Pumps for Hydraulic Jacks
Connect these pumps to a ram to create a hydraulic jack. Use hose to connect; add a pressure gauge to monitor hydraulic oil pressure levels and guard against overload.
To use Style 1 and 2 pumps vertically, point the pump head (where the handle meets the pump) downward. Style 2 pumps are made of aluminum, making them lighter and more corrosion resistant than steel and iron pumps.
Style 3 pumps are also known as trailer pumps and have a body that is taller than it is long to fit in a narrow space. Use as part of a permanent lifting system.
Style 4, 5, and 6 pumps use air power to operate where electricity is not available and require minimal effort. Use the pedal with your hand or foot to activate and release your ram.
Style 7 and 8 pumps operate from up to 10 ft. away using the included wired remote.
Pumps with two-speeds are quick to pump until the load is engaged, then pump more slowly for precise positioning.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Pump | Mounting | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Working Orientation | Oil Capacity, cu. in. | No. of Speeds | Lg. | Wd. | Ht. | Max. Pressure, psi | Pipe Size  | Thread Type | Gender | Material | Fasteners Included | No. of Holes | Hole Dia. | Plug Type | Includes | Each | |
Manual | ||||||||||||||||||
| 1 | Horizontal, Vertical | 20 | 2 | 14 1/4" | 5" | 5 1/8" | 10,000 | 3/8 | NPTF | Female | Steel | No | 2 | 1/4" | __ | __ | 0000000 | 0000000 |
| 1 | Horizontal, Vertical | 45 | 1 | 24 7/8" | 5 3/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Steel | __ | __ | __ | __ | __ | 0000000 | 000000 |
| 1 | Horizontal, Vertical | 45 | 2 | 25 5/8" | 5 3/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Steel | __ | __ | __ | __ | __ | 0000000 | 000000 |
| 1 | Horizontal, Vertical | 145 | 2 | 23" | 5 1/2" | 6 5/8" | 10,000 | 3/8 | NPTF | Female | Steel | No | 4 | 7/16" | __ | __ | 0000000 | 000000 |
| 2 | Horizontal, Vertical | 55 | 2 | 21" | 4 3/4" | 7" | 10,000 | 3/8 | NPTF | Female | Aluminum | __ | __ | __ | __ | __ | 000000 | 000000 |
| 2 | Horizontal, Vertical | 155 | 2 | 21 3/4" | 7 1/8" | 9" | 10,000 | 3/8 | NPTF | Female | Aluminum | No | 2 | 3/8" | __ | __ | 000000 | 00000000 |
| 3 | Vertical | 148 | 1 | 8" | 8" | 11 1/8" | 3,000 | 3/8 | NPTF | Female | Cast Iron | No | 4 | 9/16" | __ | __ | 00000000 | 00000000 |
| 3 | Vertical | 148 | 1 | 8" | 8" | 11 1/8" | 6,500 | 3/8 | NPTF | Female | Cast Iron | No | 4 | 9/16" | __ | __ | 00000000 | 00000000 |
| 3 | Vertical | 148 | 1 | 8" | 8" | 11 1/8" | 12,000 | 3/8 | NPTF | Female | Cast Iron | No | 4 | 9/16" | __ | __ | 00000000 | 00000000 |
Air | ||||||||||||||||||
| 4 | Horizontal | 36 | 1 | 14 3/4" | 5 5/8" | 5 3/4" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 5/16" | __ | __ | 00000000 | 00000000 |
| 5 | Horizontal | 90 | 1 | 10 5/8" | 5 3/4" | 8 1/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/8" | __ | __ | 00000000 | 000000 |
| 6 | Horizontal | 127 | 1 | 13 5/8" | 6 1/2" | 8 3/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/16" | __ | __ | 00000000 | 00000000 |
Electric | ||||||||||||||||||
| 7 | Vertical | 116 | 2 | 9 5/8" | 9 5/8" | 14 1/4" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 3/8" | Three Prong | Remote Control with 10-ft. Cord | 00000000 | 00000000 |
| 8 | Vertical | 590 | 2 | 11 1/2" | 9 1/2" | 19 5/8" | 10,000 | 3/8 | NPTF | Female | Aluminum, Steel | No | 4 | 1/2" | NEMA 5-20 | Remote Control with 10-ft. Cord | 0000000 | 00000000 |
Hydraulic Jacks
Lift in tight spaces where a bottle jack won't fit. Jacks include a ram, a hand pump with hydraulic oil, a pressure gauge, and a hydraulic hose. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Jacks with ram center hole have an unthreaded hole for attaching a threaded rod so you can use them in pulling applications.
Rams with collar threads are threaded at the top for mounting in a fixture or with a mounting plate (sold separately; see Mounting Plates for Hydraulic Jacks).
Warning: Never use to support people or loads over people.
Capacity | Ram | Pump | Mounting | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Max. Pressure, psi | OD | Center Hole Dia. | Collar Thread Size | Oil Capacity, cu. in. | Lg. | Wd. | Ht. | Oil Capacity, cu. in. | Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 5 | 10,000 | 1 5/8"-2 1/4" | 5/8" | 10,000 | 2 5/8" | __ | __ | 0.6 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 000000000 |
| 5 | 10,000 | 4 3/8"-5 1/2" | 1 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 1 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 6 5/8"-9 3/4" | 3 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 3 | 14 1/4" | 5" | 5 1/8" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 8 1/2"-13 1/2" | 5" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 5 | 13 1/4" | 3 3/4" | 5 5/8" | 20 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 8 1/2"-13 5/8" | 5 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 5 | 14 1/4" | 5 1/8" | 5" | 20 | Steel | No | 2 | 1/4" | 0000000 | 00000000 |
| 5 | 10,000 | 10 3/4"-17 7/8" | 7 1/8" | 10,000 | 1 1/2" | __ | 1 1/2"-16 | 12.6 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 4 3/4"-6 7/8" | 2 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 4.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | No | 2 | 1/4" | 0000000 | 00000000 |
| 10 | 20,000 | 4 7/8"-7" | 2 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 4.2 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 9 3/4"-15 3/4" | 6" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 13.7 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 10 | 20,000 | 9 3/4"-15 7/8" | 6 1/8" | 10,000 | 2 1/4" | __ | 2 1/4"-14 | 13.7 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 12 | 24,000 | 7 1/4"-10 1/4" | 3" | 10,000 | 2 3/4" | 3/4" | 2 3/4"-16 | 8.3 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 25 | 50,000 | 10 3/4"-16 7/8" | 6 1/8" | 10,000 | 3 1/2" | __ | 3 5/16"-12 | 32.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
| 25 | 50,000 | 10 3/4"-17" | 6 1/4" | 10,000 | 3 3/8" | __ | 3 5/16"-12 | 32.2 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | __ | 15.8 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 4 5/8"-7" | 2 3/8" | 10,000 | 4" | __ | __ | 15.8 | 25 5/8" | 5 3/4" | 5 3/8" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 30 | 60,000 | 7 1/8"-9 5/8" | 2 1/2" | 10,000 | 4 1/2" | 1 1/4" | 4 1/2"-12 | 18 | 25 5/8" | 5 3/8" | 5 3/4" | 45 | Steel | __ | __ | __ | 0000000 | 00000000 |
| 50 | 100,000 | 4 7/8"-7 1/4" | 2 3/8" | 10,000 | 4 7/8" | __ | __ | 22.9 | 21" | 4 3/4" | 7" | 55 | Aluminum | __ | __ | __ | 0000000 | 00000000 |
| 55 | 110,000 | 11 1/8"-17 1/4" | 6 1/8" | 10,000 | 5" | __ | 5"-12 | 69 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
| 100 | 200,000 | 5 5/8"-7 5/8" | 2" | 10,000 | 6 1/2" | __ | __ | 44.2 | 20 3/4" | 5 3/4" | 6 7/8" | 134 | Steel | No | 2 | 5/16" | 0000000 | 00000000 |
Hydraulic Jacks with Extenders and Pryers
Lift in tight spaces where a bottle jack won't fit. These jacks include extensions for increasing lift height and accessories for prying. For vertical use, the pump head (where the handle meets the pump) must be pointed down.
Note: When ram extenders or accessories are used, the rated capacity is reduced by 50% for each extender and accessory connected.
Warning: Never use to support people or loads over people.
Pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Max. Lift | Max. Pressure, psi | Ram OD | Lg. | Wd. | Ht. | Includes | Each | |
4 tons / 8,000 lbs. Capacity | |||||||||
| 10 3/4"-15 5/8" | 4 7/8" | 8,000 | 1 1/2" | 12 7/8" | 5 3/4" | 5 1/8" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Five Ram Extenders (3", 6 1/8", 8 1/2", 16 1/2", and 19 1/2" lengths) Hose Male Connector Stabilizing Base Plastic Case | 000000 | 0000000 |
| 10 1/8"-14 7/8" | 4 3/4" | 7,000 | 2" | 14 3/4" | 4 1/2" | 5" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Pulling Accessories (Two Chains with Hooks, Chain Pull Plate, and Clamp Head) Six Ram Extenders (3", 6", and 18", and three 15" lengths) Three Ram Extender Connectors Four Locking Pins Hose Male Connector Male and Female Adapters Stabilizing Base Metal Case | 0000000 | 00000000 |
10 tons / 20,000 lbs. Capacity | |||||||||
| 13 3/4"-19 3/4" | 6" | 10,000 | 2 1/8" | 20 3/8" | 5 3/4" | 5 1/8" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Hose Male Connector Stabilizing Base Plastic Case Four Ram Extenders (4", 10", 18", and 27" lengths) | 000000 | 000000 |
| 12 3/8"-18 1/4" | 5 7/8" | 10,000 | 2 1/2" | 20" | 5 7/8" | 5 1/2" | Pushing Accessories (Rubber Head, Multi-Point Head, and Serrated Saddle) Prying Accessories (Hydraulic Wedge, Plunger Toe, Ram Toe, and Wedge Head) Pulling Accessories (Two Chains with Hooks, Chain Pull Plate, and Clamp Head) Four Ram Extenders (6", 12", 15", and 18" lengths) Two Ram Extender Connectors Four Locking Pins Hose Male Connector Male and Female Adapters Stabilizing Base Metal Case | 0000000 | 00000000 |
Hydraulic Pumps
Also known as gear pumps, these have few moving parts so they're less prone to wear than other hydraulic pumps. Combine with an electric motor to generate flow in a hydraulic system. To mount to a NEMA C-face motor, use a Pump-to-Motor Mount (sold separately).
UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.
For technical drawings and 3-D models, click on a part number.
Inlet Connection— UN/UNF (SAE Straight) | Outlet Connection— UN/UNF (SAE Straight) | Overall | Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fixed Displacement Rate, cu. in./rev. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Speed, rpm | Thread Size | Dash Size | Thread Size | Dash Size | Ht. | Lg. | Dia. | Lg. | Choose a Drive Direction | Each | |
| 0.11 | 1.7 | 2,500 | 4,000 | 7/8"-14 | 10 | 3/4"-16 | 08 | 3 5/8" | 4" | 1/2" | 1 1/4" | 0000000 | 0000000 | |
| 0.21 | 3.3 | 2,500 | 4,000 | 7/8"-14 | 10 | 3/4"-16 | 08 | 3 5/8" | 4 1/4" | 1/2" | 1 1/4" | 0000000 | 000000 | |
| 0.33 | 5.2 | 2,500 | 4,000 | 7/8"-14 | 10 | 3/4"-16 | 08 | 3 5/8" | 4 3/8" | 1/2" | 1 1/4" | 0000000 | 000000 | |
| 0.52 | 8.4 | 2,500 | 4,000 | 7/8"-14 | 10 | 3/4"-16 | 08 | 3 5/8" | 4 3/4" | 1/2" | 1 1/4" | 0000000 | 000000 | |
| 0.64 | 7.8 | 2,000 | 3,000 | 7/8"-14 | 10 | 3/4"-16 | 08 | 3 5/8" | 4 7/8" | 1/2" | 1 1/4" | 0000000 | 000000 | |
Inlet Connection— UN/UNF (SAE Straight) | Outlet Connection— UN/UNF (SAE Straight) | Overall | Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fixed Displacement Rate, cu. in./rev. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Speed, rpm | Thread Size | Dash Size | Thread Size | Dash Size | Ht. | Lg. | Dia. | Lg. | Choose a Drive Direction | Each | |
| 0.37 | 5.9 | 4,000 | 4,000 | 7/8"-14 | 10 | 3/4"-16 | 08 | 4 5/8" | 4 7/8" | 3/4" | 1" | 0000000 | 0000000 | |
| 0.49 | 7.9 | 4,000 | 4,000 | 1 1/16"-12 | 12 | 7/8"-14 | 10 | 4 5/8" | 5" | 3/4" | 1" | 0000000 | 000000 | |
| 0.61 | 9.9 | 4,000 | 4,000 | 1 1/16"-12 | 12 | 7/8"-14 | 10 | 4 5/8" | 5 1/8" | 3/4" | 1" | 0000000 | 000000 | |
| 0.98 | 11.9 | 4,000 | 3,000 | 1 1/16"-12 | 12 | 7/8"-14 | 10 | 4 5/8" | 5 1/2" | 3/4" | 1" | 0000000 | 000000 | |
| 1.16 | 14.1 | 4,000 | 3,000 | 1 5/16"-12 | 16 | 1 1/16"-12 | 12 | 4 5/8" | 5 5/8" | 3/4" | 1" | 0000000 | 000000 | |
| 1.4 | 15.9 | 3,200 | 2,800 | 1 5/16"-12 | 16 | 1 1/16"-12 | 12 | 4 5/8" | 5 7/8" | 3/4" | 1" | 0000000 | 000000 | |
| 1.65 | 16.1 | 2,700 | 2,400 | 1 5/16"-12 | 16 | 1 1/16"-12 | 12 | 4 5/8" | 6 1/8" | 3/4" | 1" | 0000000 | 000000 | |
Inlet Connection— UN/UNF (SAE Straight) | Outlet Connection— UN/UNF (SAE Straight) | Overall | Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fixed Displacement Rate, cu. in./rev. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Speed, rpm | Thread Size | Dash Size | Thread Size | Dash Size | Ht. | Lg. | Dia. | Lg. | Choose a Drive Direction | Each | |
| 2.01 | 24.5 | 4,000 | 3,000 | 1 5/8"-12 | 20 | 1 5/16"-12 | 16 | 5 7/8" | 7 1/8" | 7/8" | 1 1/4" | 0000000 | 0000000 | |
| 2.32 | 28.3 | 4,000 | 3,000 | 1 5/8"-12 | 20 | 1 5/16"-12 | 16 | 5 7/8" | 7 3/8" | 7/8" | 1 1/4" | Clockwise | 0000000 | 000000 |
| 3.05 | 33.5 | 2,900 | 2,700 | 1 5/8"-12 | 20 | 1 5/16"-12 | 16 | 5 7/8" | 7 3/4" | 7/8" | 1 1/4" | 0000000 | 000000 | |
Inlet Connection— UN/UNF (SAE Straight) | Outlet Connection— UN/UNF (SAE Straight) | Overall | Shaft | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Fixed Displacement Rate, cu. in./rev. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Speed, rpm | Thread Size | Dash Size | Thread Size | Dash Size | Ht. | Lg. | Dia. | Lg. | Drive Direction | Each | |
| 0.07 | 0.8 | 3,000 | 4,000 | 9/16"-18 | 06 | 9/16"-18 | 06 | 3 7/16" | 4 5/8" | 1/2" | 1 3/8" | Clockwise and Counterclockwise | 0000000 | 0000000 |
| 0.13 | 1.7 | 3,000 | 4,000 | 3/4"-16 | 08 | 3/4"-16 | 08 | 3 7/16" | 4 5/8" | 1/2" | 1 3/8" | Clockwise and Counterclockwise | 0000000 | 000000 |
| 0.39 | 5 | 3,000 | 4,000 | 7/8"-14 | 10 | 7/8"-14 | 10 | 3 7/16" | 5 1/8" | 1/2" | 1 3/8" | Clockwise and Counterclockwise | 0000000 | 000000 |
| 0.71 | 5.4 | 1,800 | 2,400 | 7/8"-14 | 10 | 7/8"-14 | 10 | 3 7/16" | 5 5/8" | 1/2" | 1 3/8" | Clockwise and Counterclockwise | 0000000 | 000000 |
Smooth-Operating Hydraulic Pumps
For technical drawings and 3-D models, click on a part number.
Inlet Connection— NPT | Outlet Connection— NPT | Overall | Shaft | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SAE Trade Size | Fixed Displacement Rate, cu. in./rev. | Max. Flow Rate, gpm | Max. Pressure, psi | Max. Speed, rpm | Pipe Size | Dash Size | Pipe Size | Dash Size | Ht. | Lg. | Dia. | Lg. | Mounting Hole Ctr-to-Ctr | Drive Direction | Each | |
Opposite Side Ports | ||||||||||||||||
| A | 0.6 | 4.6 | 1,500 | 1,800 | 1 | 16 | 1/2 | 08 | 4 13/16" | 6 5/16" | 3/4" | 1 7/16" | 4 3/16" | Clockwise | 0000000 | 000000000 |
| A | 1.19 | 9.2 | 1,500 | 1,800 | 1 | 16 | 1/2 | 08 | 4 13/16" | 6 3/4" | 3/4" | 1 7/16" | 4 3/16" | Clockwise | 0000000 | 00000000 |