Filter by
System of Measurement
Stroke Length
Maximum Push Force
Retracted Length
Actuation Type
Extended Length
Rod Thread Size
Maximum Pull Force
Maximum Pressure
Overall Width
Sensor Ready
Body Material
Mounting Hole Center-to-Center
For Use With
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Return Actuation
Compact Hydraulic Cylinders
With a small body size, these cylinders fit into tight spaces but offer similar push forces to standard hydraulic cylinders. They’re double-acting cylinders, so they have two hydraulic ports—one to extend the piston rod and another to retract it. No matter the direction they’re moving, they can operate at nearly full force. This allows them to both push and pull multi-ton loads. All have a magnetic piston and can be used with sensors (sold separately) that electronically indicate piston position. Mount sensors to the cylinder with mounting brackets (sold separately).
For technical drawings and 3-D models, click on a part number.
Cylinders
Cylinder
O'all | Mounting Holes | Inlet/Outlet Connection— NPT | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Max. Push Force, lbs. | Max. Pull Force, lbs. | Retracted Lg. | Extended Lg. | Rod Thread Size  | Wd. | Ht. | Ctr.-to-Ctr. | Dia. | Pipe Size | Dash Size | Body Material | Max. Pressure, psi | Air Cushion Type | Each | |
1" Bore Dia. | ||||||||||||||||
| 1" | 1,760 | 1,200 | 3 7/8" | 4 7/8" | 3/8"-24 | 2" | 2" | 1 7/16" | 7/32" | 1/8 | 02 | Aluminum | 2,300 | No Cushion | 000000 | 0000000 |
| 2" | 1,760 | 1,200 | 4 7/8" | 6 7/8" | 3/8"-24 | 2" | 2" | 1 7/16" | 7/32" | 1/8 | 02 | Aluminum | 2,300 | No Cushion | 000000 | 000000 |
| 3" | 1,760 | 1,200 | 5 13/16" | 8 7/8" | 3/8"-24 | 2" | 2" | 1 7/16" | 7/32" | 1/8 | 02 | Aluminum | 2,300 | No Cushion | 000000 | 000000 |
1 1/2" Bore Dia. | ||||||||||||||||
| 1" | 4,510 | 3,100 | 5 1/8" | 6 1/8" | 7/16"-20 | 2 3/4" | 2 3/4" | 2 1/16" | 11/32" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 2" | 4,510 | 3,100 | 6 1/8" | 8 1/8" | 7/16"-20 | 2 3/4" | 2 3/4" | 2 1/16" | 11/32" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 3" | 4,510 | 3,100 | 7 1/8" | 10 1/8" | 7/16"-20 | 2 3/4" | 2 3/4" | 2 1/16" | 11/32" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 4" | 4,510 | 3,100 | 8" | 12" | 7/16"-20 | 2 3/4" | 2 3/4" | 2 1/16" | 11/32" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
2" Bore Dia. | ||||||||||||||||
| 1" | 7,060 | 4,840 | 5 1/2" | 6 1/2" | 3/4"-16 | 3 1/4" | 3 1/4" | 2 1/4" | 7/16" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 2" | 7,060 | 4,840 | 6 1/2" | 8 1/2" | 3/4"-16 | 3 1/4" | 3 1/4" | 2 1/4" | 7/16" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 3" | 7,060 | 4,840 | 7 1/2" | 10 1/2" | 3/4"-16 | 3 1/4" | 3 1/4" | 2 1/4" | 7/16" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 4" | 7,060 | 4,840 | 8 1/2" | 12 1/2" | 3/4"-16 | 3 3/16" | 3 3/16" | 2 9/32" | 7/16" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
2 1/2" Bore Dia. | ||||||||||||||||
| 1" | 11,210 | 7,650 | 6 1/8" | 7" | 1"-14 | 4" | 4" | 2 11/16" | 1/2" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
| 2" | 11,210 | 7,650 | 7 1/16" | 9" | 1"-14 | 4" | 4" | 2 11/16" | 1/2" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
| 3" | 11,210 | 7,650 | 8 1/16" | 11" | 1"-14 | 4" | 4" | 2 11/16" | 1/2" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
| 4" | 11,210 | 7,650 | 9 1/16" | 13" | 1"-14 | 4" | 4" | 2 11/16" | 1/2" | 1/4 | 04 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
3" Bore Dia. | ||||||||||||||||
| 3" | 18,070 | 12,350 | 8 15/16" | 11 7/8" | 1 1/4"-12 | 4 3/4" | 4 3/4" | 3 3/8" | 19/32" | 3/8 | 06 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
| 4" | 18,070 | 12,350 | 9 15/16" | 13 7/8" | 1 1/4"-12 | 4 3/4" | 4 3/4" | 3 3/8" | 19/32" | 3/8 | 06 | Aluminum | 2,300 | No Cushion | 00000000 | 000000 |
4" Bore Dia. | ||||||||||||||||
| 1" | 28,240 | 19,380 | 8 1/8" | 9 1/8" | 1 1/2"-12 | 5 3/4" | 5 3/4" | 4 3/16" | 21/32" | 3/8 | 06 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 2" | 28,240 | 19,380 | 9 1/8" | 11" | 1 1/2"-12 | 5 3/4" | 5 3/4" | 4 3/16" | 21/32" | 3/8 | 06 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
| 3" | 28,240 | 19,380 | 10 1/8" | 13" | 1 1/2"-12 | 5 3/4" | 5 3/4" | 4 3/16" | 21/32" | 3/8 | 06 | Aluminum | 2,300 | No Cushion | 0000000 | 000000 |
Optional Sensors
Sensor
| AC Voltage | DC Voltage | Solid State Output | With Switch Component | Each | |
Reed Switch—for 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" Bore Dia. | |||||
|---|---|---|---|---|---|
| 24V AC, 48V AC, 100V AC | 24V DC, 48V DC, 100V DC | __ | __ | 00000000 | 000000 |
| __ | 24V DC, 100V DC | __ | LED | 00000000 | 00000 |
Solid State Switch—for 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" Bore Dia. | |||||
| __ | 24V DC | NPN | LED | 00000000 | 00000 |
| __ | 24V DC | PNP | LED | 00000000 | 00000 |
Sensor-Ready Hydraulic Cylinders
These cylinders have a magnetic piston that can be used with tie rod-mount proximity switches (sold separately) to electronically indicate piston position. For easy interchangeability, their mounting footprint meets NFPA or NFPA and JIC (Joint Industrial Congress) industry standards. All have two hydraulic ports: one to extend the piston rod and another to retract it. Cylinders with an adjustable cushion reduce shock to internal components and lessen machine noise. Those with no cushion have a compact size.
For technical drawings and 3-D models, click on a part number.
O'all | Mounting Hole | Inlet/Outlet Connection— NPT | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Max. Push Force, lbs. | Max. Pull Force, lbs. | Retracted Lg. | Extended Lg. | Rod Thread Size | Wd. | Ht. | Ctr.-to-Ctr. | Thread Size | Pipe Size | Dash Size | Body Material | Max. Pressure, psi | Air Cushion Type | Each | |
NFPA and JIC Heavy Duty Mounting Pattern | ||||||||||||||||
1 1/2" Bore Dia. | ||||||||||||||||
| 3" | 4,420 | 3,650 | 9 3/8" | 12 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | No Cushion | 00000000 | 0000000 |
| 4" | 4,420 | 3,650 | 10 3/8" | 14 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 5" | 4,420 | 3,650 | 11 3/8" | 16 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 6" | 4,420 | 3,650 | 12 3/8" | 18 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 7" | 4,420 | 3,650 | 13 3/8" | 20 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 8" | 4,420 | 3,650 | 14 3/8" | 22 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 9" | 4,420 | 3,650 | 15 3/8" | 24 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 10" | 4,420 | 3,650 | 16 3/8" | 26 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 11" | 4,420 | 3,650 | 17 3/8" | 28 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 12" | 4,420 | 3,650 | 18 3/8" | 30 3/8" | 7/16"-20 | 2 1/2" | 2 1/2" | 1 5/8" | 3/8"-24 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
2" Bore Dia. | ||||||||||||||||
| 3" | 7,850 | 5,900 | 10 1/8" | 13 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | No Cushion | 00000000 | 00000000 |
| 4" | 7,850 | 5,900 | 11 1/8" | 15 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 5" | 7,850 | 5,900 | 12 1/8" | 17 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 6" | 7,850 | 5,900 | 13 1/8" | 19 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 7" | 7,850 | 5,900 | 14 1/8" | 21 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 8" | 7,850 | 5,900 | 15 1/8" | 23 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 9" | 7,850 | 5,900 | 16 1/8" | 25 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 10" | 7,850 | 5,900 | 17 1/8" | 27 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 11" | 7,850 | 5,900 | 18 1/8" | 29 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 12" | 7,850 | 5,900 | 19 1/8" | 31 1/8" | 3/4"-16 | 3" | 3" | 2 1/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
2 1/2" Bore Dia. | ||||||||||||||||
| 3" | 12,270 | 10,300 | 10 1/4" | 13 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | No Cushion | 00000000 | 00000000 |
| 4" | 12,270 | 10,300 | 11 1/4" | 15 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 5" | 12,270 | 10,300 | 12 1/4" | 17 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 6" | 12,270 | 10,300 | 13 1/4" | 19 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 7" | 12,270 | 10,300 | 14 1/4" | 21 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 8" | 12,270 | 10,300 | 15 1/4" | 23 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 9" | 12,270 | 10,300 | 16 1/4" | 25 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 10" | 12,270 | 10,300 | 17 1/4" | 27 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 11" | 12,270 | 10,300 | 18 1/4" | 29 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 12" | 12,270 | 10,300 | 19 1/4" | 31 1/4" | 3/4"-16 | 3 1/2" | 3 1/2" | 2 9/16" | 1/2"-20 | 1/2 | 08 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
3 1/4" Bore Dia. | ||||||||||||||||
| 3" | 20,750 | 17,020 | 11 3/4" | 14 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | No Cushion | 00000000 | 00000000 |
| 4" | 20,750 | 17,020 | 12 3/4" | 16 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 5" | 20,750 | 17,020 | 13 3/4" | 18 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 6" | 20,750 | 17,020 | 14 3/4" | 20 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 7" | 20,750 | 17,020 | 15 3/4" | 22 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 8" | 20,750 | 17,020 | 16 3/4" | 24 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 9" | 20,750 | 17,020 | 17 3/4" | 26 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 10" | 20,750 | 17,020 | 18 3/4" | 28 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 11" | 20,750 | 17,020 | 19 3/4" | 30 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 12" | 20,750 | 17,020 | 20 3/4" | 32 3/4" | 1"-14 | 4 1/2" | 4 1/2" | 3 1/4" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
4" Bore Dia. | ||||||||||||||||
| 3" | 31,420 | 25,400 | 12 5/8" | 15 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | No Cushion | 00000000 | 00000000 |
| 4" | 31,420 | 25,400 | 13 5/8" | 17 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 5" | 31,420 | 25,400 | 14 5/8" | 19 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 6" | 31,420 | 25,400 | 15 5/8" | 21 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 7" | 31,420 | 25,400 | 16 5/8" | 23 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 8" | 31,420 | 25,400 | 17 5/8" | 25 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 9" | 31,420 | 25,400 | 18 5/8" | 27 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 10" | 31,420 | 25,400 | 19 5/8" | 29 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 11" | 31,420 | 25,400 | 20 5/8" | 31 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
| 12" | 31,420 | 25,400 | 21 5/8" | 33 5/8" | 1 1/4"-12 | 5" | 5" | 3 13/16" | 5/8"-18 | 3/4 | 12 | Steel | 2,500 | Adjustable Cushion | 00000000 | 00000000 |
Tie Rod-Mount Proximity Switches
Send an electronic signal to your system when the piston reaches a certain location. Mount one or two of these sensors on a cylinder tie rod; they must be flush against the cylinder tube. An LED indicator shows the piston location. These switches are PNP (also called "sourcing") output, so they send energy onwards. PNP output is most common in solid-state relays and PLCs used in the United States and Europe.
| For Bore Dia. | For Cylinder Body Material | Each | |
| 1 1/2"-4" | Steel | 000000 | 0000000 |
Mounts
Clevis Rod End
Front/Rear Flange
Clevis Brackets with Clevis Pin
Pivot Bracket
Clevis Pin
| For Bore Dia. | Each | |
Clevis Rod Ends | ||
|---|---|---|
| 1 1/2" | 00000000 | 000000 |
| 2", 2 1/2" | 00000000 | 00000 |
| 3 1/4" | 00000000 | 000000 |
| 4" | 00000000 | 000000 |
Pivot Brackets | ||
| 1 1/2" | 00000000 | 00000 |
| 2", 2 1/2" | 00000000 | 00000 |
| 3 1/4" | 00000000 | 000000 |
| 4" | 00000000 | 000000 |
Clevis Pins | ||
| 1 1/2" | 00000000 | 00000 |
| 2", 2 1/2" | 00000000 | 00000 |
| 3 1/4" | 00000000 | 00000 |
| 4" | 00000000 | 00000 |
Front/Rear Flanges | ||
| 1 1/2" | 000000000 | 000000 |
| 2" | 000000000 | 000000 |
| 2 1/2" | 000000000 | 000000 |
| 3 1/4" | 000000000 | 000000 |
| 4" | 000000000 | 000000 |
Clevis Brackets with Clevis Pin | ||
| 1 1/2" | 00000000 | 000000 |
| 2" | 00000000 | 000000 |
| 2 1/2" | 00000000 | 000000 |
| 3 1/4" | 00000000 | 000000 |
| 4" | 00000000 | 000000 |
Corrosion-Resistant Hydraulic Cylinders
Made of 303 stainless steel, these hydraulic cylinders move heavy loads without corroding in wet areas. Four tie rods protect the barrel from impact and keep the end caps secure. These cylinders are double acting, meaning they pull loads as well as push them—and do so with nearly as much force. The mounting footprint meets NFPA and JIC (Joint Industrial Congress) compatibility standards.
Because they have a magnetic piston, these cylinders can be used with tie rod-mount proximity switches (not included) to indicate piston position. All have an adjustable cushion that cuts down on shock and noise.
For technical drawings and 3-D models, click on a part number.
O'all | Mounting Hole | Inlet/Outlet Connection— NPTF | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Max. Push Force, lbs. | Max. Pull Force, lbs. | Retracted Lg. | Extended Lg. | Rod Thread Size | Wd. | Ht. | Ctr.-to-Ctr. | Dia. | Pipe Size | Dash Size | Body Material | Max. Pressure, psi | Air Cushion Type | Each | |
NFPA and JIC Heavy Duty Mounting Pattern | ||||||||||||||||
1 1/2" Bore Dia. | ||||||||||||||||
| 1" | 700 | 580 | 6 13/16" | 7 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 0000000 |
| 2" | 700 | 580 | 7 13/16" | 9 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 4" | 700 | 580 | 9 13/16" | 13 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 6" | 700 | 580 | 11 13/16" | 17 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 8" | 700 | 580 | 13 13/16" | 21 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 12" | 700 | 580 | 17 13/16" | 29 13/16" | 7/16"-20 | 3 3/8" | 2" | 2 3/4" | 5/16" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
2" Bore Dia. | ||||||||||||||||
| 1" | 1,250 | 1,130 | 6 15/16" | 7 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 2" | 1,250 | 1,130 | 7 15/16" | 9 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 4" | 1,250 | 1,130 | 9 15/16" | 13 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 6" | 1,250 | 1,130 | 11 15/16" | 17 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 8" | 1,250 | 1,130 | 13 15/16" | 21 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 12" | 1,250 | 1,130 | 17 15/16" | 29 15/16" | 7/16"-20 | 4 1/8" | 2 1/2" | 3 3/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
2 1/2" Bore Dia. | ||||||||||||||||
| 1" | 1,960 | 1,840 | 7 1/16" | 8 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 000000 |
| 2" | 1,960 | 1,840 | 8 1/16" | 10 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 4" | 1,960 | 1,840 | 10 1/16" | 14 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 6" | 1,960 | 1,840 | 12 1/16" | 18 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 8" | 1,960 | 1,840 | 14 1/16" | 22 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
| 12" | 1,960 | 1,840 | 18 1/16" | 30 1/16" | 7/16"-20 | 4 5/8" | 3" | 3 7/8" | 3/8" | 3/8 | 06 | 303 Stainless Steel | 400 | Adjustable Cushion | 0000000 | 00000000 |
Mounts
Clevis Rod End
Clevis Brackets with Clevis Pin
Pivot Bracket
Clevis Pin
| For Bore Dia. | Material | Mounting Fasteners Included | Each | |
Clevis Rod Ends | ||||
|---|---|---|---|---|
| 1 1/2" | Stainless Steel | __ | 0000000 | 0000000 |
| 2", 2 1/2" | Stainless Steel | __ | 0000000 | 000000 |
Pivot Brackets | ||||
| 1 1/2" | Stainless Steel | No | 0000000 | 000000 |
| 2", 2 1/2" | Stainless Steel | No | 0000000 | 000000 |
Clevis Pins | ||||
| 1 1/2" | 17-4 Stainless Steel | __ | 0000000 | 000000 |
| 2", 2 1/2" | 17-4 Stainless Steel | __ | 0000000 | 000000 |
Clevis Brackets with Clevis Pin | ||||
| 1 1/2" | Stainless Steel | No | 0000000 | 000000 |
| 2", 2 1/2" | Stainless Steel | No | 0000000 | 00000000 |
Double-Ended Compact Hydraulic Cylinders
Push one heavy load while pulling another. These hydraulic cylinders have a rod that runs through both ends, so when it extends on one end, it retracts on the other. Built with a small body, they'll fit in tight spaces but operate with similar force to standard-sized hydraulic cylinders. This is in large part thanks to their two hydraulic ports: one port to extend the rod and another port to retract it. That means no matter which direction they're moving, they're giving it the same amount of power.
The piston is magnetic, so you can use these cylinders with sensors (sold separately) to activate relays and controllers. When the piston moves past a sensor, the sensor activates. You can use multiple sensors—one for each action you want to trigger.
For technical drawings and 3-D models, click on a part number.
Cylinders
O'all | Mounting Holes | Inlet/Outlet Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg. | Max. Push Force, lbs. | Max. Pull Force, lbs. | Rod Thread Size | Wd. | Lg. | Ht. | Ctr.-to-Ctr. | Dia. | Pipe Size | Thread Type | Body Material | Max. Pressure, psi | Air Cushion Type | Each | |
3/4" Bore Dia. | |||||||||||||||
| 1/2" | 180 | 180 | M6 × 1 mm | 1 7/16" | 3 3/8" | 1 7/16" | 1 7/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 0000000 |
| 1" | 180 | 180 | M6 × 1 mm | 1 7/16" | 4 5/8" | 1 7/16" | 1 7/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 2" | 180 | 180 | M6 × 1 mm | 1 7/16" | 6 5/8" | 1 7/16" | 1 7/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
1 1/4" Bore Dia. | |||||||||||||||
| 1" | 470 | 470 | M10 x 1.5 mm | 1 3/4" | 5 1/4" | 1 3/4" | 1 5/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 2" | 470 | 470 | M10 x 1.5 mm | 1 3/4" | 7 1/8" | 1 3/4" | 1 5/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 3" | 470 | 470 | M10 x 1.5 mm | 1 3/4" | 9 1/8" | 1 3/4" | 1 5/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 4" | 470 | 470 | M10 x 1.5 mm | 1 3/4" | 11 1/8" | 1 3/4" | 1 5/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
1 1/2" Bore Dia. | |||||||||||||||
| 1" | 830 | 830 | M10 x 1.5 mm | 2 1/16" | 5 1/4" | 2 1/16" | 1 9/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 2" | 830 | 830 | M10 x 1.5 mm | 2 1/16" | 7 1/4" | 2 1/16" | 1 9/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 3" | 830 | 830 | M10 x 1.5 mm | 2 1/16" | 9 1/4" | 2 1/16" | 1 9/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 4" | 830 | 830 | M10 x 1.5 mm | 2 1/16" | 11 1/8" | 2 1/16" | 1 9/16" | 7/32" | 1/8 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
2" Bore Dia. | |||||||||||||||
| 1" | 1,290 | 1,290 | __ | 2 1/2" | 5 7/8" | 2 1/2" | 1 15/16" | 1/4" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 2" | 1,290 | 1,290 | __ | 2 1/2" | 7 3/4" | 2 1/2" | 1 15/16" | 1/4" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 3" | 1,290 | 1,290 | __ | 2 1/2" | 9 3/4" | 2 1/2" | 1 15/16" | 1/4" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 4" | 1,290 | 1,290 | __ | 2 1/2" | 11 3/4" | 2 1/2" | 1 15/16" | 1/4" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
2 1/2" Bore Dia. | |||||||||||||||
| 1" | 2,200 | 2,200 | __ | 3 1/16" | 6" | 3 1/16" | 2 3/8" | 11/32" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 2" | 2,200 | 2,200 | __ | 3 1/16" | 8" | 3 1/16" | 2 3/8" | 11/32" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 3" | 2,200 | 2,200 | __ | 3 1/16" | 9 7/8" | 3 1/16" | 2 3/8" | 11/32" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 4" | 2,200 | 2,200 | __ | 3 1/16" | 11 7/8" | 3 1/16" | 2 3/8" | 11/32" | 1/4 | BSPT | Aluminum | 500 | No Cushion | 0000000 | 000000 |
Sensors
Sensor
| AC Voltage | DC Voltage | Solid State Output | With Switch Component | Each | |
Reed Switch—for 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" Bore Dia. | |||||
|---|---|---|---|---|---|
| 24V AC, 48V AC, 100V AC | 24V DC, 48V DC, 100V DC | __ | __ | 00000000 | 000000 |
| __ | 24V DC, 100V DC | __ | LED | 00000000 | 00000 |
Solid State Switch—for 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 4" Bore Dia. | |||||
| __ | 24V DC | NPN | LED | 00000000 | 00000 |
| __ | 24V DC | PNP | LED | 00000000 | 00000 |
Round Body Hydraulic Cylinders
More compact than hydraulic cylinders with external tie rods, these cylinders have a round body that fits better into tight spaces and have a more streamlined appearance. To further minimize their footprint, they operate without an air cushion. These cylinders are double acting, meaning they both push and pull loads. They use two hydraulic ports, one to extend the piston and one to retract it. Because the piston is magnetic, these can be used with sensors to indicate piston position.
For technical drawings and 3-D models, click on a part number.
Inlet/Outlet Connection— BSPT | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stroke Lg., mm | Max. Push Force, lbs. | Max. Pull Force, lbs. | Retracted Lg., mm | Extended Lg., mm | Rod Thread Size | O'all Dia., mm | Pipe Size | Dash Size | Body Material | Max. Pressure, psi | Air Cushion Type | Each | |
20 mm Bore Dia. | |||||||||||||
| 25 | 223 | 167 | 163 | 188 | M8 × 1.25 mm | 30 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 50 | 223 | 167 | 188 | 238 | M8 × 1.25 mm | 30 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 75 | 223 | 167 | 213 | 288 | M8 × 1.25 mm | 30 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 100 | 223 | 167 | 238 | 338 | M8 × 1.25 mm | 30 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 125 | 223 | 167 | 263 | 388 | M8 × 1.25 mm | 30 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 150 | 223 | 167 | 288 | 438 | M8 × 1.25 mm | 30 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
25 mm Bore Dia. | |||||||||||||
| 25 | 400 | 311 | 168 | 193 | M10 × 1.25 mm | 32 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 50 | 400 | 311 | 193 | 243 | M10 × 1.25 mm | 32 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 75 | 400 | 311 | 218 | 293 | M10 × 1.25 mm | 32 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 100 | 400 | 311 | 243 | 343 | M10 × 1.25 mm | 32 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 125 | 400 | 311 | 268 | 393 | M10 × 1.25 mm | 32 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 150 | 400 | 311 | 293 | 443 | M10 × 1.25 mm | 32 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
32 mm Bore Dia. | |||||||||||||
| 25 | 624 | 384 | 184 | 209 | M14 × 1.5 mm | 40 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 50 | 624 | 384 | 209 | 259 | M14 × 1.5 mm | 40 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 75 | 624 | 384 | 234 | 309 | M14 × 1.5 mm | 40 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 100 | 624 | 384 | 259 | 359 | M14 × 1.5 mm | 40 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 125 | 624 | 384 | 284 | 409 | M14 × 1.5 mm | 40 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
| 150 | 624 | 384 | 309 | 459 | M14 × 1.5 mm | 40 | 1/8 | 02 | Aluminum | 500 | No Cushion | 0000000 | 00000 |
40 mm Bore Dia. | |||||||||||||
| 25 | 897 | 423 | 208 | 233 | M16 × 1.5 mm | 48 | 1/4 | 04 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 50 | 897 | 423 | 233 | 283 | M16 × 1.5 mm | 48 | 1/4 | 04 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 75 | 897 | 423 | 258 | 333 | M16 × 1.5 mm | 48 | 1/4 | 04 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 100 | 897 | 423 | 283 | 383 | M16 × 1.5 mm | 48 | 1/4 | 04 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 125 | 897 | 423 | 308 | 433 | M16 × 1.5 mm | 48 | 1/4 | 04 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
| 150 | 897 | 423 | 333 | 483 | M16 × 1.5 mm | 48 | 1/4 | 04 | Aluminum | 500 | No Cushion | 0000000 | 000000 |
Rod End Nuts
| For Bore Size, mm | O'all Dia., mm | ID, mm | Center Length | Gender | Thread Size | Mounting Hardware Included | Material | Each | |
| 20 | 20 | 9 | 36 mm | Female | M8 × 1.25 mm | No | Nickel-Plated Steel | 0000000 | 00000 |
| 25, 32 | 20 | 9 | 38 mm | Female | M10 × 1.25 mm | No | Nickel-Plated Steel | 0000000 | 0000 |
| 32, 40 | 24 | 12 | 50 mm | Female | M14 × 1.5 mm | No | Nickel-Plated Steel | 0000000 | 00000 |
| 32 | 24 | 12 | __ | Female | M14 × 1.5 mm | No | Nickel-Plated Steel | 0000000 | 00000 |