 | 0.8" | 1.7" | 1.1" | 2" | 1 1/2" | Battery-Powered Display, Indicator Icons, Manual Reset Button, Remote Reset | IP66 | UL Recognized Component, C-UL Recognized Component, CE Marked | 0000000 | 00000 | 0000000 | 00000 |